Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Analog Devices' HMC-C005 is a 50 ohm RF splitter with max input power of 13.01 dBm, operating from 500 MHz to 18 GHz. Constructed coaxially with gold finish, it's ideal for RF/Microwave applications requiring signal splitting/combing in temperatures ranging from -55°C to 85°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Parana Technologies
$0.791
$0.736
IDEA Electronic Components Group
$0.851
$0.808
DigiPath Technology Company
$1.328
$1.274
AZTECH Wire
$16.805
One Stop Electronics
$18.000
Semicontronic
$30.000
$29.250
$29.100
QUARKTWIN TECHNOLOGY LTD
Corphita
The high maximum input power allows this splitter/combiner to handle strong signals without degradation, ensuring reliable performance in various RF/microwave applications.
Coaxial construction provides excellent shielding against interference, resulting in high signal integrity and minimal loss in signal quality.
With a high maximum operating temperature, this splitter/combiner can withstand challenging environmental conditions, making it suitable for a wide range of applications.
The low minimum operating temperature ensures reliable performance even in extreme cold environments, adding to the product's versatility.
The gold terminal finish with nickel barrier provides excellent conductivity and corrosion resistance, ensuring long-term reliability and durability of the product.
Being a splitter, this product can efficiently divide the input signal into multiple output signals, making it ideal for applications that require signal distribution.
The 50 ohm characteristic impedance matches the standard impedance used in RF/microwave systems, ensuring optimal signal transfer and compatibility with other components.
The low minimum operating frequency allows this splitter/combiner to work effectively with a wide range of RF and microwave signals, making it versatile for various applications.
With a high maximum operating frequency, this product can handle a wide range of RF and microwave signals, making it suitable for high-frequency applications.
RF/Microwave Splitter/Combiners HMC-C005 attributes and parameters. Explore more RF/Microwave Splitter/Combiners devices from Analog Devices
Additional Features:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
HMC-C005 RF & Microwave trade compliance attributes, and parameters.
ECCN
3A001.A.11
ECCN Governance
EAR
HTS
8543.70.99.60
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
LAN8720A-CP-TR
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
SPC TECHNOLOGY/ MULTICOMP
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
6014-3
Cobham Plc
Cobham Plc's 6014-3 RF/Microwave Splitter/Combiner has a max input power of 30 dBm, VSWR of 1.2, and operates from -65°C to 125°C. With a frequency range of 0-6000 MHz and impedance of 50 ohm, it is ideal for signal splitting in various RF/microwave applications.
SCA-4-10+
Mini-circuits
Mini-circuits SCA-4-10+ is an RF/Microwave Combiner with 26.99 dBm CW power, 1.38 VSWR, and 2.5 dB insertion loss. Ideal for combining signals in the frequency range of 5-1000 MHz, it operates b/w -40 to 85°C making it suitable for various RF applications.
ZX10R-14-S+
ZX10R-14-S+ by Mini-circuits is a RF/Microwave Combiner with max input power of 22.04 dBm and VSWR of 1.26. It operates from -40 to 85°C, has max insertion loss of 1.8 dB, and covers frequencies from 0-10000 MHz. Ideal for RF signal combining applications.
HMC-C005
Analog Devices
ADA4304-3ACPZ-R2
ADA4304-3ACPZ-R2 by Analog Devices is a 16-terminal RF splitter with characteristic impedance of 75 ohm. It operates from -40 to 85 °C, suitable for frequencies ranging from 54 MHz to 865 MHz. The device has a max supply current of 105 mA and is designed for surface mount applications in RF/Microwave systems.
1870
1870 by Cobham Plc is a RF/Microwave Splitter with max input power of 30 dBm, VSWR of 1.3, and insertion loss of 7.5 dB. It operates b/w 0-18000 MHz, ideal for splitting RF signals in applications requiring high power handling and low signal loss.
DS-112
Tyco Electronics M/a-com
SPLITTER; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 30 dBm; Maximum Operating Frequency: 500 MHz; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm;
TCP-2-33W+
Mini-circuits TCP-2-33W+ is a RF/Microwave splitter/combiner with max input power of 26.99 dBm, VSWR of 2.9, and max insertion loss of 2.1 dB. Ideal for applications requiring a device with characteristic impedance of 50 ohm, operating frequency range from 50 MHz to 3 GHz, and temperature tolerance b/w -40°C to 85°C.
GP2Y+
The Mini-circuits GP2Y+ is a RF/Microwave Splitter/Combiner with max input power of 31.76 dBm and VSWR of 1.2. Featuring 12 terminals, it operates from -40 to 85°C, with insertion loss of 1.5 dB. Ideal for applications requiring high isolation and frequency range from 1600-3300 MHz in surface mount setups.
SCPJ-2-9
Mini-circuits SCPJ-2-9 is an RF/Microwave Combiner with 8 terminals, 50 ohm impedance, and 1.8 dB insertion loss. It operates from 200 MHz to 900 MHz, handles up to 30 dBm CW power, and has a VSWR of 1.42. Ideal for surface mount applications in temperature range -40°C to +85°C.
ADA4302-4ACPZ-RL71
SPLITTER;
TCP-2-33W
Mini-circuits TCP-2-33W RF combiner has max input power of 26.99 dBm, VSWR of 2.9, and max insertion loss of 2.1 dB. Ideal for combining RF signals in applications requiring a characteristic impedance of 50 ohms within the frequency range of 50 MHz to 3 GHz.
CX4002LNLT
Pulse Electronics
CX4002LNLT by Pulse Electronics is a RF/Microwave Splitter with 6 terminals, 75 ohm impedance, and 17 dB isolation. It operates b/w 5-1000 MHz with a max insertion loss of 3 dB. Ideal for applications requiring high-frequency signal splitting in components.
SCP-4-4
The Mini-circuits SCP-4-4 is an RF/Microwave Combiner with max input power of 30 dBm, VSWR of 1.61, and insertion loss of 1.5 dB. Ideal for combining signals in the frequency range of 800-1000 MHz, it operates b/w -40 to 85°C making it suitable for various communication applications.
ADP-2-1W
Mini-circuits ADP-2-1W is a RF/Microwave splitter/combiner with 33.01 dBm CW power, 1.26 VSWR, and 1 dB insertion loss. Ideal for applications requiring high isolation (20 dB), it operates from 1 MHz to 650 MHz with a characteristic impedance of 50 ohms.
ZFSC-2-372-S+
Mini-circuits ZFSC-2-372-S+ is a RF/Microwave splitter/combiner with max input power of 44.77 dBm, VSWR of 1.99, and max insertion loss of 1.6 dB. Ideal for applications requiring a device type that operates b/w 10 MHz to 3700 MHz with characteristic impedance of 50 ohm in coaxial construction.
EP2K1+
EP2K1+ by Mini-circuits is a RF/Microwave Splitter/Combiner with 24 terminals. It has a max input power of 33.98 dBm, VSWR of 1.5, and insertion loss of 3.2 dB. Ideal for applications requiring high-frequency signal splitting and combining in components with GAAS technology, operating b/w 2000-26500 MHz range.
QCN-19
Mini-circuits QCN-19 is a RF/Microwave Combiner with 6 terminals, 50 ohm impedance, and 1.2 VSWR. It operates from 1100 MHz to 1925 MHz, with max insertion loss of 0.9 dB and min isolation of 19 dB. Ideal for surface mount applications in high-power environments up to 41.76 dBm.
ADA4303-2ACPZ-RL
ADA4303-2ACPZ-RL by Analog Devices is a 75 ohm RF splitter with 12 terminals, operating from 0 to 1700 MHz. It has a max supply current of 90 mA and can withstand temperatures from -40 to 85°C. Ideal for RF/Microwave applications requiring surface mount components.
MAX9987EGP
Maxim Integrated
SPLITTER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 20; Package Body Material: PLASTIC/EPOXY; Technology: BICMOS; Terminal Finish: Tin/Lead (Sn/Pb);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
HMC-C006
SPLITTER; JESD-609 Code: e4; Additional Features: SMA-F; Construction: COAXIAL; Minimum Operating Temperature: -55 Cel; Maximum Operating Frequency: 18000 MHz;
HMC-C007
SPLITTER; Minimum Operating Frequency: 500 MHz; Maximum Input Power (CW): 13.01 dBm; Characteristic Impedance: 50 ohm; Construction: COAXIAL; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
Hittite Microwave
SPLITTER; Construction: COAXIAL; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Maximum Operating Frequency: 18000 MHz; Maximum Operating Temperature: 85 Cel;
SPLITTER; Minimum Operating Temperature: -55 Cel; Maximum Input Power (CW): 41.14 dBm; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm; Additional Features: SMA-F;
SPLITTER; Characteristic Impedance: 50 ohm; Construction: COAXIAL; Additional Features: SMA-F; Maximum Input Power (CW): 13.01 dBm; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved