Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC218BMS8GE is a RF/Microwave Mixer with 50 ohm impedance, 3500-8000 MHz frequency range, and 8.5 dB conversion loss. It can handle up to 13 dBm CW input power, making it ideal for high-frequency applications in temperatures ranging from -40°C to 85°C.
Median Price
$8.045
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$5.250
100+ parts
$4.000
1k+ parts
-
10k+ parts
Analog Devices Inc
$7.460
$5.650
$4.977
Mouser Electronics
$8.630
$5.850
$5.400
DigiKey
$6.540
$5.766
Newark
$8.710
$6.600
$6.050
Farnell
$8.970
$5.730
$5.360
Element14
$12.430
$9.420
$8.600
Arrow
$5.571
$4.790
Verical
Richardson RFPD
$4.920
Vyrian
$4.233
Digiode
$4.608
Chip Stock
Nova Conductors
Cogito LLC
Parana Technologies
$2.129
$1.980
IDEA Electronic Components Group
$2.289
$2.175
DigiPath Technology Company
$3.571
$3.428
Semicontronic
$3.600
$3.510
$3.492
Corphita
$4.365
Continental Prestige Electronics
$6.650
$4.990
$3.860
Epart123
$5.770
RC Electronics
Kepictronics
Netroflash
With a high maximum input power rating of 13 dBm, this mixer can handle strong input signals without distortion, making it suitable for high-power applications.
Being a component level device, this mixer offers flexibility for integration into various RF/microwave systems, making it versatile for different design requirements.
The high maximum operating temperature of 85°C ensures reliable performance even in harsh environmental conditions, increasing the overall durability of the product.
The low minimum operating temperature of -40°C allows for operation in cold environments, making this mixer suitable for a wide range of operating conditions.
The matte tin terminal finish provides good conductivity and corrosion resistance, ensuring optimal signal integrity and long-term reliability of the mixer.
Being a double balanced mixer, this product offers improved spurious suppression and higher linearity, resulting in better performance in mixing RF or microwave signals.
With a standard characteristic impedance of 50 ohms, this mixer can easily interface with other RF components or transmission lines, simplifying system integration.
Despite its high maximum conversion loss of 8.5 dB, this mixer compensates with other performance factors such as linearity and spurious suppression, making it a balanced choice for various applications.
With a low minimum operating frequency of 3500 MHz, this mixer is suitable for applications requiring frequency downconversion or mixing in the lower RF/microwave bands.
The high maximum operating frequency of 8000 MHz allows this mixer to cover a wide range of RF and microwave signals, making it versatile for various communication or radar systems.
RF/Microwave Mixers HMC218BMS8GE attributes and parameters. Explore more RF/Microwave Mixers devices from Analog Devices
Characteristic Impedance:
Construction:
Maximum Conversion Loss:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
HMC218BMS8GE RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev Site Transfer 6/May/2019
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
LM358N
STMicroelectronics
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Ksl Microdevices
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
North American Philips Discrete Products Div
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
National Semiconductor
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
HMC1043LC3
Analog Devices
TRIPLE BALANCED; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4;
LTC5567IUF#PBF
LTC5567IUF#PBF by Analog Devices is a CMOS RF/Microwave Mixer with 16 terminals, operating from 300 MHz to 4 GHz. It has a max input power of 15 dBm and operates on a 3.3V supply, making it ideal for double balanced applications requiring high frequency mixing capabilities.
LTC5556IUH#TRPBF
LTC5556IUH#TRPBF by Analog Devices is a RF/Microwave Mixer with 20 dBm CW input power, 1.92 VSWR, and 3.3V supply. It operates from -40 to 105 °C, suitable for applications requiring single balanced CMOS technology in the frequency range of 1500-7000 MHz.
HMC168C8
Analog Devices' HMC168C8 is a RF/Microwave Mixer with 4500-8000 MHz frequency range, 10 dB max conversion loss, and 13 dBm CW input power. It's a double balanced component ideal for high-frequency applications requiring precise signal mixing in temperatures from -55 to 85°C.
SA602AD-T
Philips Semiconductors
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel;
AD8344ACPZ-WP
AD8344ACPZ-WP by Analog Devices is a RF/Microwave Mixer with 16 terminals, operating frequency range of 400-1200 MHz, and max input power of 12 dBm. It is a double balanced component suitable for applications requiring high-frequency signal mixing in the temperature range of -40 to 85 °C.
NE600D-T
NXP Semiconductors
DOUBLE BALANCED; Maximum Operating Frequency: 1200 MHz; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel;
MAX9984ETP+
Maxim Integrated
RF/Microwave Mixers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Terminal Finish: MATTE TIN;
HMC521ALC4
HMC521ALC4 by Analog Devices is an RF/Microwave Mixer with a max input power of 20 dBm, operating from -40 to 85°C. It features image rejection type with 50 ohm impedance, conversion loss of 9.5 dB, and operates b/w 8.5-13.5 GHz. Ideal for applications requiring high-frequency mixing in various electronic systems.
HMC260ALC3B
Analog Devices' HMC260ALC3B is a RF/Microwave Mixer with 27 dBm CW input power, 12 dB conversion loss, and 10-26 GHz frequency range. Ideal for applications requiring double balanced mixers in GaAs technology, such as wireless communication systems and radar equipment.
HMC171C8TR
DOUBLE BALANCED; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
HMC1058
Analog Devices' HMC1058 is an RF/Microwave Mixer with 5 dBm CW input power, 11 dB conversion loss, and 50 ohm impedance. It operates from -55°C to 85°C, suitable for image rejection applications in the frequency range of 71-86 GHz.
SYM-30DHW+
Mini-circuits
SYM-30DHW+ by Mini-circuits is a RF/Microwave Mixer with a max input power of 23 dBm and a max voltage standing wave ratio of 1.67. It is commonly used in applications such as component construction, with a max conversion loss of 9.1 dB and an operating frequency range from 5 MHz to 3000 MHz.
HMC615LP4TR
Analog Devices' HMC615LP4TR is a GAAS technology RF mixer with 24 terminals, operating from -40 to 85 °C. It requires a 5V power supply, drawing a max of 75mA. This double balanced mixer is ideal for RF/microwave applications due to its surface mount package and plastic/epoxy body material.
TFF1013HN/N1,115
TFF1013HN/N1,115 by NXP Semiconductors is an RF/microwave mixer designed for surface mount applications. It operates b/w -40 °C and 85 °C with a 5V power supply and features 16 terminals. Ideal for communication systems, it ensures reliable performance in various environments.
HMC665LP4ETR
Analog Devices' HMC665LP4ETR is a GAAS technology RF/Microwave Mixer with 24 terminals, operating from -40 to 85 °C. It requires a 5V power supply and draws a max current of 200mA. This double balanced mixer in a surface mount package is ideal for various RF and microwave applications.
ADE-1L+
ADE-1L+ by Mini-circuits is a RF/Microwave Mixer with 50 ohm impedance, 8 dB conversion loss, and 500 MHz max frequency. It is a double balanced component suitable for surface mount applications in temperatures ranging from -40 to 85 °C.
HMC528LC4
Analog Devices' HMC528LC4 is an RF/Microwave Mixer with 20 dBm CW input power, 85°C max temp, and 50 ohm impedance. Ideal for image rejection applications from 11-16 GHz range due to its low 12 dB conversion loss and gold terminal finish.
HMC615LP4ETR
Analog Devices' HMC615LP4ETR is a GAAS RF/Microwave Mixer with 24 terminals, operating from -40 to 85 °C. It requires a 5V power supply, draws max 75mA current, and features double balanced technology. Ideal for surface mount applications in various RF and microwave systems.
HMC266
Analog Devices' HMC266 is a RF/Microwave Mixer with 50 ohm impedance, triple balanced design, and 16 dB max conversion loss. It operates from -55°C to 85°C, handling input power up to 13 dBm. Ideal for applications requiring frequency mixing in the range of 20-40 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
HMC213BMS8ETR
HMC213BMS8ETR by Analog Devices is a RF/Microwave Mixer with 50 ohm impedance, operating frequency range of 1.5-4.5 GHz, and max conversion loss of 11 dB. It can handle up to 13 dBm input power and operates in temperatures from -40°C to 85°C. Ideal for applications requiring double balanced mixers in RF systems.
HMC292ALC3B
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Minimum Operating Frequency: 14000 MHz; Maximum Input Power (CW): 18 dBm;
HMC219BMS8GETR
DOUBLE BALANCED; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Maximum Conversion Loss: 11 dB; JESD-609 Code: e3; Construction: COMPONENT;
HMC213BMS8E
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Maximum Conversion Loss: 11 dB; Terminal Finish: MATTE TIN; Maximum Operating Frequency: 4500 MHz;
HMC207AS8ETR
Hittite Microwave
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Temperature: -40 Cel;
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: SOP8,.25;
HMC213BMS8GE
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Conversion Loss: 10 dB;
HMC213BMS8GETR
DOUBLE BALANCED;
HMC220AMS8ETR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
HMC292ALC3BTR
DOUBLE BALANCED; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 14000 MHz; Maximum Operating Frequency: 30000 MHz; Characteristic Impedance: 50 ohm;
HMC292ALC3BTR-R5
DOUBLE BALANCED; Minimum Operating Temperature: -40 Cel; Construction: COMPONENT; Minimum Operating Frequency: 14000 MHz; Maximum Conversion Loss: 12.5 dB; Maximum Operating Temperature: 85 Cel;
HMC208AMS8E
DOUBLE BALANCED; Characteristic Impedance: 50 ohm; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 13 dBm; Maximum Operating Frequency: 2000 MHz;
HMC208AMS8ETR
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP8,.19;
HMC214MS8
HMC208AMS8TR
HMC214MS8E
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Characteristic Impedance: 50 ohm;
HMC213AMS8
DOUBLE BALANCED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Minimum Operating Frequency: 1500 MHz;
HMC213AMS8E
HMC207AS8TR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved