Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Insulator Material: POLYETHYLENE; PCB Contact Pattern: STAGGERED; Total No. of Contacts: 24;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$10.000
100+ parts
1k+ parts
$8.900
10k+ parts
Singapore Electronics
$11.000
$10.230
$9.790
$9.349
Telecom & Datacom Connectors RJHSE-508F-03 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
RJHSE-508F-03 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
Grande Electronics
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Yangzhou Yangjie Electronics
5555164-1
TE Connectivity 5555164-1 is a Telecom & Datacom Connector with 0.608" body length, 0.5" width, and PBT-POLYESTER insulator. It has 500M ohm insulation resistance, operates b/w -40 to 85°C, and features a polarized housing for durability. Ideal for telecom and datacom applications requiring reliable signal connections.
RJHSE-5080
Amphenol
Amphenol RJHSE-5080 is a Telecom & Datacom Connector with 8 contacts, 0.62"x.52"x.59" dimensions, and POLYETHYLENE insulator. It features Matte Tin termination, GOLD mating finish, and PHOSPHOR BRONZE contact material. Ideal for board and panel mounting in telecom applications due to its polarized housing and right angle mounting style.
MUSB-05-S-B-SM-A-TR
Samtec
Samtec MUSB-05-S-B-SM-A-TR is a USB connector with 5 contacts, matte tin finish, and phosphor bronze material. It has a durability of 1500 cycles and operates b/w -50 to 85°C. Ideal for telecom/datacom applications due to its right-angle mounting style and surface mount termination.
76866-1013
Molex
The Molex 76866-1013 is a telecom and datacom connector with 144 contacts. It features a glass-filled polyethylene insulator material and has a UL flammability code of 94V-0. This right-angle mounting connector is suitable for board and panel applications.
USB-RS422-WE-1800-BT
FTDI
USB-RS422-WE-1800-BT by FTDI features USB2.0 A male connector with 9 contacts, operating temp range of -40 to 85°C. Ideal for telecom/datacom applications, it offers polarized housing and locking mounting option for secure cable termination.
RJHSE-5384-A1
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR;
10150-6000EC
3m Electronic Products Division
10150-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications due to its gold over nickel termination contact finish, glass-filled polyester insulator material, and beryllium copper contact material.
6339191-4
TE Connectivity 6339191-4 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and 8 contacts. It has a body length of 0.64", operates b/w -40 to 85°C, and features a right-angle mounting style. Ideal for telecom and datacom applications requiring high durability and reliability.
SCRU-02
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; IEC Conformity: NO; Contact Material: PHOSPHOR BRONZE;
2041411-1
TE Connectivity 2041411-1 is a EMI shielded telecom & datacom connector with GLASS FILLED POLYAMIDE9T insulator. It has 8 contacts, rated at 1.5A for signal current, and operates b/w -40 to 85°C. Ideal for board mounting applications due to its right angle mounting style and solder termination type.
SS-32
Bel Fuse
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Additional Features: SHIELDED, MAX CONTACTS (SERIES)=10; MIL Conformity: NO;
1-1546405-1
TE Connectivity 1-1546405-1 is a Telecom & Datacom Connector with ABS insulator, 8 contacts, and 2 PCB rows. It operates b/w -20°C to 80°C, rated at 1.5A for signal current. Ideal for telecom applications requiring polarized housing and solder termination on panel mounting.
67643-2910
Molex 67643-2910 USB connector features 4 contacts, with insulation resistance of 1Gohm and dielectric voltage of 750VAC. Ideal for telecom/datacom applications, it has a solderable board mounting option and operates b/w -40 to 85°C.
921
Keystone Electronics
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Minimum Operating Temperature: -25 Cel;
5-2337992-5
TE Connectivity 5-2337992-5 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40°C to 85°C, and mounts on a board lock for right-angle installation.
RB1-125BAG1A
Ude
RB1-125BAG1A by Ude is a Telecom & Datacom Connector with 8 contacts. Features include Matte Tin over Nickel termination, Polyethylene insulator, and Gold Flash over Nickel mating contact finish. Ideal for board mounting applications requiring female connectors with right angle mounting style.
USB4070-30-C
Global Connector Technology
USB4070-30-C by Global Connector Technology is a USB connector with 24 contacts, rated at 0.25A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100MΩ. Ideal for telecom/datacom applications, this connector has a durable stainless steel shell and operates b/w -40°C to 85°C.
3-1734035-2
TE Connectivity 3-1734035-2 USB connector has a temp range of -40 to 85°C. With 5 contacts, it's rated for 1A signal current and offers durability of 1500 cycles. Ideal for telecom/datacom applications with surface mount termination on boards.
74990111211
Wuerth Elektronik & Kg
74990111211 by Wurth Elektronik is a Telecom & Datacom Connector with gold finish, polyethylene insulator, and nickel shell. Featuring 8 contacts in a polarized housing, it is ideal for board mounting applications with a temperature range of -40 to 85°C. This right-angle connector has staggered PCB contact pattern and solder termination for secure connections.
RJMG233022610ER
Amphenol RJMG233022610ER USB connector features gold mating contacts, tin termination finish, and polybutylene terephthalate insulator. Ideal for telecom/datacom applications, it offers a right-angle mounting style on the board with female-to-female contact gender.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved