Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
Median Price
$4.360
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
$4.500
100+ parts
-
1k+ parts
$4.220
10k+ parts
$4.070
Verical
Digiode
$4.275
Nova Conductors
$4.790
Chip Stock
Vyrian
Inventory MP
Bristol Electronics
Semicontronic
$2.570
$2.506
$2.493
Parana Technologies
$2.586
$2.405
IDEA Electronic Components Group
$2.781
$2.642
Corphita
$4.050
DigiPath Technology Company
$4.338
$4.165
Continental Prestige Electronics
$4.694
RC Electronics
$8.810
$8.000
$7.710
Perfect Parts
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Argo Parts USA
Lixinc
Netroflash
$4.550
$4.455
RF/Microwave Mixers HMC207AS8ETR attributes and parameters. Explore more RF/Microwave Mixers devices from Hittite Microwave
Mounting Feature:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
RF or Microwave Device Type:
Sub-Category:
Technology:
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
EU2B-YS303C
Idec
ROTARY SWITCH;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Yangzhou Yangjie Electronics
Weitron Technology
MICRODIODE ELECTRONICS SHENZHEN CO LTD
Rfe International
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
HMC402MS8E
Analog Devices
Analog Devices' HMC402MS8E is a RF/Microwave Mixer with 27 dBm CW input power, 10.5 dB conversion loss, and 50 ohm impedance. Ideal for applications requiring double balanced mixers in the frequency range of 1800-2200 MHz.
HMC329LC3B
Analog Devices' HMC329LC3B is a RF/Microwave Mixer with 24000-32000 MHz frequency range, 50 ohm impedance, and 12.5 dB max conversion loss. It operates b/w -40 to 85°C, handles up to 13 dBm CW power, and features double balanced design for various RF applications.
CM-1
Vari-l
DOUBLE BALANCED; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Package Body Material: METAL; Minimum Operating Temperature: -54 Cel; Maximum Conversion Loss: 8.5 dB;
HMC1056LP4BETR
HMC1056LP4BETR by Analog Devices is a RF/Microwave Mixer with 20 terminals, operating frequency range of 8-12 GHz, and max input power of 16 dBm. It utilizes GaAs technology for image rejection applications in the temperature range of -40 to 85°C. The component is designed for surface mounting with a characteristic impedance of 50 ohms and max conversion loss of 11 dB.
HMC215LP4
Analog Devices' HMC215LP4 is a RF/Microwave Mixer with 24 terminals, operating from -40 to 85°C. It features a max input power of 22 dBm, double balanced technology, and operates b/w 1700-4000 MHz. Ideal for applications requiring high frequency conversion with low loss and impedance matching in surface mount configurations.
HMC219BMS8GE
Analog Devices' HMC219BMS8GE is a RF/Microwave Mixer with 25 dBm CW input power, 11 dB conversion loss, and 50 ohm impedance. It operates from -40 to 85 °C and covers frequencies from 2500 MHz to 7000 MHz. Ideal for applications requiring high-performance double balanced mixers in RF/microwave systems.
RMS-30
Mini-circuits
The Mini-circuits RMS-30 is a ceramic RF mixer with 6 terminals, operating from 200 MHz to 3 GHz. It offers a low conversion loss of 9.8 dB and can handle up to 17 dBm input power. Ideal for RF/microwave applications requiring double balanced mixers in surface mount packages.
LTC5549IUDB#PBF
LTC5549IUDB#PBF by Analog Devices is a RF/Microwave Mixer with 20 dBm CW input power, operating from -40 to 105 °C. It features double balanced construction, 50 ohm impedance, and operates b/w 2-14 GHz. Ideal for high-frequency applications requiring precise signal mixing in various electronic systems.
AD8343ARU
AD8343ARU by Analog Devices is a RF/Microwave Mixer with 14 terminals, operating from -40 to 85°C. It has a VSWR of 2, operates at frequencies up to 2500 MHz, and requires a 5V power supply. Ideal for applications requiring double balanced mixers in the RF/microwave domain.
AD8344ACPZ-WP
AD8344ACPZ-WP by Analog Devices is a RF/Microwave Mixer with 16 terminals, operating frequency range of 400-1200 MHz, and max input power of 12 dBm. It is a double balanced component suitable for applications requiring high-frequency signal mixing in the temperature range of -40 to 85 °C.
UPC8002GR-A
Renesas Electronics
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel;
HMC219AMS8ETR
Analog Devices' HMC219AMS8ETR is a GAAS technology RF/Microwave Mixer with 8 terminals and matte tin finish. Operating temperature ranges from -40 °C to 85°C, making it suitable for various applications requiring double balanced surface mount devices in plastic/epoxy packages.
MAX9995ETX+T
MAX9995ETX+T by Analog Devices is a RF/Microwave Mixer with 20 dBm CW input power, 1.5 VSWR, and 5V supply. It operates b/w -40 to 85 °C, has BICMOS tech, and double balanced design. Ideal for applications requiring high-frequency mixing in the range of 1700-2200 MHz.
HMC338LC3BRTR
Analog Devices' HMC338LC3BRTR is a GAAS RF/Microwave Mixer with 12 terminals, operating from -40 to 85°C. It requires a 4V power supply and draws a max current of 40mA. This ceramic-packaged mixer is ideal for surface mount applications in various RF systems.
LTC5552IUDB#TRMPBF
LTC5552IUDB#TRMPBF by Analog Devices is a RF/Microwave Mixer with 20 dBm CW input power, 3.3V supply, and 50 ohm impedance. It operates from -40 to 105°C, suitable for applications requiring double balanced mixers in the frequency range of 3-20 GHz.
HMC488MS8G
Analog Devices' HMC488MS8G is a RF/Microwave Mixer with 50 ohm impedance, operating from 4-7 GHz. It offers a max conversion loss of 10.5 dB and can handle up to 13 dBm CW input power. Ideal for applications requiring high frequency mixing in environments ranging from -40°C to 85°C.
ADRF6603ACPZ
Analog Devices' ADRF6603ACPZ is a BICMOS RF/Microwave Mixer with 40 terminals, operating b/w -40°C to 85°C. It requires a 5V power supply and features a surface mount package made of plastic/epoxy. Ideal for applications requiring high-frequency signal mixing in various electronic systems.
HMC220AMS8ETR
Hittite Microwave
TA8116F
Toshiba
DOUBLE BALANCED;
LTC5562IUC#TRPBF
LTC5562IUC#TRPBF by Analog Devices is a RF/Microwave Mixer with 15 dBm CW input power, 0-9000 MHz frequency range, and 50 ohm impedance. It operates from -40 to 105 °C and features double balanced construction. Ideal for high-frequency signal mixing applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC213BMS8ETR
HMC213BMS8ETR by Analog Devices is a RF/Microwave Mixer with 50 ohm impedance, operating frequency range of 1.5-4.5 GHz, and max conversion loss of 11 dB. It can handle up to 13 dBm input power and operates in temperatures from -40°C to 85°C. Ideal for applications requiring double balanced mixers in RF systems.
HMC292ALC3B
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Minimum Operating Frequency: 14000 MHz; Maximum Input Power (CW): 18 dBm;
HMC219BMS8GETR
DOUBLE BALANCED; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Maximum Conversion Loss: 11 dB; JESD-609 Code: e3; Construction: COMPONENT;
HMC213BMS8E
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Maximum Conversion Loss: 11 dB; Terminal Finish: MATTE TIN; Maximum Operating Frequency: 4500 MHz;
HMC207AS8ETR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SOP8,.25;
HMC213BMS8GE
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Conversion Loss: 10 dB;
HMC213BMS8GETR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
HMC292ALC3BTR
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 14000 MHz; Maximum Operating Frequency: 30000 MHz; Characteristic Impedance: 50 ohm;
HMC292ALC3BTR-R5
DOUBLE BALANCED; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Minimum Operating Frequency: 14000 MHz; Maximum Conversion Loss: 12.5 dB; Maximum Operating Temperature: 85 Cel;
HMC208AMS8E
DOUBLE BALANCED; Characteristic Impedance: 50 ohm; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 13 dBm; Maximum Operating Frequency: 2000 MHz;
HMC208AMS8ETR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP8,.19;
HMC214MS8
HMC208AMS8TR
HMC214MS8E
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC213AMS8
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 1500 MHz;
HMC213AMS8E
HMC207AS8TR
HMC207S8TR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved