Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; Manufacturer Series: C146A;
Median Price
$0.611
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
PEI Genesis
1+ parts
$0.340
100+ parts
-
1k+ parts
10k+ parts
Distrelec
$0.574
$0.520
$0.444
$0.412
DigiKey
$0.960
$0.691
$0.587
$0.550
Mouser Electronics
$0.696
$0.591
$0.531
Verical
TME
$49.030
Quittner & Schimek s.r.o.
ACDS - Activité Composants Distribution Service
Gateway Technologies
$7.000
$6.230
Singapore Electronics
$7.700
$7.161
$6.853
$6.544
Abacus Technologies
Assembly Products VN020160025(1)C attributes and parameters. Explore more Assembly Products devices from Amphenol
Connector Accessory Type:
Manufacturer Series:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
Formosa Microsemi
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
M23053/5-106-9
Insultab
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; IEC Conformity: NO; MIL Conformity: NO; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE;
131250-006
TE Connectivity
CONNECTOR ACCESSORY; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Material: ELASTOMER;
AT06-3S-CAP
Amphenol
CONNECTOR ACCESSORY;
16-02-0087
Molex
DF22A-1416SCFA
Hirose Electric
W4PA
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Material: POLYBUTYLENE TEREPHTHALATE; Design: POWER AND SIGNAL; Minimum Operating Temperature: -55 Cel;
64325-1023
CONNECTOR ACCESSORY; Assembly Item Name: SEALING ITEM; Maximum Operating Temperature: 125 Cel; DIN Conformity: NO; IEC Conformity: NO; Usage: 64318, 64319, 64320, 64321;
43031-0002
The Molex 43031-0002 CONTACT features a CRIMP terminal type with CHAIN contact design. It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.073 inch. Ideal for use in assemblies such as 43020, 43640, and 44300.
350551-6
The TE Connectivity 350551-6 is a universal mate-n-lok plug/socket housing with stranded construction and crimp terminals. Rated for 600V AC/DC, it has a max temp of 105°C and min temp of -55°C. With approvals from CSA and VDE, it's ideal for power applications with wire sizes ranging from 20-14 AWG.
206138-8
TE Connectivity's 206138-8 cable clamp has UL approval, shell size of 23, and max wire size of 0 AWG. It is made of polyethylene and mounts straight with a screw option. Ideal for securing cables in various assemblies.
08-50-0105
Molex 08-50-0105 contact features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 2139, 3001, and 3069 assemblies. Suitable for FEMALE contacts with a 0.11 inch cable entry.
50217-9101
Molex 50217-9101 is a female contact with square pin-socket style, made of brass. It is designed for 51067 series housing with crimp terminal type. Suitable for wire sizes ranging from 24 AWG to 18 AWG, with min cable entry of 0.055" and max of 0.118".
HKP-F413
Honda Tsushin Kogyo
HKP-F413 by Honda Tsushin Kogyo is a female contact assembly product with a finish thickness of 4. It features crimp terminals, loose contact design, and square pin-socket style. Ideal for applications requiring straight mounting, it accommodates wire sizes from 28 AWG to 24 AWG using phosphor bronze material.
AWM-12S
500588001
Molex 500588001 is a UL approved assembly product with crimp terminal type. It has a rated current of 1.5A, contact resistance of 20 mohm, and operating temperature range from -40 to 105 °C. Primarily used for 51021 HOUSING applications due to its FEMALE contact gender and BLADE PIN-SKT design.
216-208
Wago
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 10 AWG; MIL Conformity: NO; Assembly Item Name: FERRULE; IEC Conformity: NO; Additional Features: STANDARD: DIN 46228;
1060-16-1222
TE Connectivity 1060-16-1222 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 12 AWG and rated current of 13 A. Ideal for applications requiring male contact gender, with operating temperatures ranging from -55°C to 125°C.
1SNK908302R0000
TE Connectivity's 1SNK908302R0000, made of POLYAMIDE, operates b/w -55 to 110 °C with a max AC/DC voltage of 600 V. It supports up to 0 AWG wire size and handles a rated current of 57 A. Ideal for various assembly applications requiring high voltage and current capabilities.
61030012016010
Harting Electronics & Kg
The Harting Electronics & Kg 61030012016010 HOOD is made of METAL with Mounting Options: SCREW and 4-40. It has a Max Operating Temperature of 90°C and Min Operating Temperature of -20°C. Ideal for assembly applications requiring durable, screw-mounted metal hoods.
A3B-2630SCC
A3B-2630SCC by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, suitable for STRAIGHT mounting. Made of PHOSPHOR BRONZE, it features BELLOWED contact style and 0.09" terminal length. Ideal for various assembly applications requiring reliable electrical connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved