Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Sensors/Transducers;
Median Price
$60.290
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$47.940
1k+ parts
-
10k+ parts
DigiKey
$49.203
Nova Conductors
$44.877
Vyrian
AZTECH Wire
$10.231
Gateway Technologies
$40.050
$35.644
Singapore Electronics
$44.054
$40.970
$39.208
$37.445
Netroflash
$42.633
$41.736
Ampacity Inc.
$56.970
Authorized Procurement Solutions
Other Function Sensors & Transducers SGX-4OX-EL attributes and parameters. Explore more Other Function Sensors & Transducers devices from Amphenol
Other Names:
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semiconductor Technology
Synsemi
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
Changzhou Starsea Electronics
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
ACS37002LMABTR-050U3
Allegro MicroSystems
Allegro MicroSystems' ACS37002LMABTR-050U3 is a current sensor with 16 terminals, outputting analog voltage in the range of 0.3-3.0V. Operating b/w -40 to 150°C, it has a supply voltage range of 3.15-3.6V and AEC-Q100 screening for automotive applications like battery management systems.
DS1631S/TR
Dallas Semiconductor
DS1631S/TR by Dallas Semiconductor is an 8-terminal sensor with a power supply of 3/5V. It operates b/w -55°C to 125°C, drawing a max current of 1.25mA. This rectangular surface-mount sensor is ideal for applications requiring precise temperature monitoring in various environments.
2316851-1
TE Connectivity
HX05-P
Lem International Sa
HX05-P by Lem International Sa is a current sensor with 6 terminals, outputting -4-4V analog voltage. It operates b/w -25 to 85 °C and has a supply voltage range of 14.25-15.75 V. This rectangular sensor, housed in plastic, is ideal for through-hole mounting applications.
KXTJ3-1057
ROHM
ROHM's KXTJ3-1057 is a 12-terminal accelerometer with output range of 0.40-1.60V, suitable for applications requiring digital voltage output. With a supply voltage range of 1.71V to 3.6V and operating temperature from -40°C to 85°C, it utilizes silicon micromachine technology in a compact square package ideal for surface mount installations.
QT60168-ASG
Microchip Technology's QT60168-ASG is a capacitive touch sensor with 32 terminals. It operates b/w -40 to 105°C, outputting digital voltage ranging from 0.60-4.30V. This square-shaped sensor, made of plastic/epoxy, is ideal for surface mount applications in various industries.
3025
Honeywell International
SPEED SENSOR; No. of Terminals: 2; Package Shape or Style: CYLINDRICAL; Minimum Operating Temperature: -40 Cel; Body Length/Diameter: 11 mm; Maximum Operating Temperature: 107 Cel;
MTCH105-I/ST
SENSOR CONTROLLERS; Terminal Finish: MATTE TIN;
AT42QT1011-TSHR
AT42QT1011-TSHR by Microchip is a capacitive touch sensor with 6 terminals, operating voltage range of 1.8V to 5.5V, and digital output voltage from 0.50-2.30V. It is ideal for applications requiring precise touch sensing in automotive or industrial environments due to its TS16949 screening level and wide temperature range (-40°C to 85°C).
1230-015A-3L
Ic Sensors
ACS722LLCTR-40AB-T
CURRENT SENSOR;
LTR-390UV-01
Lite-on Technology
The Lite-on Technology LTR-390UV-01 is an ambient light sensor with a max supply voltage of 3.6V and output type of digital voltage. With a compact body width of 2", it operates in temperatures ranging from -40°C to 85°C, making it ideal for applications requiring precise light detection in various environments.
ACS713ELCTR-30A-T
ACS713ELCTR-30A-T by Allegro MicroSystems is a current sensor with 8 terminals, operating b/w -40°C to 85°C. It provides analog voltage output at a max supply voltage of 5.5V and min of 4.5V. This rectangular-shaped sensor in plastic package is ideal for surface mount applications in various industries.
AS7341-DLGT
Ams Ag
AS7341-DLGT by Ams Ag is a SPECTRUM SENSOR with 8 terminals, operating voltage range of 1.7V to 2V. It offers digital voltage output via open-drain configuration and operates b/w -30°C to 85°C. Ideal for applications requiring precise spectral sensing in compact form factor.
ICM-42688-P
TDK
ICM-42688-P by TDK is a 3.6V accelerometer/gyroscope with 14 terminals, operating from -40 to 85°C. It outputs digital voltage in the range of 0.18-1.62V via open-drain technology. Ideal for applications requiring precise motion sensing in compact spaces due to its small size and surface mounting feature.
ACS725LLCTR-40AB-T
Allegro MicroSystems' ACS725LLCTR-40AB-T is a current sensor with 3V to 3.6V supply voltage range, AEC-Q100 screening level, and -40°C to 150°C operating temperature. It features an analog voltage output and is ideal for automotive applications due to its surface mounting feature and BICMOS technology.
ZMOD4510AI1V
Renesas Electronics
ZMOD4510AI1V by Renesas Electronics is a gas sensor with digital output. It operates b/w -40°C to 65°C, with supply voltage ranging from 1.7V to 3.6V. This square-shaped sensor has 12 terminals and gold finish, ideal for surface mount applications in various industries.
ACS710KLATR-12CB-T
ACS710KLATR-12CB-T by Allegro MicroSystems is a current sensor with 16 terminals. It operates b/w -40°C to 125°C, providing analog voltage output. With a package size of 10.21mm x 7.5in x 2.34mm, it's ideal for surface mount applications in various industries.
ATS605LSGTN-S-T
ATS605LSGTN-S-T by Allegro MicroSystems is a SPEED/DIRECTION SENSOR with 4 terminals, operating from -40 to 150°C. It has a supply voltage range of 4-24V and outputs DIGITAL VOLTAGE via OPEN-DRAIN. Ideal for applications requiring precise speed and direction sensing in various industries.
BNO085
Ceva
BNO085 by Ceva is a SENSOR MODULE with voltage output range of 0.34-1.36V, suitable for surface mount applications. It operates b/w -40 to 85°C, with supply voltage ranging from 1.7 to 3.6V, making it ideal for various sensor and transducer functions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SGX-4OX
Amphenol
SGX-4CO-10K
SGX-4NO2
SGX-4CO
SGX-4SO2
SGX-4CL2
SGX-4CO-LC
SGX-4NH3-1000
SGX-4NH3-300
SGX-4DT
SGX-4H2S-300
SGX-4NO-250
SGX-4NH3-100
SGX-4NO2-2E
SGX-4H2S-100
SGX-4CO-2E
SGX-4ETO
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved