Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Minimum Operating Temperature: -20 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$1.000
100+ parts
1k+ parts
$0.890
10k+ parts
Singapore Electronics
$1.100
$1.023
$0.979
$0.935
Telecom & Datacom Connectors RJSA-538A-08 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
RJSA-538A-08 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitronic Enterprise
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
Taiwan Semiconductor
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
Surge Components
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2171780001
Molex
TELECOM AND DATACOM CONNECTOR;
46765-2001
Molex 46765-2001 is a telecom & datacom connector with 0.256" body length, 10000000 ohm insulation resistance, and 200VAC dielectric voltage. Ideal for board mounting with GLASS FILLED LIQUID CRYSTAL POLYMER insulator, it operates b/w -30 to 85 °C and has a durability of 5000 cycles.
87824-0010
Molex 87824-0010 is a Telecom & Datacom Connector with 29 contacts, Matte Tin finish, and Glass Filled Liquid Crystal Polymer insulator. It has a body length of 1.682", suitable for board mounting applications in telecom and datacom systems. The connector is polarized, durable up to 500 cycles, and operates b/w 0°C to 55°C temperature range.
95501-6889
Molex 95501-6889 is a Telecom & Datacom Connector with 0.6" body length, 0.453" width, and 0.809" depth. Insulation resistance of 500M ohm, matte tin over nickel termination finish. Ideal for telecom and datacom applications due to its surface mount termination type and right angle mounting style.
09454521910
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
FCN-365P008-AU
Fujitsu
FCN-365P008-AU by Fujitsu is a Telecom & Datacom Connector with 8 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -55°C to 85°C. Ideal for commercial applications requiring reliable board mounting with solder termination.
MRJ-5381-013
Amphenol
Amphenol MRJ-5381-013 is a Telecom & Datacom Connector with 500M ohm Insulation Resistance, 1500 VAC Dielectric Withstanding Voltage, and GOLD OVER NICKEL Termination. Ideal for applications requiring POLYETHYLENE insulator material, PHOSPHOR BRONZE contact material, and 8 contacts in a RECEPTACLE shell style.
RJHSE-5381-06
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
GSB4211311WEU
AMPHENOL ICC
GSB4211311WEU by Amphenol Icc is a USB connector with a nickel shell finish and a total of 4 contacts. It is made of polybutylene terephthalate/polyethylene insulator material and has a copper alloy shell. This connector is commonly used in telecom and datacom applications for board mounting in a right angle configuration.
5555164-1
TE Connectivity
TE Connectivity 5555164-1 is a Telecom & Datacom Connector with 0.608" body length, 0.5" width, and PBT-POLYESTER insulator. It has 500M ohm insulation resistance, operates b/w -40 to 85°C, and features a polarized housing for durability. Ideal for telecom and datacom applications requiring reliable signal connections.
PCR-E20FS
Honda Tsushin Kogyo
PCR-E20FS by Honda Tsushin Kogyo is a 20-contact telecom/datacom connector with 0.05" pitch, suitable for commercial applications. Featuring a dielectric voltage of 500VAC and insulation resistance of 1Gohm, it has a nickel finish, solder termination, and can handle up to 1A signal current. Ideal for use in telecommunications and data communication systems.
A-2004-2-4-LPS-N-R
Assmann Wsw Components
A-2004-2-4-LPS-N-R by Assmann Wsw Components is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. Featuring gold over nickel finish, it has an insulation resistance of 500M ohm and withstands up to 1000VAC. Ideal for telecom and datacom applications, this connector offers durability of 500 cycles and operates b/w -40°C to +85°C.
UE86-3G4420-60361
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: UE86-3G4420;
292304-5
TE Connectivity's 292304-5 USB connector features gold termination, polyethylene insulator, and phosphor bronze contacts. With a rated current of 1A, it is ideal for telecom applications requiring high durability and reliability in commercial settings. The connector has a right-angle mounting style with solder termination and operates within a temperature range of -55 to 85°C.
UX60-MB-5ST(70)
Hirose Electric
The Hirose Electric UX60-MB-5ST(70) is a USB connector with 5 contacts, rated at 1A signal current. It features liquid crystal polymer insulation, operates b/w -30°C to 75°C, and has a durability of 5000 cycles. Ideal for telecom/datacom applications due to its compact size and surface mount termination.
48406-0003
Molex 48406-0003 is a USB connector with 9 contacts, POLYETHYLENE insulator, and FEMALE contact gender. Ideal for Telecom & Datacom applications, it features RIGHT ANGLE mounting on BOARD with SOLDER termination.
10150-6000EC
3m Electronic Products Division
10150-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications due to its gold over nickel termination contact finish, glass-filled polyester insulator material, and beryllium copper contact material.
SS-6488S-A-NF
Bel Fuse
Bel Fuse SS-6488S-A-NF is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell material. It has 8 contacts in a polarized housing for PCB mounting at 0.635" x 0.55" x 0.85". Ideal for commercial applications requiring right-angle board mounting with staggered terminal pitch of 2.54mm.
2041126-1
TE Connectivity's 2041126-1 is a Telecom & Datacom Connector with EMI shielding, 0.45" body depth, and polyethylene insulator. It operates b/w -40 to 85°C, has 8 contacts, and a nickel-finished brass shell. Ideal for telecom and datacom applications requiring surface mount termination on boards.
543-4
Regal Electronics
543-4 by Regal Electronics is a Telecom & Datacom Connector with 0.591" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting in telecom applications, it features a GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and PHOSPHOR BRONZE contacts. Operating from -55 to 105°C, this right-angle jack connector offers reliable performance meeting CSA and UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved