Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADM3050EBRWZ-RL by Analog Devices is a Network Interface with 16 terminals, operating from -40 to 125°C. It features Gull Wing terminals, Matte Tin finish, and is Automotive grade. Ideal for MIL-STD-1553 data bus transceiver applications in automotive electronics.
Median Price
$6.970
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$6.394
100+ parts
$4.786
1k+ parts
$3.632
10k+ parts
-
Mouser Electronics
$4.490
$4.240
Newark
$7.460
$4.800
$4.440
Analog Devices Inc
$7.730
$5.047
$4.564
$4.470
DigiKey
$4.911
Element14
$9.790
$6.370
$6.240
Verical
$3.270
Rochester
$3.640
$3.260
$3.060
Arrow
$3.418
$3.305
IBS Electronics
$1.655
Nova Conductors
$3.900
Digiode
$5.938
Chip Stock
Vyrian
VNN
Vigor
$3.470
Aranea Global
$3.822
$3.669
Argo Parts USA
Corphita
$5.625
Semicontronic
$6.050
$5.899
$5.868
Parana Technologies
$6.105
$5.678
Ampacity Inc.
$6.320
IDEA Electronic Components Group
$6.565
$6.237
Aztec Data Supply Inc.
$9.040
DigiPath Technology Company
$10.241
$9.832
Advanced Electronics
$11.803
$11.213
Corohmni
$13.535
Microchip USA
$18.368
Lixinc
Continental Prestige Electronics
$4.120
$3.130
Futuretech Components
The plastic/epoxy material used for the package body ensures durability and reliability of the network interface in various environmental conditions.
Being surface mountable makes installation of the network interface quick and easy, saving time and effort during setup.
With 16 terminals, this network interface can handle a diverse range of connections and data transfer requirements efficiently.
The high maximum operating temperature of 125°C ensures the network interface can perform reliably even under high-demand and extreme temperature conditions.
The 5V nominal supply voltage allows for compatibility with standard power sources, making integration into existing systems seamless.
Network Interfaces ADM3050EBRWZ-RL attributes and parameters. Explore more Network Interfaces devices from Analog Devices
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
ADM3050EBRWZ-RL Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Synsemi
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TJA1050T/H/V,112
TJA1050T/H/V,112 by NXP Semiconductors is a network interface IC with 8 terminals and a supply voltage of 5V. It operates at temperatures ranging from -40 to 125°C and has a data rate of 1 Mbps. This IC is commonly used in automotive applications for interface circuits.
KSZ8081RNBCA-TR
Microchip's KSZ8081RNBCA-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at temperatures from 0 to 70°C. It features a square chip carrier package style with matte tin finish, suitable for network interfaces in commercial-grade telecom applications.
MCP2542FDT-E/MF
MCP2542FDT-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 125°C. It has 8 terminals in a small outline package suitable for automotive applications. The device supports a nominal voltage of 5V and consumes up to 140mA during operation.
SN65HVD231QDG4
Texas Instruments
SN65HVD231QDG4 by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for automotive applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 125°C. Ideal for network interfaces requiring low supply current and high reliability.
KSZ8895MQXCA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
TCAN332DR
TCAN332DR by Texas Instruments is a network interface IC with 1 channel and a data rate of 1 Mbps. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is commonly used in automotive applications.
TLK110PT
TLK110PT by Texas Instruments is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a 48-terminal quad package style, suitable for network interfaces in industrial applications. The IC has a nominal voltage of 3.3V and terminal pitch of 0.5mm, making it ideal for surface mount assembly.
DP83826ERHBR
DP83826ERHBR by Texas Instruments is an Ethernet transceiver with a data rate of 100Gbps. It operates at industrial temperature grades (-40 to 105°C) and has a supply voltage of 3.3V. The package style is chip carrier, suitable for network interfaces in various applications.
KSZ8041RNLI-TR
KSZ8041RNLI-TR by Microchip: Ethernet transceiver IC with 100 Mbps data rate, operates at -40 to 85°C. Features 32 terminals in a square chip carrier package style. Ideal for network interfaces in industrial applications.
MCP2561T-E/SN
MCP2561T-E/SN by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply, -40 to 125°C temp range. Small outline package with 8 terminals and matte tin finish.
RTL8211F-CG
Realtek Semiconductor
Realtek RTL8211F-CG is a 40-terminal Ethernet transceiver with a square package shape. Operating b/w 0-70°C, it has a low profile of 0.9mm and terminal pitch of 0.4mm. Ideal for network interfaces in commercial-grade telecom applications.
MAX33041EASA+T
Maxim Integrated
CAN TRANSCEIVER; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
KSZ8851-32MQLI
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
TCAN1051HVDRBTQ1
TCAN1051HVDRBTQ1 by Texas Instruments is a network interface IC with AEC-Q100 screening. It operates b/w -55 to 125°C, has a data rate of 2 Mbps, and supports a supply voltage of 5V. Ideal for automotive applications due to its MILITARY temperature grade and small outline package style.
KSZ8721CL
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
KSZ8041TLI-S
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
TJA1050T/N1
NXP Semiconductors' TJA1050T/N1 is a network interface IC with 8 terminals, operating at 5V. It features a data rate of 1 Mbps and is designed for automotive applications. With a temperature range from -40 to 125°C, this CMOS technology-based chip offers low supply current at 0.075 mA.
TJA1057T,118
NXP Semiconductors' TJA1057T,118 is a network interface IC with 8 terminals and AEC-Q100 screening. It operates at 5V nominal voltage, drawing a max of 70mA current. This small outline package IC is ideal for automotive interface circuit applications.
SN65HVD102RGBT
SN65HVD102RGBT by Texas Instruments is a network interface chip with 20 terminals, operating temperature range of -40 to 105°C, and support for 24V supply voltage. It is designed for industrial applications requiring low power consumption (2mA) and features a compact rectangular package suitable for surface mounting. The chip carrier design with nickel/palladium/gold finish makes it ideal for telecom circuits in harsh environments.
TLE9252VSKXUMA1
Infineon Technologies
TLE9252VSKXUMA1 by Infineon is a CAN FD transceiver with 5 Mbps data rate, AEC-Q100 screening, and 5V supply voltage. Ideal for automotive applications due to its small outline package and operating temperature range of -40 to 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
Analog Devices
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADM3053BRWZ
ADM3053BRWZ by Analog Devices is a network interface with 20 terminals, operating at -40 to 85°C. It has a supply voltage of 5V, data rate of 1 Mbps, and terminal pitch of 1.27mm. Ideal for industrial applications requiring reliable interface circuits in compact spaces.
ADM3053BRWZ-REEL7
ADM3053BRWZ-REEL7 by Analog Devices is a Network Interface with 20 terminals, operating at -40 to 85°C. It has a supply voltage of 5V and data rate of 1 Mbps, suitable for industrial telecom applications. The package is small outline, rectangular in shape, with matte tin finish and Gull Wing terminal form.
ADM3054BRWZ
ADM3054BRWZ by Analog Devices is a 16-terminal Ethernet transceiver with a data rate of 1 Mbps. Operating at -40 to 125°C, it has a supply voltage of 3.3V and consumes 0.075 mA max current. Ideal for automotive applications due to its DMOS technology and small outline package style.
ADM3054BRWZ-RL7
ADM3054BRWZ-RL7 by Analog Devices is a network interface with 16 terminals, operating at -40 to 125°C. It has a supply voltage of 3.3V, data rate of 1 Mbps, and is an Ethernet transceiver for automotive applications. The package is small outline, surface mountable, with a rectangular shape and Gull Wing terminals.
ADM3057EBRWZ-RL
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
ADM3055EBRIZ-RL
ADM3055EBRIZ-RL by Analog Devices is a network interface IC with 20 terminals, operating b/w -40 to 105°C. It has a supply current of 260mA at 5V and Gull Wing terminal form. Ideal for industrial applications requiring Interface Circuit Telecom ICs in compact SMD packages.
ADM3055EBRIZ
ADM3055EBRIZ by Analog Devices is a network interface IC with 20 terminals, operating from -40 to 105°C. It has a supply current of 260mA at 5V and is ideal for industrial telecom applications requiring a small outline package with gull wing terminals. The IC's peak reflow temperature is 260°C, making it suitable for surface mount PCBs in harsh environments.
ADM3057EBRWZ
ADM3057EBRWZ by Analog Devices is a network interface IC with 20 terminals, operating from -40 to 105°C. It features a small outline package style, Gull Wing terminal form, and 5V supply voltage. Ideal for industrial applications requiring interface circuitry in compact spaces.
ADM3052BRWZ
ADM3052BRWZ by Analog Devices is a network interface IC with 1 transceiver. It operates at a data rate of 1 Mbps and has a nominal voltage of 3.3V. This small outline package is suitable for industrial applications.
ADM3058EBRIZ-RL
ADM3058EBRIZ-RL by Analog Devices is a CAN FD transceiver with 12 Mbps data rate, operating at -40 to 125°C. It features Gull Wing terminals, 5V supply voltage, and small outline package suitable for automotive applications.
ADM3050EBRIZ-RL
ADM3050EBRIZ-RL by Analog Devices is a Network Interface with 8 terminals, operating from -40 to 125°C. It features a small outline package style, Gull Wing terminal form, and supports MIL-STD-1553 data bus transceiver applications in automotive environments.
ADM3058EBRIZ
ADM3058EBRIZ by Analog Devices is a CAN FD transceiver with 12 Mbps data rate. Operating temperature range from -40 to 125 °C, suitable for automotive applications. Package style is small outline, surface mountable with 8 terminals in gull wing form.
ADM3050EBRIZ
ADM3050EBRIZ by Analog Devices is a Network Interface with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminal form, and 5V nominal voltage. Ideal for automotive applications requiring MIL-STD-1553 data bus transceiver functionality.
ADM3050EBRWZ
ADM3050EBRWZ by Analog Devices is a 16-terminal network interface with a small outline package style. Operating b/w -40 to 125°C, it's an automotive-grade IC ideal for MIL-STD-1553 data bus transceiver applications. With matte tin finish and gull wing terminal form, it has a nominal voltage of 5V.
ADM3050ETRWZ-EP-RL
INTERFACE CIRCUIT; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ADM3050ETRWZ-EP
ADM3056EBRIZ
ADM3056EBRIZ by Analog Devices is a network interface IC with 20 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminals, and is suitable for automotive applications requiring a 5V supply voltage.
ADM3054WBRWZ-RL7
ETHERNET TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ADM3057ETRWZ-EP
ADM3057ETRWZ-EP by Analog Devices is a network interface IC with 20 terminals, operating b/w -55 to 105°C. It features a small outline package style, matte tin finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and interface circuit functionality.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved