Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC505LP4E is a RF amplifier with 50 ohm impedance, operating frequency range of 6800-7400 MHz, and VSWR of 2. Ideal for narrowband low-power applications in temperatures from -40 to 85°C. Package: PLASTIC/EPOXY, Technology: BIPOLAR, Mounting: SURFACE MOUNT.
Median Price
$27.750
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$21.300
100+ parts
$16.050
1k+ parts
$15.720
10k+ parts
-
Analog Devices Inc
$21.331
$15.850
Mouser Electronics
$29.410
$23.580
$23.080
Newark
$31.300
$23.730
$23.210
DigiKey
$32.140
$24.744
$23.591
Element14
$42.230
$31.850
$31.200
Arrow
$19.380
Verical
Rochester
$19.810
$17.720
$16.680
Digiode
$15.542
Nova Conductors
$18.790
Component Sense
Vyrian
Parana Technologies
$1.951
$1.815
IDEA Electronic Components Group
$2.098
$1.993
DigiPath Technology Company
$3.273
$3.142
Advanced Electronics
$3.514
$3.198
$2.881
Ampacity Inc.
$14.040
Semicontronic
$13.689
$13.619
Corphita
$14.724
Component Stockers USA
$17.980
$17.620
Continental Prestige Electronics
$20.530
Authorized Procurement Solutions
Lixinc
GreenTree Electronics
Argo Parts USA
Perfect Parts
The use of plastic/epoxy material for the package body provides durability and resistance to harsh environments, making the amplifier suitable for a wide range of applications.
With a low VSWR of 2, this amplifier ensures efficient power transfer and minimal signal reflection, resulting in improved performance and reliability.
The component-based construction allows for easy integration into existing systems and customization according to specific requirements, making it a versatile choice for various RF and microwave applications.
Operating at a low voltage of 3V, this amplifier offers energy-efficient performance and reduces power consumption, making it suitable for battery-powered devices and portable applications.
With a high number of terminals, this amplifier offers flexibility in connection options and signal routing, enabling complex RF and microwave circuit designs and configurations.
The wide operating temperature range of up to 85°C ensures reliable performance in various thermal conditions, making this amplifier suitable for outdoor and industrial applications.
With a low minimum operating temperature of -40°C, this amplifier can withstand extreme cold environments, providing consistent performance in harsh conditions.
The matte tin terminal finish offers good solderability and corrosion resistance, ensuring reliable connections and long-term durability for the amplifier.
The use of bipolar technology in the amplifier design enables high linearity and low noise performance, making it suitable for demanding RF and microwave applications that require precise signal amplification.
Designed for narrow band applications and low power requirements, this amplifier offers efficient signal amplification and energy-saving operation, making it ideal for communication systems and instrumentation.
With a standard characteristic impedance of 50 ohms, this amplifier ensures impedance matching with common RF components and cables, reducing signal loss and improving overall system performance.
With a minimum operating frequency of 6800 MHz, this amplifier is well-suited for high-frequency RF and microwave applications, providing reliable performance in demanding frequency ranges.
The surface mounting feature simplifies the installation process and allows for compact and space-efficient integration of the amplifier into circuit boards and modules.
Capable of operating at frequencies up to 7400 MHz, this amplifier offers broad frequency coverage and high bandwidth, making it suitable for a wide range of RF and microwave applications.
RF & Microwave Amplifiers HMC505LP4E attributes and parameters. Explore more RF & Microwave Amplifiers devices from Analog Devices
Additional Features:
Characteristic Impedance:
Construction:
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
HMC505LP4E RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
Zetex Plc
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
MGA-61563-TR2G
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Supply Current: 48 mA;
BGU8052X
NXP Semiconductors
WIDE BAND LOW POWER;
HMC326MS8GE
Hittite Microwave
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Frequency: 4500 MHz;
MAX2659ELT/V+
Analog Devices
Analog Devices' MAX2659ELT/V+ is a BICMOS RF amplifier with 16.5 dB gain and 50 ohm impedance. It operates at temperatures from -40 to 85 °C, with a max input power of 10 dBm. Ideal for narrow band low power applications, it has a compact surface mount package with 6 terminals.
HMC441LM1
HMC441LM1 by Analog Devices is a wide band low power RF amplifier with 11 dB gain and 15 dBm max input power. It operates b/w 7-15.5 GHz, has a characteristic impedance of 50 ohms, and requires a 5V power supply. Ideal for RF & microwave applications requiring high performance in a compact package.
SKY65624-682LF
Skyworks Solutions
SKY65624-682LF by Skyworks Solutions is a RF amplifier with 16dB gain, operating frequency range of 1559-1606MHz. It has VSWR of 1.5, BICMOS technology, and can handle up to 0dBm input power. Ideal for narrowband low-power applications in RF & microwave systems due to its compact size and surface mount feature.
MGA-23003-TR1G
Broadcom
Broadcom's MGA-23003-TR1G is a GAAS RF amplifier with 32dB gain, operating b/w 3.3-3.8GHz. It has a max input power of 15dBm and is ideal for narrowband medium-power applications in the RF & Microwave field.
HMC797LP5ETR
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 10;
HMC564LC4TR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Maximum Input Power (CW): 5 dBm;
HMC1040LP3CE
HMC1040LP3CE by Analog Devices is a wide band low power RF amplifier with 17 dB gain and 50 ohm impedance. It operates from 24 to 43.5 GHz, with a max input power of 5 dBm and a supply current of 85 mA. This PHEMT technology component is ideal for RF and microwave applications requiring high performance in a compact package.
ADL5536ARKZ-R7
ADL5536ARKZ-R7 by Analog Devices is a wide band low power RF amplifier with 18.1 dB gain, suitable for frequencies ranging from 20 MHz to 1000 MHz. It can handle a max input power of 20 dBm and operates in temperatures b/w -40°C to 85°C. Ideal for RF and microwave applications requiring high gain amplification within the specified frequency range.
NBB-310-T1
Rf Micro Devices
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: CERAMIC; Technology: BIPOLAR; Gain: 9 dB;
ALM-32220
ALM-32220 by Broadcom is a wide band high power RF amplifier with 13.5 dB gain, operating from 1700 to 2700 MHz. It can handle up to 28 dBm CW input power and has a characteristic impedance of 50 ohm. Ideal for applications requiring high power amplification in RF & Microwave systems.
TQP3M9019
Qorvo
TQP3M9019 by Qorvo is a wide band medium power RF amplifier with a gain of 20 dB. It operates at frequencies ranging from 50 MHz to 4000 MHz and can handle a max input power of 23 dBm. This component, with its surface mount package, is commonly used in RF and microwave applications.
MGA-62563-TR1
Broadcom's MGA-62563-TR1 is a GAAS RF amplifier with 13dB gain, operating from 100MHz to 3GHz. It has a max input power of 21dBm and VSWR of 2, suitable for wideband low-power applications. The component features surface mounting and requires 3/5V power supplies, drawing a max current of 77mA.
MGA-72543-TR2G
Broadcom's MGA-72543-TR2G is a GAAS RF amplifier with 9.2 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 20 dBm and VSWR of 2.1, suitable for wideband low-power applications in RF and microwave systems.
ADL5521ACPZ-R7
ADL5521ACPZ-R7 by Analog Devices is a wide band low power RF amplifier with a gain of 10.5 dB, operating frequency range from 400 MHz to 4000 MHz, and max input power of 20 dBm. It is constructed using GaAs technology, has a characteristic impedance of 50 ohm, and is suitable for applications requiring high-frequency amplification in RF and microwave systems.
MGA-31189-TR1G
Broadcom's MGA-31189-TR1G is a GAAS RF amplifier with 19dB gain, operating from 50MHz to 2000MHz. It has a max input power of 25dBm and requires a 5V power supply, making it suitable for wideband medium-power applications in RF and microwave systems.
RDA1005LSR
Qorvo's RDA1005LSR is a wide band low power RF amplifier with 15.5 dB gain, operating from 50 MHz to 4000 MHz. It has a max input power of 20 dBm and operates on a 5V power supply. Ideal for applications requiring surface mount construction in RF & microwave systems.
TQP3M9008
Triquint Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; No. of Functions: 1; Construction: COMPONENT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
Analog Devices' HMC564LC4TR is a wide band low power RF amplifier with 14 dB gain, operating from 7-14 GHz. It has a max input power of 20 dBm and operates on a 3V supply, drawing up to 75 mA. Ideal for RF and microwave applications requiring high frequency amplification in compact designs.
HMC532LP4E
WIDE BAND LOW POWER; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 7100 MHz; Minimum Operating Temperature: -40 Cel; Maximum Voltage Standing Wave Ratio: 2; Construction: COMPONENT;
WIDE BAND LOW POWER; Construction: COMPONENT; Maximum Voltage Standing Wave Ratio: 2; JESD-609 Code: e3; Maximum Operating Frequency: 7900 MHz; Minimum Operating Frequency: 7100 MHz;
HMC5805ALS6TR
Analog Devices' HMC5805ALS6TR is a wide band low power RF amplifier with 9 dB gain and 22 dBm max input power. Operating from -40 to 85°C, it covers frequencies up to 40 GHz. Ideal for RF and microwave applications requiring high performance in a compact form factor.
HMC549MS8G
HMC549MS8G by Analog Devices is a wide band low power RF amplifier with 2 dB gain, operating from 40 MHz to 960 MHz. It has a max input power of 0 dBm and operates on a 5V power supply. This surface mount component is ideal for RF and microwave applications requiring amplification in the frequency range specified.
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
HMC5805ALS6
WIDE BAND LOW POWER; Maximum Input Power (CW): 22 dBm; Minimum Operating Frequency: 0 MHz; Terminal Finish: GOLD OVER NICKEL; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 40000 MHz;
HMC564LC4TR-R5
WIDE BAND LOW POWER; Maximum Operating Frequency: 14000 MHz; Maximum Input Power (CW): 20 dBm; Characteristic Impedance: 50 ohm; Gain: 14 dB; Minimum Operating Frequency: 7000 MHz;
HMC516LC5TR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: CERAMIC; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
HMC516LC5TR by Analog Devices is a GAAS wide band low power RF amplifier with 1 function and 32 terminals. It operates at temperatures ranging from -40 to 85°C and requires a power supply of 3V, drawing a max current of 88mA. This surface mount package is suitable for various RF and microwave applications.
HMC549MS8GTR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC517LC4
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Construction: COMPONENT;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC516LC5
HMC516LC5 by Analog Devices is a wide band low power RF amplifier with 18 dB gain and 50 ohm impedance. It operates from 9-18 GHz, with a max input power of 5 dBm. Ideal for RF & microwave applications requiring high performance in a compact ceramic package.
HMC506LP4E
NARROW BAND LOW POWER; Additional Features: LOW NOISE; Maximum Voltage Standing Wave Ratio: 2; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Maximum Operating Frequency: 8700 MHz;
NARROW BAND LOW POWER; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 7800 MHz; Maximum Operating Frequency: 8700 MHz; Maximum Operating Temperature: 85 Cel;
HMC561LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved