Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Sensors/Transducers;
Median Price
$92.050
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
100+ parts
$58.020
1k+ parts
-
10k+ parts
Nova Conductors
$54.800
Vyrian
AZTECH Wire
$5.964
Aranea Global
$53.704
$51.556
Gateway Technologies
$48.771
Continental Prestige Electronics
Singapore Electronics
$60.279
$56.059
$53.648
$51.237
Ampacity Inc.
$67.020
Argo Parts USA
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358N
Silicon Group
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitano Enterprise
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LM96163CISD/NOPB
National Semiconductor
Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 10; Package Shape or Style: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; JESD-609 Code: e3;
FS2012-1020-NG
Renesas Electronics
FS2012-1020-NG by Renesas Electronics is a MASS AIR FLOW SENSOR with 6 terminals, offering an output range of 0-5V. It operates b/w 0-85°C, with a supply voltage range of 4.75-5.25V. Ideal for automotive applications due to its accuracy and analog voltage output.
ACS37002LMCATR-050B3
Allegro MicroSystems
ACS37002LMCATR-050B3 by Allegro MicroSystems is a current sensor with a supply voltage range of 3.15V to 3.6V and an output range of 0.3-3V. It is designed for surface mount applications and has a max operating temperature of 150°C.
SCD42-D-R2
Sensirion Ag
SCD42-D-R2 by Sensirion Ag is a gas sensor with 21 terminals. It operates b/w -10°C to 60°C, providing digital output. With a max accuracy of 9%, it is suitable for surface mount applications in various industries.
ACS730KLCTR-50AB-T
ACS730KLCTR-50AB-T by Allegro MicroSystems is a current sensor with 8 terminals, outputting analog voltage in the range of 0.2-4.6V. It operates b/w -40 to 125°C, suitable for surface mount applications measuring currents up to 5.5V in plastic packages.
ACS723LLCTR-40AU-T
Allegro MicroSystems' ACS723LLCTR-40AU-T is a current sensor with 8 terminals, operating from -40 to 150°C. It offers analog voltage output, BICMOS technology, and requires 4.5-5.5V supply voltage. Ideal for surface mount applications in various industries due to its compact size of 3.9" x 4.9mm x 1.75mm dimensions.
ACS712ELCTR-05B-T
ACS712ELCTR-05B-T by Allegro MicroSystems is a current sensor with 8 terminals. It operates b/w -40 to 85°C, providing analog voltage output at 4.5-5.5V supply voltage range. This rectangular surface-mount sensor in plastic package is ideal for various applications requiring precise current measurements.
HO250-P-0100
Lem International Sa
CURRENT SENSOR;
HIH-4602-L-CP
Honeywell Sensing And Control
L18P003S05
Tamura
HLSR32-SM/SP33
HLSR32-SM/SP33 by Lem International Sa is a current sensor with voltage output. It operates b/w -40°C to 105°C, with supply voltage range of 3.135V to 3.465V. This sensor has 10 terminals and is designed for surface mount applications.
KXTJ3-1057
ROHM's KXTJ3-1057 is a 12-terminal accelerometer with output range of 0.40-1.60V, suitable for applications requiring digital voltage output. With a supply voltage range of 1.71V to 3.6V and operating temperature from -40°C to 85°C, it utilizes silicon micromachine technology in a compact square package ideal for surface mount installations.
SHT45-AD1B-R2
Sensirion Ag's SHT45-AD1B-R2 is a humidity and temperature sensor with 4 terminals, operating b/w -40 to 125°C. It has a digital output voltage, requiring a supply voltage of 1.08V to 3.6V for surface mount applications in various industries. The sensor's compact square shape measures 1.5mm x 1.5 inch x 0.54 mm, making it suitable for precise environmental monitoring.
ACS725LLCTR-30AU-T
Allegro MicroSystems' ACS725LLCTR-30AU-T is a current sensor with 3V to 3.6V supply voltage range, AEC-Q100 screening level, and analog voltage output. Ideal for automotive applications due to its compact rectangular shape, surface mount feature, and wide operating temperature range from -40°C to 150°C.
MC3419
Memsic
ACHS-7122-000E
Broadcom
Broadcom ACHS-7122-000E is a current sensor with voltage output. It operates b/w -40 to 110°C, suitable for various applications. With 8 terminals and dimensions of 5.08x3.937x1.908 mm, it's ideal for surface mount installations in electronic systems.
LS03-1A66-PP-500W
Standex-meder Electronics
TMCS1108A3BQDRQ1
Texas Instruments
TMCS1108A3BQDRQ1 by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40°C to 125°C, providing analog voltage output. With AEC-Q100 screening level, it's ideal for automotive applications due to its surface mount feature and plastic/epoxy package material.
TCS3200D-TR
Ams Ag
AMBIENT LIGHT SENSOR;
HY10-P
HY10-P by Lem International Sa is a current sensor with output range of -4-4V. It operates b/w -10 to 80°C, suitable for various applications. With a max supply voltage of 15.75V and housing in plastic, it's ideal for through hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SGX-4CO
Amphenol
SGX-4SO2
SGX-4CL2
SGX-4CO-LC
SGX-4NH3-1000
SGX-4NH3-300
SGX-4NO2
SGX-4DT
SGX-4OX
SGX-4H2S-300
SGX-4NO-250
SGX-4NH3-100
SGX-4NO2-2E
SGX-4H2S-100
SGX-4CO-2E
SGX-4OX-EL
SGX-4ETO
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved