Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AD650JPZ by Analog Devices is a voltage to frequency converter with 0.005% linearity error, operating at up to 1 MHz frequency. It has a max supply voltage of 18 V and operates in commercial temperature grade range from 0°C to 70°C. Ideal for applications requiring precise voltage to frequency conversion in various electronic systems.
Median Price
$43.610
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$33.400
100+ parts
$27.060
1k+ parts
$26.130
10k+ parts
-
Mouser Electronics
$33.520
Chip1Stop
$44.000
Analog Devices Inc
$57.650
$26.920
Element14
$60.790
$49.250
$47.550
Verical
$33.443
DigiKey
Arrow
Rochester
$29.260
$26.180
$24.640
Digiode
$30.884
Nova Conductors
$34.225
Vyrian
VNN
Semi Source
Prism Electronics
Parana Technologies
$7.431
$6.911
IDEA Electronic Components Group
$7.990
$7.590
Aztec Data Supply Inc.
$10.160
DigiPath Technology Company
$12.464
$11.966
Semicontronic
$27.630
$26.939
$26.801
Corphita
$29.259
Corohmni
$32.100
Netroflash
Continental Prestige Electronics
$36.740
$29.750
Ampacity Inc.
$60.140
Argo Parts USA
Authorized Procurement Solutions
A-Z Elektronik GmbH
Perfect Parts
The use of plastic/epoxy material makes the package lightweight and durable, making it ideal for portable or rugged applications.
The surface mount feature allows for easy and convenient mounting on circuit boards, saving space and making installation simpler.
The high maximum supply voltage allows for compatibility with a wide range of power sources, increasing flexibility in usage.
The square package shape provides a compact design, making it easier to integrate into various electronic systems.
The low linearity error ensures accurate conversion of voltage to frequency, making this converter suitable for precision measurement applications.
The ability to accept a minimum negative supply voltage of -9V allows for bipolar operation and wider input voltage range.
The dual power supply voltage of +-15V offers flexibility in powering the converter and allows for symmetrical operation.
With 20 terminals, this converter provides multiple connection points for input, output, and power, enabling versatile configurations.
The chip carrier package style offers a compact and efficient form factor, suitable for space-constrained applications.
The low minimum supply voltage requirement of 9V allows for operation in a wide range of power environments.
The high maximum operating temperature ensures reliable performance even in demanding thermal conditions.
The low minimum operating temperature allows for operation in cold environments without compromising performance.
The matte tin terminal finish provides good solderability and corrosion resistance, ensuring stable electrical connections.
The quad terminal position layout facilitates easy connections and reduces the risk of errors during installation.
The high maximum negative supply voltage tolerance of -18V allows for versatile bipolar operation with extended input voltage range.
The low seated height of 4.57mm enables a compact overall design, ideal for space-constrained applications.
The narrow width of 8.965mm allows for efficient placement on circuit boards and saves valuable space in electronic systems.
The high peak reflow temperature of 260°C ensures the converter can withstand soldering processes without damage.
The short length of 8.965mm contributes to the overall compactness of the converter, making it suitable for small electronic devices.
The commercial temperature grade indicates that the converter is designed for standard commercial operating conditions, ensuring reliability in typical environments.
The bipolar technology used in this converter allows for precise and stable voltage to frequency conversion, making it suitable for high-accuracy applications.
The J bend terminal form simplifies the soldering process and enhances mechanical stability of the connections, promoting long-term reliability.
The low maximum supply current of 8mA ensures efficient operation with minimal power consumption, making this converter energy-efficient.
As a voltage to frequency converter, this product offers a versatile solution for converting analog signals to frequency, suitable for various control and measurement applications.
The nominal supply voltage of 15V provides a standard operating voltage level for the converter, ensuring compatibility with common power sources.
With a nominal negative supply voltage of -15V, this converter supports symmetrical power supplies for balanced operation.
The narrow terminal pitch of 1.27mm allows for dense packing of terminals on the chip carrier, maximizing connectivity in a compact space.
The high maximum negative input voltage tolerance of -10V ensures compatibility with varying input signal levels, offering versatility in signal processing.
The maximum positive input voltage of 0V indicates that the converter can handle positive input signals without distortion, enabling accurate frequency conversion.
The high maximum operating frequency of 1MHz allows for rapid conversion of voltage to frequency, suitable for high-speed applications requiring quick response times.
Analog Special Purpose Converters AD650JPZ attributes and parameters. Explore more Analog Special Purpose Converters devices from Analog Devices
Converter Type:
Technology:
Maximum Operating Frequency:
Maximum Linearity Error (EL):
No. of Functions:
Nominal Supply Voltage:
Power Supplies:
Minimum Negative Supply Voltage:
Nominal Negative Supply Voltage:
Maximum Negative Supply Voltage:
Maximum Supply Current:
Maximum Positive Input Voltage:
Maximum Negative Input Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temperature Grade:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Finish:
Terminal Pitch:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Body Material:
Package Shape:
Package Style:
Package Code:
Package Equivalence Code:
Qualification:
JESD-30 Code:
JESD-609 Code:
AD650JPZ Converters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Continental Device India
Lite-on Semiconductor
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Shandong Yiguang Electronic Joint Stock
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AD650BD
Analog Devices
AD650BD by Analog Devices is a voltage to frequency converter with 0.005% linearity error, operating at up to 1 MHz. It has a supply voltage range of ±15V and can handle temperatures from -25°C to 85°C. This rectangular package with 14 terminals is ideal for precision frequency measurement applications.
MX536AJEWE+
Maxim Integrated
RMS TO DC CONVERTER; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30;
LTC1967CMS8#TR
Linear Technology
RMS TO DC CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
AD736BR-REEL
AD736BR-REEL by Analog Devices is an RMS to DC converter with a max supply voltage of 16.5V and linearity error of 0.35%. It operates in industrial temperature range from -40°C to 85°C, making it suitable for precision measurement applications requiring accurate conversion of AC signals to DC.
3910
Dymec
3910 by Dymec is a voltage to frequency converter with power supplies of 5V and +-15V. It features 24 terminals, operates b/w 0-70°C, and has a max supply current of 90mA. Ideal for analog special purpose applications requiring precise signal conversion in commercial temperature environments.
MX636KCWE-T
RMS TO DC CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MX536AKETW
RMS TO DC CONVERTER; Terminal Finish: TIN LEAD; JESD-609 Code: e0;
LH0091CD
LH0091CD by National Semiconductor is an Analog Special Purpose Converter with 16 terminals and a max supply voltage of 20V. It operates b/w -25°C to 85°C, converting RMS to DC at a frequency of up to 1MHz. Ideal for applications requiring precise conversion with a low total error rate of 1%.
MX536AKD
RMS TO DC CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
AD536ASH
AD536ASH by Analog Devices is an RMS to DC converter with a max supply voltage of 18V and operating temperature range from -55°C to 125°C. It has a total error of 0.5% and operates at a max frequency of 0.09MHz, making it suitable for military-grade applications requiring accurate signal processing in harsh environments.
LM331N
LM331N by Texas Instruments is an Analog Special Purpose Converter with 0.02% linearity error, operating at 5V. It is a voltage to frequency converter with a max supply voltage of 40V, suitable for commercial applications requiring precise frequency output.
LM2917M-8/NOPB
LM2917M-8/NOPB by Texas Instruments is an Analog Special Purpose Converter with 1% linearity error. It operates at 12V, converts voltage to frequency, and has a max supply voltage of 28V. Ideal for industrial applications requiring precise voltage-to-frequency conversion in a compact package.
AD736AQZ
AD736AQZ by Analog Devices is an 8-terminal RMS to DC converter with a max supply voltage of 16.5V and linearity error of 0.35%. It operates in industrial temperature range, suitable for applications requiring accurate conversion from AC to DC signals at frequencies up to 0.005 MHz.
LM2917N-8/NOPB
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AD7740YRM-REEL7
AD7740YRM-REEL7 by Analog Devices is a voltage to frequency converter with 3.6V max supply, 0.018% linearity error, and 1MHz max operating frequency. Ideal for industrial applications requiring precise voltage conversion in a compact, surface-mount package.
AD652BQ
AD652BQ by Analog Devices is a voltage to frequency converter with 16 terminals. It operates at ±15V power supplies, has a max linearity error of 0.02%, and can handle frequencies up to 4MHz. Ideal for industrial applications requiring precise voltage-to-frequency conversion in a compact rectangular package.
AD537SD
AD537SD by Analog Devices is a voltage to frequency converter with 0.1% linearity error, operating at -55 to 125 °C. It has a max supply voltage of 36 V and operates at a frequency of 0.15 MHz. Ideal for military applications due to its MILITARY grade temperature range and through-hole terminal form.
AD637KQ
AD637KQ by Analog Devices is a RMS to DC converter with 0.05% linearity error, operating at a max frequency of 0.15 MHz. It has a package style of in-line and requires power supplies of +-15V, making it ideal for precision measurement applications requiring accurate conversion from AC to DC signals.
LM2917MX/NOPB
LM2917MX/NOPB by Texas Instruments is a voltage to frequency converter with 1% linearity error, operating at 12V. It has a max supply voltage of 28V and consumes 6mA current. Ideal for industrial applications requiring precise frequency conversion in compact spaces.
LTC1966CMS8#TRPBF
LTC1966CMS8#TRPBF by Analog Devices is an 8-terminal RMS to DC converter with 0.15% linearity error, operating from -40 to 85 °C. It has a small outline package, matte tin finish, and can handle input voltages up to ±5.5 V. Ideal for industrial applications requiring precise conversion of AC signals to DC voltage.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
AD654JRZ
AD654JRZ by Analog Devices is a V/F converter with 0.4% EL, operating at 0.5 MHz max frequency and supporting supply voltages of 5/30/+/-5/+/-15V. Ideal for industrial applications requiring precise voltage-to-frequency conversion in compact spaces due to its small outline package style.
AD654JRZ-REEL7
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
AD654JRZ-REEL
AD654JRZ-REEL by Analog Devices is a voltage to frequency converter with 0.4% linearity error, operating at 0.5 MHz max frequency and supporting supply voltages of 5/30/+/-5/+/-15 V. This industrial-grade device in a small outline package is ideal for applications requiring precise signal conversion in temperature-sensitive environments.
AD654JNZ/+
AD654JNZ/+ by Analog Devices is a voltage to frequency converter with 0.4% linearity error, operating at up to 0.5 MHz frequency. It has a supply voltage range of 4.5V to 36V and operates in industrial temperature grades from -40°C to 85°C. This converter is ideal for applications requiring precise voltage-to-frequency conversion in various industries.
AD654JNZ
AD654JNZ by Analog Devices is a voltage to frequency converter with 0.4% linearity error, operating at 0.5 MHz max frequency and supporting supply voltages from 5V to ±18V. This industrial-grade device in an in-line package is ideal for applications requiring precise voltage-to-frequency conversion within the temperature range of -40°C to 85°C.
AD652AQ
AD652AQ by Analog Devices is a voltage to frequency converter with 16 terminals and a max operating frequency of 4 MHz. It has a linearity error of 0.05% and operates in industrial temperature range from -40 to 85 °C. Ideal for applications requiring precise voltage to frequency conversion in various industries.
AD652AQ/+
AD652AQ/+ by Analog Devices is a voltage to frequency converter with 16 terminals, operating at temperatures from -40 to 85 °C. It has a max supply voltage of 18 V and linearity error of 0.05%. Widely used in industrial applications requiring precise voltage conversion up to 4 MHz frequency output.
AD650JN
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
AD650JN/+
AD650KN
AD650KNZ
AD650JNZ
AD650JP
AD650JP by Analog Devices is a voltage to frequency converter with a max operating frequency of 1 MHz. It has a max supply voltage of 18 V and operates within a temperature range of 0 to 70 °C. This converter is commonly used in analog special purpose applications.
AD650AD
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
AD654JN
AD654JN/+
AD650SD
AD650SD by Analog Devices is a voltage to frequency converter with 0.005% linearity error, operating at up to 1 MHz frequency. It has a max supply voltage of 18 V and operates in temperatures ranging from -55°C to 125°C. Ideal for military applications due to its MILITARY grade technology and through-hole terminal form.
AD650SD/883B
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
AD652JP-REEL7
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved