Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADG1211YRUZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 120 ohm Ron, and 125 ns switch-on time. It operates in automotive-grade temperatures and is ideal for applications requiring separate output voltages in a compact design.
Median Price
$6.570
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$6.530
100+ parts
$4.220
1k+ parts
$3.830
10k+ parts
$3.740
DigiKey
$6.610
$4.275
$3.855
-
Analog Devices Inc
$7.800
$3.781
$2.700
$3.275
Verical
$3.296
Nova Conductors
$3.930
Digiode
$7.410
Vyrian
VNN
Chip Stock
Vigor
$2.990
Ampacity Inc.
$3.180
Semicontronic
$3.100
$3.085
Corohmni
Continental Prestige Electronics
$3.851
Netroflash
Argo Parts USA
Aztec Data Supply Inc.
$6.283
Corphita
$7.020
AZTECH Wire
$14.950
Parana Technologies
$17.194
$15.990
IDEA Electronic Components Group
$18.488
$17.564
DigiPath Technology Company
$28.841
$27.688
Microchip USA
QUARKTWIN TECHNOLOGY LTD
The plastic/epoxy package body material is durable and ensures the component is well-protected, making it a reliable choice for various applications.
The surface mount capability allows for easy and convenient installation on PCBs, saving space and making it suitable for compact designs.
With 4 functions in one component, this product offers versatility and flexibility in switching and multiplexing applications.
Operating at a nominal supply voltage of 15V ensures compatibility with a wide range of systems and power sources.
The high maximum operating temperature of 125°C allows for reliable performance in harsh environments or under heavy loads.
CMOS technology offers low power consumption, high speed, and noise immunity, making this product energy-efficient and reliable in signal processing.
Multiplexers & Switches ADG1211YRUZ-REEL attributes and parameters. Explore more Multiplexers & Switches devices from Analog Devices
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
ADG1211YRUZ-REEL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Formosa Microsemi
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
FDLL4148
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
74HC4052D
Nexperia
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
77052012X
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
CD4052BM96E4
CD4052BM96E4 by Texas Instruments is a CMOS differential multiplexer with 4 channels, 1050 ohm Ron, and 25 kHz bandwidth. It operates at -55 to 125 °C, has a 1.75 mm height, and is MILITARY grade suitable for signal switching applications requiring high isolation and low on-state resistance.
Vishay Siliconix
77052012A
Intersil
DG412DY
Renesas Electronics
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS2066CDGN-2
TPS2066CDGN-2 by Texas Instruments is a small outline, heat sink package with separate output. Operating from -40 to 125°C, it features SPST type with make-before-break switching for industrial applications. With a terminal pitch of 0.65mm and moisture sensitivity level of 2, it offers dual terminal position and nickel palladium gold silver finish.
FSA2567UMX
FSA2567UMX by Onsemi is a 16-terminal multiplexer with a supply voltage range of 1.65V to 4.3V, offering separate outputs and low on-state resistance of 12 ohm. With a compact chip carrier package style and industrial temperature grade, it is ideal for applications requiring fast switching times and high isolation levels in electronic circuits.
ADV3201ASWZ
Analog Devices
ADV3201ASWZ by Analog Devices is a 32-channel cross point switch with 3.3V nominal voltage, -40 to 85°C operating temperature range, and 90dB off-state isolation. It comes in a square plastic/epoxy package with 176 terminals for industrial applications requiring separate outputs and low profile design.
NCP45524IMNTWG-H
NCP45524IMNTWG-H by Onsemi is an 8-terminal SPST switch with a max on-state resistance of 0.0317 ohm and operates at a nominal voltage of 3.3V. This small outline, heat sink package is ideal for industrial applications requiring low power consumption and precise switching capabilities.
MAX4547EEE
Maxim Integrated
MAX4547EEE by Maxim Integrated is a dual-function audio/video switch with 16 terminals. It operates at a supply voltage range of 2.7V to 6V and offers an on-state resistance of 20 ohms. With a package style of small outline, shrink pitch, it is ideal for industrial applications requiring high isolation and fast switching times.
SN74LV4052APWT
SN74LV4052APWT by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at industrial temperature grade. It has a max supply voltage of 5.5V and nominal bandwidth of 50kHz, making it suitable for applications requiring high-speed signal switching in compact designs. With a small outline package style and low on-state resistance, this device offers efficient performance in various electronic systems.
CD4051BM
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
HEF4051BP
NXP Semiconductors
HEF4051BP by NXP Semiconductors is an 8-channel single-ended multiplexer with a max on-state resistance of 2500 ohm. Operating at a nominal voltage of 5 V, it features a switching time of 280 ns and offers a nominal off-state isolation of 50 dB. Ideal for automotive applications due to its temperature grade and low supply current requirements.
CD74HC4053PWRG4
CD74HC4053PWRG4 by Texas Instruments is a CMOS technology-based multiplexer with 3 channels, offering a max bandwidth of 180 kHz. It operates within a temperature range of -55 to 125 °C and has a low on-state resistance of 130 ohm. Ideal for applications requiring signal switching in military-grade environments.
PCA9548ABS,118
NXP Semiconductors' PCA9548ABS,118 is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It operates b/w -40°C to 85°C, has separate outputs, and a max seated height of 1mm. Ideal for applications requiring signal routing in compact spaces due to its small form factor and low power consumption.
HEF4051BTT,118
HEF4051BTT,118 by NXP Semiconductors is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 3-15V and offers fast switching times of 80ns on-state and 230ns off-state. This industrial-grade device in a small outline package is ideal for applications requiring precise signal routing in temperature-sensitive environments.
SN74LVC1G3157YZPR
SN74LVC1G3157YZPR by Texas Instruments is a SPDT switch with 1 channel, 30 ohm Ron, and 340 kHz bandwidth. It operates at -40 to 85 °C and has a very thin profile package style. Ideal for industrial applications requiring low on-state resistance and high isolation levels.
Analog Devices 77052012X is a CMOS single-ended multiplexer with 8 channels. It operates b/w -55 to 125 °C and has a max supply voltage of 16.5 V. With a package style of chip carrier, it is ideal for military-grade applications requiring fast switching times and low on-state resistance.
DG212CJ+
Analog Devices' DG212CJ+ is a CMOS SPST multiplexer with 4 functions, operating at -15V to +18V. With 16 terminals and 70dB isolation, it's ideal for commercial applications requiring fast switching times of 500-1000ns in the temperature range of 0-70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADG1419BRMZ
ADG1419BRMZ by Analog Devices is a SPDT multiplexer with 8 terminals, operating at -40 to 125°C. It has a max on-state resistance of 3.2 ohm and switching voltage of +-5/+-15/12 V, making it ideal for automotive applications requiring precise signal routing in compact spaces.
ADG1436YRUZ
ADG1436YRUZ by Analog Devices is a 16-terminal SPDT multiplexer with 2 functions. Operating at -40 to 125 °C, it has a max on-state resistance of 4 ohm and switching voltage of +-5/+12/+-15 V. Ideal for automotive applications requiring fast switching times and high isolation levels.
ADG1636BRUZ
ADG1636BRUZ by Analog Devices is a CMOS SPST switch with 2 functions, 16 terminals, and 1.2 ohm max on-state resistance. It operates at -40 to 125 °C and is ideal for automotive applications requiring separate output switching with a nominal voltage of 5 V.
ADG1412YRUZ
SPST; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1436YRUZ-REEL7
SPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1409YRUZ
ADG1409YRUZ by Analog Devices is a 4-channel CMOS differential multiplexer with a max on-state resistance of 9 ohm and switching voltage of +-15/+12/+-5 V. It is designed for automotive applications, featuring a small outline package with dual terminals and matte tin finish, suitable for surface mount assembly.
ADG1414BRUZ-REEL7
ADG1414BRUZ-REEL7 by Analog Devices is an 8-function multiplexer with a supply voltage range of +-5/+-15/12V. It features a max on-state resistance of 25 ohm, switching at 320ns. Ideal for automotive applications due to its CMOS technology and compact design with dimensions of 7.8mm x 4.4mm x 1.2mm.
ADG1636BRUZ-REEL7
ADG1636BRUZ-REEL7 by Analog Devices is a CMOS SPST switch with 2 functions, 16 terminals, and 1.2 ohm max on-state resistance. It operates at -40 to 125 °C and has a small outline package suitable for automotive applications. With separate outputs and break-before-make switching, it offers high isolation of 70 dB.
ADG1419BRMZ-REEL7
ADG1419BRMZ-REEL7 by Analog Devices is a SPDT multiplexer with 8 terminals, operating voltage of +-5/+-15/12V. It has a max on-state resistance of 3.2 ohm and switching time of 140 ns. Ideal for automotive applications due to its BICMOS technology and small outline package design.
ADG1411YRUZ
ADG1404YRUZ
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1636BRUZ-REEL
ADG1206YCPZ-REEL7
ADG1206YCPZ-REEL7 by Analog Devices is a 32-terminal CMOS multiplexer with 16 channels. It operates at temperatures from -40 to 125 °C and has a max on-state resistance of 200 ohm. Ideal for automotive applications, this chip carrier switch offers a nominal voltage of +-15 V and very thin profile package style.
ADG1412YRUZ-REEL7
ADG1412YRUZ-REEL7 by Analog Devices is a 4-function SPST multiplexer with 16 terminals. It operates at -40 to 125 °C, with a max seated height of 1.2 mm and on-state resistance of 5.4 ohm. Ideal for automotive applications requiring CMOS technology and high isolation levels.
ADG1311YRUZ
ADG1311YRUZ by Analog Devices is a CMOS SPST switch with 4 functions, 200 ohm Ron, and 80 dB isolation. It operates in industrial temperature range (-40 to 105 °C) and has a small outline package suitable for multiplexing applications. With a max supply voltage of +-16.5 V, it offers fast switching times (180 ns on, 60 ns off).
ADG1414BCPZ-REEL7
ADG1414BCPZ-REEL7 by Analog Devices is an 8-function multiplexer & switch with a square package shape. It operates at a nominal voltage of 5V and has a max on-state resistance of 25 ohm. This IC is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
ADG1434YRUZ
ADG1434YRUZ by Analog Devices is a 20-terminal SPDT multiplexer with 4 channels. It operates at -40 to 125 °C and supports supply voltages of +-5, +12, +-15 V. Ideal for automotive applications due to its CMOS technology and compact design.
ADG1408YRUZ
ADG1408YRUZ by Analog Devices is an 8-channel CMOS multiplexer with a max on-state resistance of 9 ohm. It operates at temperatures ranging from -40 to 125 °C and has a peak reflow temperature of 260 C. Ideal for automotive applications due to its small outline, thin profile package style and break-before-make switching technology.
ADG1606BRUZ
ADG1606BRUZ by Analog Devices is a 16-channel CMOS multiplexer with a max on-state resistance of 7.5 ohm and switching voltage of 8 V. Ideal for automotive applications, it operates b/w -40 to 125 °C and has a compact rectangular package design suitable for surface mount assembly.
ADG1409YRUZ-REEL7
ADG1409YRUZ-REEL7 by Analog Devices is a CMOS differential multiplexer with 4 channels. It operates at a supply voltage range of 4.5V to 5.5V and offers a max on-state resistance of 9 ohm. With automotive temperature grade, it is suitable for applications requiring fast switching times in compact designs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved