Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RMS TO DC CONVERTER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Median Price
$20.890
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$15.130
100+ parts
$11.740
1k+ parts
$10.450
10k+ parts
-
Analog Devices Inc
$19.850
$11.350
$10.440
DigiKey
$21.930
$15.259
$14.341
Mouser Electronics
$15.250
$14.340
Newark
$22.590
$15.720
$14.770
Element14
$27.440
$21.300
$18.950
Verical
$9.680
Arrow
$14.710
$13.014
Nova Conductors
$12.680
Digiode
$14.374
Chip Stock
Anansix
Vyrian
MARBEL Systems
$5.313
Texas Native Microelectronics
$6.107
$5.863
$5.680
$5.374
Kenton Components
$7.328
$6.449
Ampacity Inc.
$8.230
One Stop Electronics
Corohmni
$11.250
Advanced Electronics
$11.588
$11.008
Bastille Electronics
$12.046
$11.285
Corphita
$13.617
Modulus Dynamics
$14.075
$13.934
$13.512
Vigor
$14.690
Component Stockers USA
$9.470
Continental Prestige Electronics
$15.420
$11.970
Qasali Group International
$16.489
$15.335
$14.510
Semicontronic
$17.910
$17.462
$17.373
Parana Technologies
$19.446
$18.085
IDEA Electronic Components Group
$20.910
$19.864
Aztec Data Supply Inc.
$24.360
DigiPath Technology Company
$32.620
$31.315
Microchip USA
$51.408
Futuretech Components
Argo Parts USA
Perfect Parts
Robosynatics
Lucentia Tech
$0.048
Analog Special Purpose Converters LTC1966HMS8#PBF attributes and parameters. Explore more Analog Special Purpose Converters devices from Linear Technology
Converter Type:
Technology:
Maximum Linearity Error (EL):
No. of Functions:
Nominal Supply Voltage:
Power Supplies:
Minimum Negative Supply Voltage:
Nominal Negative Supply Voltage:
Maximum Negative Supply Voltage:
Maximum Supply Current:
Maximum Positive Input Voltage:
Maximum Negative Input Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temperature Grade:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Finish:
Terminal Pitch:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Body Material:
Package Shape:
Package Style:
Package Code:
Package Equivalence Code:
Qualification:
JESD-30 Code:
JESD-609 Code:
LTC1966HMS8#PBF Converters trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mult Dev Mark Chg 3/Feb/2020 Mult Dev 11/Oct/2022
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Surge Components
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Diodes Incorporated
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
BSS84-7-F
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Secos
MX636JD
Maxim Integrated
RMS TO DC CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
AD651BQ
Analog Devices
AD651BQ by Analog Devices is a voltage to frequency converter with 16 terminals. It operates b/w -25 to 85 °C, with linearity error of 0.02%. Suitable for applications requiring conversion of voltages up to 10 V at a max frequency of 4 MHz.
LM2907M-8/NOPB
Texas Instruments
LM2907M-8/NOPB by Texas Instruments is an Analog Special Purpose Converter with 1% linearity error, operating at -40 to 85 °C. It converts voltage to frequency, suitable for industrial applications. With a max supply voltage of 28 V and low supply current of 6 mA, it comes in a small outline package measuring 4.9mm x 3.9mm x 1.75mm.
VFC320CM
VFC320CM by Texas Instruments is a voltage to frequency converter with 0.03% linearity error, operating at up to 1 MHz. It has a max supply voltage of 20V and can function in industrial temperatures from -40°C to 85°C. Ideal for applications requiring precise frequency conversion in harsh environments.
AD8436BRQZ-R7
AD8436BRQZ-R7 by Analog Devices is a bipolar RMS to DC converter with +-2.4/+-18/4.8/36 V power supplies, 20 terminals, and 0.365 mA max supply current. It operates in automotive grade conditions from -40 to 125 °C, making it ideal for precision signal processing applications requiring accurate conversion of RMS signals to DC voltage.
LM2907D14
LM2907D14 by Texas Instruments is a voltage to frequency converter with 1% linearity error, operating at 12V. It features 14 terminals in a small outline package for industrial applications. With a max supply current of 6mA, it offers precise conversion in a compact form factor.
LM231N/NOPB
National Semiconductor
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AD637SD/883B
AD637SD/883B by Analog Devices is a MILITARY-grade RMS to DC converter with 0.05% linearity error, operating at -55 to 125 °C. It features a max supply voltage of ±18 V and operates at a frequency of 0.15 MHz. Ideal for applications requiring precise signal conversion in harsh environments.
VFC110APG4
VFC110APG4 by Texas Instruments is a voltage to frequency converter with 14 terminals and a max supply voltage of 18 V. It offers high linearity error of 0.1% and operates b/w -25°C to 85°C, making it suitable for precision measurement applications requiring accurate frequency conversion up to 4 MHz.
AD636JCWE
RMS TO DC CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
AD737JR-REEL7
AD737JR-REEL7 by Analog Devices is an RMS to DC converter with 0.35% linearity error, operating at -3.2V to 16.5V supply voltage range. Ideal for commercial applications, it features a small outline package and Gull Wing terminals for easy surface mounting in temperature-sensitive environments up to 70°C.
AD736KR
AD736KR by Analog Devices is an RMS to DC converter with a max supply voltage of 16.5V and linearity error of 0.35%. It operates b/w -3.2V to 16.5V, suitable for commercial applications requiring accurate conversion of AC signals to DC voltage in a compact small outline package.
AD536AKH
AD536AKH by Analog Devices is an RMS to DC converter with a max supply voltage of 18V and operating frequency of 0.09MHz. It has a total error of 0.2%, suitable for commercial temperature grades, and features a cylindrical package shape made of metal. This converter is ideal for applications requiring accurate conversion in analog special purpose systems.
ADVFC32SH
ADVFC32SH by Analog Devices is a voltage to frequency converter with 0.2% max linearity error, operating at frequencies up to 0.5 MHz. It has a package style of cylindrical metal body and operates in temperatures ranging from -55°C to 125°C, making it suitable for military-grade applications requiring precise frequency conversion within an 18V supply range.
TC9400CPD
Telcom Semiconductor
VOLTAGE TO FREQUENCY CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
LTC1966CMS8#PBF
RMS TO DC CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
AD8436ACPZ-R7
AD8436ACPZ-R7 by Analog Devices is a 20-terminal RMS to DC converter with a max supply voltage of 18V and operating temperature range from -40°C to 125°C. It is designed for automotive applications, featuring a square package shape and terminal finish in matte tin. The converter has a low supply current of 0.4mA and supports negative input voltages up to -18V.
AD637ARBR
AD637ARBR by Analog Devices is a 16-terminal RMS to DC converter with 0.05% linearity error, operating at frequencies up to 0.15 MHz. It has a supply voltage range of 3-18 V and temperature range of -40 to 85 °C, making it ideal for industrial applications requiring precise signal conversion.
AD536AJC/D
AD536AJC/D by Analog Devices is a bipolar RMS to DC converter with 5/36V power supplies, operating from 0 °C to 70°C. It has a max supply current of 2mA and is used in commercial applications requiring accurate conversion of AC signals to DC for further processing.
AD536AJCWE
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTC1966CMS8#PBF by Analog Devices is a CMOS technology-based RMS to DC converter with a max supply voltage of 5.5V and a min operating temperature of -40°C. It is used in industrial applications for accurate conversion of AC signals to DC signals.
LTC1966IMS8#PBF
LTC1966IMS8#PBF by Analog Devices is an 8-terminal RMS to DC converter with 0.15% linearity error, operating b/w -40°C to 85°C. It has a supply voltage range of 2.7V to 5.5V and can handle input voltages from -5.5V to 5.5V, making it ideal for industrial applications requiring precise signal conversion in a compact square package.
LTC1966CMS8#TRPBF
LTC1966CMS8#TRPBF by Analog Devices is an 8-terminal RMS to DC converter with 0.15% linearity error, operating from -40 to 85 °C. It has a small outline package, matte tin finish, and can handle input voltages up to ±5.5 V. Ideal for industrial applications requiring precise conversion of AC signals to DC voltage.
LTC1966IMS8#TRPBF
LTC1966IMS8#TRPBF by Analog Devices is an 8-terminal RMS to DC converter with 0.15% max linearity error, operating from -40 to 85 °C. It has a supply voltage range of 2.7V to 5.5V and supports industrial temperature grade applications in a small outline package for surface mount use.
LTC1966HMS8#PBF
LTC1966HMS8#PBF by Analog Devices is an 8-terminal RMS to DC converter with 0.15% linearity error, operating from -55 to 125 °C. It has a supply voltage range of 2.7V to 5.5V and supports both positive and negative input voltages up to ±5.5V. Ideal for military-grade applications requiring precise signal conversion in a compact square package with surface mount capability.
LTC1966IMS8
LTC1966IMS8 by Analog Devices is an 8-terminal RMS to DC converter with a max supply voltage of 5.5V and linearity error of 0.15%. It is used in industrial applications requiring precise signal conversion, operating b/w -40°C to 85°C.
LTC1966MPMS8#PBF
LTC1966MPMS8#PBF by Analog Devices is an RMS to DC converter with 0.15% max linearity error, operating from -55°C to 125°C. It has a small outline package and is suitable for military-grade applications requiring precise signal conversion in a compact form factor.
LTC1966CMS8#TR
LTC1966CMS8#TR by Analog Devices is an 8-terminal RMS to DC converter with 0.15% linearity error, operating from -40°C to 85°C. It has a supply voltage range of 2.7V to 5.5V and is ideal for industrial applications requiring precise signal conversion in a compact square package.
LTC1966CMS8
RMS TO DC CONVERTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
LTC1966CMS8 by Analog Devices is a small outline, thin profile, shrink pitch RMS to DC converter with 8 terminals. It has a max supply voltage of 5.5V and a min operating temperature of 0°C. This converter is commonly used in analog special purpose applications.
LTC1966MPMS8#TRPBF
LTC1966MPMS8#TRPBF by Analog Devices is a CMOS technology RMS to DC converter with 0.15% max linearity error. It operates b/w -55°C to 125°C, has a supply voltage range of 2.7V to 5.5V, and is ideal for military-grade applications requiring accurate signal conversion in a compact thin profile package.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved