Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AD9833BRMZ-REEL7 by Analog Devices is a DSP peripheral with a max clock frequency of 25 MHz. It has a small outline, thin profile package style and operates at an industrial temperature grade. This IC is commonly used for numeric controlled oscillators in various applications.
Median Price
$15.190
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Rochester
1+ parts
$5.170
100+ parts
$5.070
1k+ parts
$4.960
10k+ parts
-
Chip1Stop
$11.200
$7.750
$7.340
Verical
$14.578
$9.984
$8.915
Mouser Electronics
$10.330
$9.420
Newark
$16.090
$10.950
$10.290
$10.070
DigiKey
$16.410
$11.261
Analog Devices Inc
$10.277
Arrow
$16.587
$11.008
$10.627
Farnell
$9.637
$8.703
Digiode
$4.912
Schukat
$7.574
$5.395
Nova Conductors
$8.574
Bristol Electronics
$10.800
Chip Stock
Vyrian
Cyclops Electronics Ltd
ComSIT Distribution GmbH
ComSIT USA
VNN
Semi Source
SPM Sales
Prism Electronics
LIBRA Elektronik GmbH
Semtec, LLC
Semicontronic
$4.390
$4.280
$4.258
Ampacity Inc.
Corphita
$4.653
Netroflash
$8.145
$7.974
Vigor
$10.650
Microchip USA
$28.080
$27.910
Advanced Electronics
$30.276
$28.762
Corohmni
$53.238
Aztec Data Supply Inc.
$64.130
Parana Technologies
$68.784
$63.969
IDEA Electronic Components Group
$73.961
$70.263
DigiPath Technology Company
$115.379
$110.764
Resion (Excess)
Perfect Parts
A-Z Elektronik GmbH
Alle Elektronik GmbH
Argo Parts USA
GreenTree Electronics
S.R.D Solutions
Futuretech Components
Lixinc
RC Electronics
$8.970
$8.460
$8.280
iodParts Technologies Inc.
$5.254
$4.670
Authorized Procurement Solutions
Kepictronics
Robosynatics
$5.644
Lucentia Tech
Continental Prestige Electronics
$8.930
$7.490
This material provides durability and protection for the internal components of the DSP Peripherals, ensuring a longer lifespan.
The surface mount feature allows for easy and efficient installation of the DSP Peripherals onto a circuit board, saving time and effort in the assembly process.
With a high maximum supply voltage, this product can handle a wide range of power inputs, making it versatile and compatible with various systems.
The square package shape ensures a compact and space-efficient design, ideal for applications where size and footprint are important factors.
With a low minimum operating temperature, this product can withstand extreme cold environments, making it suitable for a wide range of applications.
The high maximum clock frequency of 25 MHz allows for fast and efficient processing of data, making this product suitable for high-performance applications.
CMOS technology offers low power consumption and high noise immunity, making this product energy-efficient and reliable in operation.
DSP Peripherals AD9833BRMZ-REEL7 attributes and parameters. Explore more DSP Peripherals devices from Analog Devices
Boundary Scan:
Maximum Clock Frequency:
JESD-30 Code:
JESD-609 Code:
Length:
Low Power Mode:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Data Bus Width:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Peripheral IC Type:
AD9833BRMZ-REEL7 Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Zetex Plc
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitronics
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Bkc Semiconductors
Good-ark Electronics
Vishay Telefunken
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Electronics
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
L64017DC
Broadcom
DSP PERIPHERAL, MULTIPLIER ACCUMULATOR/SUMMER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 64; Package Code: DIP; Package Shape: RECTANGULAR;
ADSP-1008AKD
Analog Devices
ADSP-1008AKD by Analog Devices is a DSP Peripheral with 19-bit output data bus width, 5V power supply, and 48 terminals. It is used in applications requiring a multiplier accumulator/summer peripheral IC type, operating at temperatures b/w 0°C to 70°C.
ADSP-3202JG
ADSP-3202JG by Analog Devices is a DSP Peripheral with 32-bit output data bus width, 5V power supply, and 8MHz max clock frequency. Ideal for commercial applications requiring a floating-point processor in a ceramic/metal-sealed co-fired package style.
TMC2208J4C
Trw
DSP PERIPHERAL, MULTIPLIER ACCUMULATOR/SUMMER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 48; Package Shape: RECTANGULAR; JESD-30 Code: R-CDIP-T48;
AD9835BRUZ-REEL7
AD9835BRUZ-REEL7 by Analog Devices is a DSP peripheral with 16 terminals, operating at 50 MHz clock frequency. It has a supply voltage range of 4.25V to 5.25V and can withstand temperatures from -40°C to 85°C. Ideal for industrial applications requiring low power consumption and precise numeric controlled oscillation.
HSP45102SI-40
Intersil
HSP45102SI-40 by Intersil is a DSP peripheral with 28 terminals, operating at -40 to 85°C. It features a 5V supply, CMOS technology, and is ideal for numeric controlled oscillators in industrial applications.
ADSP-3221TG
ADSP-3221TG by Analog Devices is a 32-bit DSP peripheral with 5V supply, 8MHz clock frequency, and military-grade temperature range. Ideal for applications requiring high-speed data processing in harsh environments. Features include a 32-bit output data bus width and ceramic/metal-sealed co-fired package body material.
7210L35J
DSP PERIPHERAL, MULTIPLIER ACCUMULATOR/SUMMER;
ADSP1012KD
Analog Devices' ADSP1012KD is a DSP Peripheral IC with 64 terminals, operating at 5V. It features CMOS technology, Tin/Lead terminal finish, and operates b/w 0-70°C. Ideal for applications requiring high-speed signal processing in commercial-grade environments.
ADSP-3210SG
Analog Devices' ADSP-3210SG is a DSP peripheral with 32-bit output data bus width and 6.67 MHz max clock frequency. Ideal for military applications, it operates b/w -55 to 125 °C with a supply voltage range of 4.5V to 5.5V.
ADSP1016TF
ADSP1016TF by Analog Devices is a 64-terminal DSP peripheral with CMOS technology, operating b/w -55°C to 125°C. It features a 5V supply, MIL-graded for military applications, and comes in a ceramic square package suitable for surface mounting.
TMS34082B-32GC
Texas Instruments
TMS34082B-32GC by Texas Instruments is a DSP Peripheral with 32-bit output data bus width, operating at max 16.7 MHz clock frequency. Ideal for commercial applications requiring high-speed processing and floating-point calculations in a compact square package with 145 terminals.
L64012GC
DSP PERIPHERAL, MULTIPLIER ACCUMULATOR/SUMMER; Temperature Grade: COMMERCIAL; Terminal Form: PIN/PEG; No. of Terminals: 68; Package Code: PGA; Minimum Operating Temperature: 0 Cel;
CY29FCT520CTSOC
CY29FCT520CTSOC by Texas Instruments is a DSP Peripheral with 8-bit Output Data Bus Width, operating at 16.67 MHz clock frequency. It is ideal for industrial applications requiring low power mode and CMOS technology, with a supply voltage range of 4.75V to 5.25V. The package style is small outline, making it suitable for compact designs in various electronic systems.
ADSP1016TD
ADSP1016TD by Analog Devices is a DSP Peripheral IC with 64 terminals, CMOS technology, and 5V supply voltage. It operates in temperatures ranging from -55°C to 125°C, making it suitable for military-grade applications requiring high-performance signal processing capabilities. The package style is in-line rectangular ceramic, with tin/lead terminal finish for through-hole mounting.
L64016GM
DSP PERIPHERAL, MULTIPLIER; Temperature Grade: MILITARY; Terminal Form: PIN/PEG; No. of Terminals: 68; Package Code: PGA; Power Supplies (V): 5;
L64012LCC
DSP PERIPHERAL, MULTIPLIER ACCUMULATOR/SUMMER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 68; Package Code: QCCN; Package Shape: SQUARE;
ADSP-1008ATD
Analog Devices' ADSP-1008ATD is a DSP Peripheral with 5V supply, 19-bit output bus, and MILITARY temp grade. Ideal for applications requiring MULTIPLIER ACCUMULATOR/SUMMER peripheral IC type in CMOS technology. Package: CERAMIC, METAL-SEALED COFIRED, RECTANGULAR shape with 48 terminals.
TMS34082A-40GC
TMS34082A-40GC by Texas Instruments is a DSP Peripheral with 32-bit output data bus width, operating at max 20 MHz clock frequency. Ideal for commercial applications, it features a ceramic/metal-sealed co-fired package body and operates b/w 0 to 70°C temperature range.
TMC2208N4C
Fairchild Semiconductor
Fairchild Semiconductor's TMC2208N4C is a DSP peripheral with 48 terminals, operating at 5V. It has a temperature range of 0-70°C and uses CMOS technology. Ideal for applications requiring a multiplier accumulator/summer in commercial-grade environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD9833BRMZ
AD9833BRMZ by Analog Devices is a DSP peripheral with 10 terminals, operating voltage of 2.3-5.5V, clock frequency up to 25MHz. Ideal for industrial applications requiring low power consumption and precise numeric controlled oscillator functions in a compact square package.
AD9833BRMZ-REEL
AD9833BRMZ-REEL by Analog Devices is a DSP peripheral with max supply voltage of 5.5V, clock frequency of 25MHz, and low power mode. Ideal for industrial applications requiring numeric controlled oscillators in compact form factor with dual terminals and CMOS technology.
AD9834BRUZ-REEL
AD9834BRUZ-REEL by Analog Devices is a DSP peripheral with max clock freq of 50MHz. It operates in industrial temp range (-40 to 105°C) and has low power mode. Ideal for applications requiring numeric controlled oscillators in compact designs.
AD9834BRUZ-REEL7
DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
AD9833BRM-REEL7
AD9833BRM-REEL7 by Analog Devices is a DSP peripheral with max clock freq of 25MHz, operating temp range -40 to 105°C, and low power mode. It's used in industrial applications for numeric controlled oscillation due to its CMOS technology and small outline package style.
AD9834BRUZ
AD9834BRUZ by Analog Devices is a DSP peripheral with 20 terminals, operating voltage range of 2.3-5.5V, clock frequency up to 50MHz. It is used in industrial applications requiring numeric controlled oscillators and CMOS technology for low power consumption.
AD9835BRUZ
DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
AD9833BRM
AD9833BRM by Analog Devices is a DSP peripheral with max supply voltage of 5.5V, clock frequency up to 25MHz, and low power mode. It is used in industrial applications for numeric controlled oscillation due to its CMOS technology and small outline package style.
AD9833SRMZ-EP-RL7
AD9833SRMZ-EP-RL7 by Analog Devices is a DSP peripheral with 10 terminals, operating at 2.3V to 5.5V. It features a clock frequency of up to 25MHz and is ideal for military applications requiring low power consumption and precise numeric controlled oscillator functionality.
AD9833BRM-REEL
AD9833BRM-REEL by Analog Devices is a DSP peripheral with a max clock frequency of 25 MHz. It operates at a supply voltage range of 2.3V to 5.5V and has a small outline, thin profile package style. This IC is commonly used in applications requiring numeric controlled oscillators for industrial purposes.
AD9850BRSZ
AD9850BRSZ by Analog Devices is a DSP peripheral with 28 terminals, operating at 125 MHz max clock frequency. It has a CMOS technology, suitable for industrial applications like numeric controlled oscillators due to its low power mode and wide external data bus width of 8 bits.
AD9833WBRMZ-REEL
DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
AD9850BRSZ-REEL
DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
AD9858BSVZ
AD9858BSVZ by Analog Devices is a DSP peripheral with a max clock frequency of 2000 MHz. It operates at a min supply voltage of 3.135 V and has an industrial temperature grade. This IC is commonly used in applications requiring numeric controlled oscillators for precise frequency control.
AD9835BRUZ-REEL
AD9835BRU-REEL7
AD9834BRU-REEL7
AD9858BSV
DSP PERIPHERAL, NUMERIC CONTROLLED OSCILLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved