Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AD8226ARMZ-R7 by Analog Devices is an instrumentation amplifier with 100uV max input offset voltage, 1.5MHz bandwidth, and 80dB min CMRR. Ideal for automotive applications due to its -40 to 125 °C operating temp range and small outline package style.
Median Price
$3.088
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$3.460
100+ parts
$1.980
1k+ parts
-
10k+ parts
Newark
$3.850
$2.410
$2.140
Arrow
$1.849
Verical
Farnell
$2.835
$2.459
$2.006
Element14
$3.340
$3.180
Nova Conductors
$2.115
Digiode
$3.287
Maritex
$4.425
$2.608
Cyclops Electronics Ltd
Chip Stock
VNN
Vyrian
Dynamic Solutions
Semtec, LLC
ComSIT Distribution GmbH
Connector Distribution Corp
Right Parts Inc.
Semicontronic
$1.610
$1.570
$1.562
Ampacity Inc.
Modulus Dynamics
$1.985
Corohmni
Advanced Electronics
$2.045
$1.942
Argo Parts USA
Netroflash
$2.073
Corphita
$3.114
Vigor
$3.200
Aztec Data Supply Inc.
$3.750
Parana Technologies
$4.497
$4.182
IDEA Electronic Components Group
$4.835
$4.593
DigiPath Technology Company
$7.543
$7.241
Microchip USA
$13.750
$13.660
$13.620
$13.580
GreenTree Electronics
RC Electronics
$2.340
$2.070
Lucentia Tech
$1.945
$1.906
Lixinc
Robosynatics
A-Z Elektronik GmbH
iodParts Technologies Inc.
$2.571
$2.203
Futuretech Components
Continental Prestige Electronics
$2.500
$1.800
Alle Elektronik GmbH
Benley Electronics
Plastic/epoxy package material provides durability and resistance to environmental factors, making the product suitable for a variety of applications.
Low input offset voltage ensures accurate measurement and minimal error in signal processing.
Low bias current helps in maintaining signal integrity and reducing power consumption.
Surface mount design allows for easy integration onto PCBs, saving space and simplifying assembly.
Nominal supply voltage of 15V is suitable for a wide range of applications and provides stable operation.
Having 8 terminals allows for flexible connectivity and easy interfacing with other components.
Low input offset current ensures minimal input errors and high accuracy in signal processing.
Low non-linearity ensures accurate output response and reliable performance in various operating conditions.
High supply voltage limit provides flexibility in power supply options and ensures safe operation within specifications.
Wide operating temperature range of -40 to 125°C allows for operation in harsh environments and industrial applications.
Being an instrumentation amplifier, this product offers high accuracy, high input impedance, and low output impedance for precise signal amplification and measurement.
Instrumentation Amplifiers AD8226ARMZ-R7 attributes and parameters. Explore more Instrumentation Amplifiers devices from Analog Devices
Amplifier Type:
Power Supply:
Total Functions:
Sub-Category:
Nominal Bandwidth (3dB):
Nominal Slew Rate:
Minimum Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Peak Bias Current:
Maximum Supply Current:
Minimum Voltage Gain:
Nominal Voltage Gain:
Maximum Voltage Gain:
Maximum Non Linearity:
Maximum Input Offset Current (IIO):
Nominal Supply Voltage:
Maximum Supply Voltage:
Nominal Negative Supply Voltage (Vsup):
Maximum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Reflow Peak Time Limit:
Peak Reflow Temperature:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
AD8226ARMZ-R7 Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Design/Specification - AD8226 23/Sep/2019 Polyimide Alignment Target 11/Aug/2015
PCN Assembly/Origin - Alt FAB 02/Nov/2023
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
USB2514BI-AEZG
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Vishay Telefunken
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Semiconductor
XINA823DR
Texas Instruments
XINA823DR by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 190uV and max average bias current of 0.01uA. It has a nominal voltage of 15V, making it suitable for precision signal amplification in applications requiring high accuracy and low power consumption. The small outline package with dual terminals and gull wing form factor makes it ideal for compact designs where space is limited.
AD620BRZ-RL
Analog Devices
AD620BRZ-RL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 85uV and max average bias current of 0.0015uA. It operates at a nominal voltage of +-15V, making it ideal for industrial applications requiring precise signal amplification in tight spaces.
LTC6915IDE#PBF
LTC6915IDE#PBF by Analog Devices is an instrumentation amplifier with 10uV max input offset voltage, 0.01uA max average bias current, and 0.003uA max input offset current. It's used in industrial applications for precise signal amplification and noise rejection in a compact package with a small outline and thin profile.
LTC2053HDD#TRPBF
Linear Technology
INSTRUMENTATION AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
LT1101AIN8#PBF
LT1101AIN8#PBF by Analog Devices is an instrumentation amplifier with 350uV max input offset voltage, 0.01uA max average bias current, and 10 min voltage gain. Ideal for industrial applications requiring precise signal amplification in a temperature range of -40 to 85 °C. Package style: IN-LINE, terminals: 8, and bandwidth: 0.037 MHz.
LT1167CS8#TR
LT1167CS8#TR by Analog Devices is an instrumentation amplifier with 80uV max input offset voltage, 0.0006uA max average bias current, and 1MHz nominal bandwidth. Ideal for precision signal conditioning in industrial automation, medical devices, and test equipment due to its high gain and low noise characteristics.
AD8421ARMZ-R7
AD8421ARMZ-R7 by Analog Devices is an instrumentation amplifier with 86uV max input offset voltage, 10MHz bandwidth, and 10000 max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package. With a wide supply voltage range and low power consumption, it suits various electronic systems.
ADA4254ARUZ
ADA4254ARUZ by Analog Devices is an instrumentation amplifier with 14uV max input offset voltage, 0.014uA max average bias current, and 1.8MHz nominal bandwidth. Ideal for industrial applications requiring precise signal amplification in a compact package with a wide temperature range.
PGA204BU
PGA204BU by Texas Instruments is an instrumentation amplifier with 60uV max input offset voltage, 1MHz nominal bandwidth, and 1000 max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package.
INA166UA
INA166UA by Texas Instruments is an instrumentation amplifier with 250uV max input offset voltage, 12uA max average bias current, and 2000 min voltage gain. Ideal for industrial applications, it operates at -40 to 85°C with a bandwidth of 0.45MHz. Suitable for surface mount designs with a compact rectangular package style.
LT1167AIS8-1#TRPBF
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
INA321EA/2K5
INA321EA/2K5 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 500uV and max bias current of 0.00001uA. It operates at a nominal voltage of 5V, suitable for military-grade applications requiring high precision amplification in compact spaces. The small outline package with dual terminals makes it ideal for surface mount designs in harsh environments.
AD623AN
AD623AN by Analog Devices is an instrumentation amplifier with a max input offset voltage of 350uV and max average bias current of 0.0275uA. It operates at a nominal voltage of 5V, has a bandwidth of 0.8MHz, and is ideal for industrial applications requiring precise signal amplification.
XTR105UA/2K5E4
XTR105UA/2K5E4 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 250uV and max average bias current of 0.05uA. It operates at a nominal voltage of 24V, making it suitable for industrial applications requiring precise signal amplification in temperature-sensitive environments. With a compact rectangular package style and surface-mount capability, this amplifier offers high performance in a small footprint.
AD8422BRMZ-R7
AD8422BRMZ-R7 by Analog Devices is an instrumentation amplifier with a max input offset voltage of 75uV and max average bias current of 0.001uA. It operates at a nominal voltage of 15V, making it ideal for industrial applications requiring precise signal amplification in tight spaces.
AD8421ARMZ
AD8421ARMZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 86uV and max average bias current of 0.008uA. It operates at a nominal voltage of 15V, has a bandwidth of 10MHz, and is ideal for industrial applications requiring precise signal amplification.
ADA4254ARUZ-RL
ADA4254ARUZ-RL by Analog Devices is an instrumentation amplifier with 14uV max input offset voltage, 0.014uA max average bias current, and 1.8MHz nominal bandwidth. Ideal for industrial applications requiring precise signal amplification in a compact package with a wide temperature range.
XTR105UA/2K5
XTR105UA/2K5 by Texas Instruments is an instrumentation amplifier with 25uV max input offset voltage, 0.05uA max average bias current, and 24V nominal voltage. Ideal for industrial applications due to its high common mode reject ratio of 86dB and wide operating temperature range from -40°C to 85°C.
AMP03GS-REEL
AMP03GS-REEL by Analog Devices is an instrumentation amplifier with 3MHz bandwidth, 2000uV input offset voltage, and 75dB CMRR. Ideal for industrial applications, it operates b/w -40 to 85 °C with +-15V supplies and a max supply current of 3.5mA.
INA126UA/2K5E4
INA126UA/2K5E4 by Texas Instruments is an instrumentation amplifier with 500uV max input offset voltage, 0.05uA max average bias current, and 15V nominal voltage. Ideal for industrial applications requiring precise signal amplification in a compact package with high gain up to 10000x and low non-linearity of 0.012%.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AD8226ARMZ
AD8226ARMZ by Analog Devices is an instrumentation amplifier with 200uV max input offset voltage, 1.5MHz nominal bandwidth, and 1000 max voltage gain. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.
AD8250ARMZ-R7
AD8250ARMZ-R7 by Analog Devices is an instrumentation amplifier with a max bandwidth of 10 MHz, ideal for industrial applications. It features a low bias current of 0.04 uA and high common mode rejection ratio of 80 dB, making it suitable for precision measurement systems. With a compact square package design and dual terminal position, this CMOS technology amplifier operates within a wide temperature range from -40 to 85 °C.
AD8250ARMZ
AD8250ARMZ by Analog Devices is an instrumentation amplifier with a max voltage gain of 10 and bandwidth of 10 MHz. It operates at industrial temperature grades, with low bias current (0.04 uA) making it suitable for precision measurement applications requiring high common mode rejection ratio (80 dB). The package is small outline, thin profile, ideal for space-constrained designs.
AD8251ARMZ
AD8251ARMZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 250uV, ideal for industrial applications. It operates at a nominal voltage of +/-15V and offers a max bandwidth of 17MHz. With a compact square package shape and dual terminal position, it is suitable for surface mount designs requiring high precision amplification.
AD8226ARMZ-RL
AD8226ARMZ-RL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 200uV, ideal for automotive applications. It offers a nominal bandwidth of 1.5MHz and a max voltage gain of 1000, making it suitable for precision signal processing in harsh environments. With a compact square package shape and surface mount capability, this amplifier is versatile for various electronic designs.
AD8231ACPZ-R7
AD8231ACPZ-R7 by Analog Devices is an instrumentation amplifier with 15uV max input offset voltage, 5mA max supply current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125°C operating temperature range and high common mode reject ratio of 100dB.
AD8253ARMZ-R7
AD8253ARMZ-R7 by Analog Devices is a CMOS instrumentation amplifier with a max supply voltage of ±17V. It has a nominal bandwidth of 10MHz and can operate in industrial temperature range (-40°C to 85°C). This amplifier is commonly used in instrumentation and measurement applications.
AD8250ARMZ-RL
AD8250ARMZ-RL by Analog Devices is an instrumentation amplifier with a max bandwidth of 10 MHz and a voltage gain of up to 10. It operates within a temperature range of -40 to 85 °C and has low bias current, making it ideal for industrial applications requiring precise signal amplification in compact spaces.
AD8253ARMZ
AD8253ARMZ by Analog Devices is an instrumentation amplifier with a max voltage gain of 1000 and bandwidth of 10 MHz. It operates at industrial temperatures from -40 to 85 °C, ideal for precision signal processing in various applications like sensor interfacing and data acquisition systems. The package is small outline, thin profile, with shrink pitch, making it suitable for space-constrained designs.
AD8221ARMZ
AD8221ARMZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 60uV, ideal for precision applications. It operates at a nominal voltage of +-15V and offers a max voltage gain of 1000, ensuring accurate signal amplification. With a small outline package style and industrial temperature grade, it is suitable for compact and robust electronic systems.
AD8226BRMZ
AD8226BRMZ by Analog Devices is an instrumentation amplifier with a supply voltage of +-15V, operating temperature range of -40 to 125°C, and max supply current of 0.6mA. It is suitable for automotive applications due to its nickel palladium gold terminal finish and small outline package style.
AD8226ARZ
AD8226ARZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 200uV and max average bias current of 0.027uA. It operates at a nominal voltage of +-15V, making it suitable for automotive applications requiring precise signal amplification in a compact package.
AD8253ARMZ-RL
AD8253ARMZ-RL by Analog Devices is an instrumentation amplifier with a max voltage gain of 1000 and bandwidth of 10 MHz. It operates at a nominal voltage of +-15V, with low bias current (0.04uA) making it ideal for industrial applications requiring precise signal amplification in tight spaces. The small outline package (1.1mm seated height) and surface mount capability make it suitable for compact designs where space is limited.
AD8251ARMZ-R7
AD8251ARMZ-R7 by Analog Devices is an instrumentation amplifier with a max input offset voltage of 250uV and max average bias current of 0.03uA. It operates at a nominal voltage of 15V, suitable for industrial applications requiring precise signal amplification in tight spaces. The amplifier's compact square package with small outline and thin profile makes it ideal for surface mount designs where space is limited.
AD8231ACPZ-WP
AD8231ACPZ-WP by Analog Devices is an Instrumentation Amplifier with 15uV Max Input Offset Voltage, 0.005uA Max Average Bias Current, and 1MHz Nominal Bandwidth. Ideal for automotive applications due to its 100dB Min Common Mode Reject Ratio and -40 to 125 °C Operating Temperature range.
AD8220ARMZ-R7
AD8220ARMZ-R7 by Analog Devices is an instrumentation amplifier with 250uV max input offset voltage, 74dB CMRR, and +-15V nominal voltage. Ideal for industrial applications requiring precise signal amplification in a compact package with surface mount capability.
AD8231ACPZ-RL
AD8231ACPZ-RL by Analog Devices is an Instrumentation Amplifier with 15uV Max Input Offset Voltage, 0.005uA Max Average Bias Current, and 1MHz Nominal Bandwidth. Ideal for automotive applications due to its high Common Mode Reject Ratio of 100dB and low supply current of 5mA. Surface mountable in a square package with a terminal pitch of 0.65mm.
AD8226ARZ-R7
AD8226ARZ-R7 by Analog Devices is an instrumentation amplifier with 200uV max input offset voltage, 1.5uA max input offset current, and 1.5MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and 80dB min common mode reject ratio.
AD8251ARMZ-RL
AD8251ARMZ-RL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 250uV and max average bias current of 0.03uA. It operates at a nominal voltage of 15V, making it suitable for industrial applications requiring precise signal amplification in tight spaces. With a bandwidth of 17MHz and high common mode rejection ratio of 98dB, this CMOS technology-based amplifier is ideal for sensitive measurement tasks.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved