Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC218BMS8GETR is a GAAS double balanced RF mixer with 50 ohm impedance. It operates from 3.5 GHz to 8 GHz, offering a max conversion loss of 8.5 dB and can handle up to 13 dBm CW input power. Ideal for RF/microwave applications requiring high performance in surface mount setups.
Median Price
$8.045
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$4.820
100+ parts
$3.670
1k+ parts
$3.530
10k+ parts
-
Analog Devices Inc
$7.460
$5.650
$4.977
$4.871
DigiKey
$8.630
$6.540
$6.213
Mouser Electronics
$5.820
$5.240
Newark
$8.710
$6.600
$6.270
Element14
$12.430
$9.420
$8.760
Verical
$3.995
Farnell
$5.730
$5.360
Digiode
$4.579
Vyrian
Chip Stock
Parana Technologies
$1.395
$1.297
IDEA Electronic Components Group
$1.500
$1.425
DigiPath Technology Company
$2.340
$2.246
Advanced Electronics
$2.721
$2.476
$2.231
Ampacity Inc.
$4.100
Semicontronic
$3.998
$3.977
Corphita
$4.338
Continental Prestige Electronics
$6.510
$4.880
$3.660
Epart123
$5.770
Authorized Procurement Solutions
RC Electronics
$4.920
$4.460
$4.300
A-Z Elektronik GmbH
Kepictronics
PLASTIC/EPOXY material provides durability and protection, making the product reliable for long-term use.
With a maximum input power of 13 dBm, this mixer can handle high power levels without distortion or damage.
Component construction ensures high performance and reliability in various RF and microwave applications.
Having 8 terminals allows for versatile connectivity options and integration into different circuit designs.
The high maximum operating temperature of 85 °C ensures stable performance even in demanding thermal conditions.
The low minimum operating temperature of -40 °C enables operation in cold environments without compromising performance.
Matte Tin finish provides good conductivity and durability, while the annealed feature ensures reliability during soldering.
Gallium Arsenide (GAAS) technology offers high-speed operation and low noise performance, making it suitable for RF and microwave applications.
Double balanced design helps in reducing even-order harmonics, improving linearity and signal quality.
Having a characteristic impedance of 50 ohm ensures compatibility with standard RF systems and minimizes signal reflections.
With a low maximum conversion loss of 8.5 dB, this mixer provides efficient frequency conversion with minimal signal loss.
The ability to operate at a minimum frequency of 3500 MHz makes this mixer suitable for a wide range of RF and microwave applications.
Surface mount design allows for easy integration onto PCBs and saves space, making it suitable for compact RF systems.
The high maximum operating frequency of 8000 MHz makes this mixer ideal for high-frequency RF and microwave applications.
RF/Microwave Mixers HMC218BMS8GETR attributes and parameters. Explore more RF/Microwave Mixers devices from Analog Devices
Additional Features:
Characteristic Impedance:
Construction:
Maximum Conversion Loss:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
RF or Microwave Device Type:
Technology:
Terminal Finish:
HMC218BMS8GETR RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev Site Transfer 6/May/2019
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Weitron Technology
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ROHM
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
HMC351S8ERTR
Analog Devices
Analog Devices' HMC351S8ERTR is an RF/Microwave Mixer with 8 terminals, operating b/w -40°C to 85°C. Built with GaAs technology, it features a plastic/epoxy body and surface mounting. Ideal for applications requiring high-frequency signal mixing in various electronic systems.
HMC1042LC4TR
Analog Devices' HMC1042LC4TR is a GAAS RF/Microwave Mixer with 24 terminals. It operates b/w -40 °C to 85°C, featuring image rejection technology. Ideal for surface mount applications in RF and microwave systems.
HMC525A-SX
RF/Microwave Mixers;
PMB2210T
Infineon Technologies
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 70 Cel;
HMC215LP4
Analog Devices' HMC215LP4 is a RF/Microwave Mixer with 24 terminals, operating from -40 to 85°C. It features a max input power of 22 dBm, double balanced technology, and operates b/w 1700-4000 MHz. Ideal for applications requiring high frequency conversion with low loss and impedance matching in surface mount configurations.
HMC351S8ETR
Analog Devices' HMC351S8ETR is a GAAS technology RF mixer with 8 terminals. It operates b/w -40 °C to 85°C, making it suitable for various RF/microwave applications. The surface mount package body material is plastic/epoxy, ideal for double balanced circuits.
HMC218BMS8GE
Analog Devices' HMC218BMS8GE is a RF/Microwave Mixer with 50 ohm impedance, 3500-8000 MHz frequency range, and 8.5 dB conversion loss. It can handle up to 13 dBm CW input power, making it ideal for high-frequency applications in temperatures ranging from -40°C to 85°C.
HA21009MS(5V)
Renesas Electronics
DOUBLE BALANCED; Construction: COMPONENT;
HA22001T(5V)
AMMC-6530-W50
Broadcom
AMMC-6530-W50 by Broadcom is a RF/Microwave Mixer with max input power of 25 dBm. It features image rejection construction, 50 ohm impedance, and 8 dB conversion loss. Ideal for applications requiring frequencies b/w 5-30 GHz.
IAM-93516-TR1
TRIPLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
CM-1
Qorvo
Qorvo's CM-1 is a double balanced RF mixer with 8 terminals, operating from 0.5 MHz to 500 MHz. It offers a max conversion loss of 8.5 dB and can handle up to 23.01 dBm CW input power. Ideal for applications requiring high-performance RF/microwave mixing in metal package construction.
HMC260LC3B
Analog Devices' HMC260LC3B is a RF/Microwave Mixer with GaAs technology. It operates from 14 GHz to 26 GHz, offering a max conversion loss of 12 dB and can handle up to 15 dBm CW input power. Ideal for applications requiring high-frequency signal mixing in a compact surface-mount package.
ADL5353XCPZ-R7
ADL5353XCPZ-R7 by Analog Devices is a BICMOS RF/Microwave Mixer with 20 terminals, operating from -40 to 85°C. It requires a 5V power supply and features a surface mount package body ideal for various applications in the RF/microwave domain.
HMC8191LC4TR
Analog Devices' HMC8191LC4TR is an RF/Microwave Mixer with 24 dBm CW input power, 11.5 dB conversion loss, and 50 ohm impedance. It operates from -40 to 85°C, suitable for image rejection applications in the frequency range of 6-26.5 GHz.
MAX9995ETX+T
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 36; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Package Equivalence Code: LCC36,.25SQ,20;
UPC1685G
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 70 Cel; JESD-609 Code: e0;
LTC5543IUH#TRPBF
LTC5543IUH#TRPBF by Analog Devices is a RF/Microwave Mixer with 50 ohm impedance, operating from 2300-4000 MHz. It can handle up to 15 dBm CW input power and operates b/w -40 to 85 °C. Ideal for applications requiring double balanced RF or microwave components.
HMC215LP4E
Analog Devices' HMC215LP4E is a RF/Microwave Mixer with 24 terminals, operating from -40 to 85°C. It has a max input power of 22 dBm, double balanced technology, and operates b/w 1700-4000 MHz. Ideal for applications requiring high frequency conversion with low loss and surface mount installation.
HMC528
Analog Devices' HMC528 is an RF/Microwave Mixer with 20 dBm CW input power, 11 dB conversion loss, and 50 ohm impedance. Ideal for image rejection applications in the frequency range of 11-16 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
HMC213BMS8ETR
HMC213BMS8ETR by Analog Devices is a RF/Microwave Mixer with 50 ohm impedance, operating frequency range of 1.5-4.5 GHz, and max conversion loss of 11 dB. It can handle up to 13 dBm input power and operates in temperatures from -40°C to 85°C. Ideal for applications requiring double balanced mixers in RF systems.
HMC292ALC3B
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Minimum Operating Frequency: 14000 MHz; Maximum Input Power (CW): 18 dBm;
HMC219BMS8GETR
DOUBLE BALANCED; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Maximum Conversion Loss: 11 dB; JESD-609 Code: e3; Construction: COMPONENT;
HMC213BMS8E
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Maximum Conversion Loss: 11 dB; Terminal Finish: MATTE TIN; Maximum Operating Frequency: 4500 MHz;
HMC207AS8ETR
Hittite Microwave
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SOP8,.25;
HMC213BMS8GE
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Conversion Loss: 10 dB;
HMC213BMS8GETR
DOUBLE BALANCED;
HMC220AMS8ETR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
HMC292ALC3BTR
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 14000 MHz; Maximum Operating Frequency: 30000 MHz; Characteristic Impedance: 50 ohm;
HMC292ALC3BTR-R5
DOUBLE BALANCED; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Minimum Operating Frequency: 14000 MHz; Maximum Conversion Loss: 12.5 dB; Maximum Operating Temperature: 85 Cel;
HMC208AMS8E
DOUBLE BALANCED; Characteristic Impedance: 50 ohm; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 13 dBm; Maximum Operating Frequency: 2000 MHz;
HMC208AMS8ETR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP8,.19;
HMC214MS8
HMC208AMS8TR
HMC214MS8E
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC213AMS8
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 1500 MHz;
HMC213AMS8E
HMC207AS8TR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved