Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADGS1209BCPZ by Analog Devices is a CMOS differential multiplexer with 2 functions, 4 channels, and 24 terminals. It operates in automotive-grade temperatures (-40 to 125 °C) and has a max on-state resistance of 200 ohm. Ideal for applications requiring high isolation (85 dB) and fast switching times (155 ns).
Median Price
$8.169
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$1.417
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$7.240
Verical
Mouser Electronics
$13.560
$8.920
$8.550
Analog Devices Inc
$14.800
$5.970
DigiKey
$10.128
$9.387
$9.187
Rochester
$7.460
$6.670
$6.280
Digiode
$1.752
Vyrian
Semicontronic
$1.570
$1.531
$1.523
Ampacity Inc.
Corphita
$1.660
Parana Technologies
$4.324
$4.021
IDEA Electronic Components Group
$4.649
$4.417
Native Components
$5.834
DigiPath Technology Company
$7.252
$6.962
QUARKTWIN TECHNOLOGY LTD
Northwest PG Solutions
$5.717
This product can be easily mounted on a PCB surface, making it convenient for manufacturing and assembly processes.
With 2 functions, this multiplexer offers versatility and flexibility in routing signals or data to different channels.
The square package shape provides a compact design and efficient use of space on a circuit board.
Operating at a nominal supply voltage of 15V, this product ensures stable performance within the specified voltage range.
Having 24 terminals allows for connecting multiple inputs and outputs, increasing connectivity options.
With a high maximum operating temperature, this product can withstand elevated temperature environments, increasing its durability and reliability.
The ability to operate at low temperatures down to -40°C makes this multiplexer suitable for a wide range of environmental conditions.
Low on-state resistance ensures minimal signal loss and efficient switching performance.
CMOS technology offers low power consumption and high noise immunity, making it an energy-efficient and reliable choice for digital integrated circuits.
Multiplexers & Switches ADGS1209BCPZ attributes and parameters. Explore more Multiplexers & Switches devices from Analog Devices
Additional Features:
Other IC type:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
ADGS1209BCPZ Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semitronics
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vishay Intertechnology
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS84PH6327XTSA2
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
ADG819BRMZ
Analog Devices
ADG819BRMZ by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 1.4 ohm and nominal off-state isolation of 71 dB. This CMOS technology-based switch operates at a temperature range from -40 to 125 °C, making it suitable for automotive applications requiring fast switching times and low resistance.
PCA9546APW,118
NXP Semiconductors
PCA9546APW,118 by NXP Semiconductors is a 4-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It operates in industrial temperature grades (-40°C to 85°C) and has separate outputs with a max switch-on/off time of 0.3 ns, making it ideal for applications requiring precise signal routing in compact spaces.
FSA221L10X
Fairchild Semiconductor
DPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG419BRMZ
ADG419BRMZ by Analog Devices is a CMOS SPDT switch with 8 terminals and a max on-state resistance of 35 ohm. It operates at temperatures ranging from -40 to 85 °C and has a nominal voltage of +-15 V. This industrial-grade switch is ideal for applications requiring precise signal routing in compact electronic systems.
74HC4051BQ,115
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LV4052APWT
Texas Instruments
SN74LV4052APWT by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at industrial temperature grade. It has a max supply voltage of 5.5V and nominal bandwidth of 50kHz, making it suitable for applications requiring high-speed signal switching in compact designs. With a small outline package style and low on-state resistance, this device offers efficient performance in various electronic systems.
MC14051BDR2G
MC14051BDR2G by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 3-18V and offers a max on-state resistance of 1050 ohm. This small outline IC, suitable for military applications, has a temperature range from -55 to 125°C and features break-before-make switching technology.
ADG715BRUZ
ADG715BRUZ by Analog Devices is an 8-channel multiplexer with a supply voltage range of 2.25V to 2.75V, suitable for industrial applications. It features a max on-state resistance of 4.5 ohm and switching time as low as 190 ns, making it ideal for high-speed signal routing in compact designs. With a small outline package and dual terminal position, this CMOS technology-based switch offers reliable performance in temperature ranges from -40°C to 85°C.
ADG1409YRUZ
ADG1409YRUZ by Analog Devices is a 4-channel CMOS differential multiplexer with a max on-state resistance of 9 ohm and switching voltage of +-15/+12/+-5 V. It is designed for automotive applications, featuring a small outline package with dual terminals and matte tin finish, suitable for surface mount assembly.
SN74HC4066DR
SN74HC4066DR by Texas Instruments is a CMOS SPST switch with 4 channels, 150 ohm Ron, and 30 kHz bandwidth. It operates b/w -40 to 85 °C and has a max supply current of 0.04 mA. Ideal for industrial applications requiring fast switching and low power consumption.
AD7512DITQ
AD7512DITQ by Analog Devices is a CMOS SPDT multiplexer with 2 functions, 14 terminals, and +-15V power supplies. It operates in temperatures ranging from -55 to 125 °C and is ideal for military applications requiring high on-state resistance match of 0.75 ohm.
77052012C
Analog Devices 77052012C is a CMOS single-ended multiplexer with 8 channels, on-state resistance of 450 ohm, and switching type of break-before-make. It operates at temperatures ranging from -55 to 125 °C and has a supply current of 1.5 mA. Ideal for military applications requiring high reliability in harsh environments.
7705201EA
Temic Semiconductors
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: NO; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
TPS2052CDGNR
TPS2052CDGNR by Texas Instruments is a small outline switch with common output, suitable for industrial applications. With a max operating temperature of 125°C and min of -40°C, it offers SPST type switching at 260°C peak reflow temperature. Its compact design features a terminal pitch of 0.65mm and dual terminal position for versatile usage.
ADG5412BRUZ-REEL7
ADG5412BRUZ-REEL7 by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and on-state resistance of 11 ohm. It operates in automotive grade at -40 to 125 °C and has a supply voltage range of +-9/+-22/9/40 V. Ideal for applications requiring fast switching with separate outputs in compact designs.
SN74LV4051APWR
SN74LV4051APWR by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals, operating at a supply voltage range of 2-5.5V. It offers a max on-state resistance of 225 ohm and nominal bandwidth of 35 kHz, making it ideal for industrial applications requiring precise signal switching in compact spaces.
DG408DY
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE;
TPS2052CDGN
TPS2052CDGN by Texas Instruments is a SPST switch with 8 terminals, operating at -40 to 85°C. It has a max on-state resistance of 0.095 ohm and can handle supply voltages from 4.5V to 5.5V. Ideal for industrial applications requiring common output switching with low power consumption.
74HC4051D-T
Philips Semiconductors
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TS5A3159DBVT
TS5A3159DBVT by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a low on-state resistance of 3.2 ohm and fast switching times of 95 ns on and 70 ns off. Ideal for industrial applications requiring high isolation (63 dB) and low power consumption (0.0001 mA).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADGS1208BCPZ
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
ADGS1414DBCCZ-RL7
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 30; Package Code: HQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
ADGS1414DBCCZ
ADGS1208BCPZ-RL7
ADGS1412BCPZ-RL7
ADGS1412BCPZ-RL7 by Analog Devices is a CMOS SPDT multiplexer with 4 functions, operating at -40 to 125°C. It features a low on-state resistance of 4 ohm and supports supply voltages from -16.5V to 16.5V, making it ideal for automotive applications requiring precise signal switching in compact spaces.
ADGS1408BCPZ
ADGS1408BCPZ-RL7
ADGS1412BCPZ
SPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
ADGS1612BCPZ-RL7
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
ADGS1612BCPZ
ADGS1612BCPZ by Analog Devices is a 4-function multiplexer with 24 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 1.2 ohm and switch-on time of 485 ns. Ideal for automotive applications due to its low profile and high isolation capabilities.
ADGS5412BCPZ
ADGS1409BCPZ
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
ADGS5414BCPZ
ADGS5412BCPZ-RL7
ADGS1209BCPZ-RL7
ADGS1212BCPZ
ADGS1409BCPZ-RL7
ADGS5414BCPZ-RL7
ADGS1212BCPZ-RL7
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved