Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Median Price
$3.619
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$3.068
100+ parts
-
1k+ parts
$2.107
10k+ parts
Mouser Electronics
$5.940
$4.170
$3.800
DigiKey
$6.120
$4.420
$3.757
$3.522
Verical
$3.848
$3.590
Chip1Stop
$3.390
Master Electronics
TTI
$3.280
$3.200
Nova Conductors
$3.639
Electro Sonic
$3.680
$3.250
$3.060
IBS Electronics
$4.460
$4.222
$4.123
NAC Semi
$5.190
$4.800
Vyrian
Rapid Electronics
$4.956
TME
Ampacity Inc.
$2.450
Semicontronic
$2.389
$2.376
Aztec Data Supply Inc.
$2.920
Argo Parts USA
$3.378
Continental Prestige Electronics
$3.310
Gateway Technologies
$3.238
Netroflash
Singapore Electronics
$4.002
$3.721
$3.561
$3.401
Corohmni
$9.902
Perfect Parts
Assy Fe
GreenTree Electronics
Glotronic Ltd.
Eastek
Telecom & Datacom Connectors RJE71-188-1441 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Contact Material:
RJE71-188-1441 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
CRG0805F10K
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
2-1734035-1
TE Connectivity
TE Connectivity's 2-1734035-1 USB connector features GLASS FILLED POLYAMIDE9T insulator, NICKEL shell finish, and 29.92u plating thickness. With a rated current of 1A, it is ideal for telecom applications requiring board mounting with locating post option. Operating temperature ranges from -40 to 85 °C.
2500.0010.0
Molex
TELECOM AND DATACOM CONNECTOR;
NE8FBH-C5-LED
Neutrik Ag
HDRA-E68W2LFDT1EC-SL+
Honda Tsushin Kogyo
HDRA-E68W2LFDT1EC-SL+ by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with nickel shell finish and PPS insulator material. It features female contacts, right-angle mounting style, and solder termination. Ideal for board and panel mounting in applications requiring high UL flammability rating of 94V-0.
PX0443
Bulgin
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
RJHSE-5080-A1
Amphenol
RJE60-188-5401
Amphenol RJE60-188-5401 is a Telecom & Datacom Connector with 8 contacts, rated at 1.25A signal current. It features a dielectric voltage of 1400VAC and insulation resistance of 500MΩ. Ideal for telecom applications requiring right-angle mounting and solder termination.
A00-216-262-450
Edac
TELECOM AND DATACOM CONNECTOR; Contact Material: PHOSPHOR BRONZE; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: GOLD FLASH OVER NICKEL;
43223-6101
Molex 43223-6101 is a telecom & datacom connector with 0.985" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting in applications requiring 12 contacts, female gender, and solder termination. Operating temp range -40 to 80°C with durability of 500 cycles.
61729-0010BLF
Amphenol Communications Solutions
Amphenol's 61729-0010BLF is a USB connector with 4 contacts, rated at 1A signal current. It features a dielectric voltage of 750VAC and insulation resistance of 1000000000 ohm. Ideal for telecom/datacom applications, this durable connector has a shell material of copper alloy and operates b/w -55 to 85°C.
1903815-1
TE Connectivity USB Connector 1903815-1 with POLYETHYLENE insulator, 1A signal current rating, and 1500 cycles durability. Ideal for telecom/datacom applications, featuring right angle mounting style and solder termination for reliable performance in commercial settings.
48037-0001
The Molex 48037-0001 is a USB connector with a body length of 0.472 inch, body width of 0.177 inch, and body depth of 0.74 inch. It is commonly used in telecom and datacom applications due to its high insulation resistance of 1000000000 ohm and dielectric withstand voltage of 500VAC.
2007435-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Total No. of Contacts: 19; Manufacturer Series: 2007435;
12401598E4#2A
Amphenol's 12401598E4#2A USB connector features gold flash termination, polymer insulator, and nickel shell finish. With 24 contacts, it is ideal for telecom & datacom applications requiring surface mount board mounting in a right angle configuration.
104004-0505
Telecom and Datacom Connectors; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: NOT SPECIFIED;
UE86-3G4420-60361
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: UE86-3G4420;
292336-1
TE Connectivity's 292336-1 USB connector features matte tin finish, polyethylene insulator, and copper alloy contacts. With a rated current of 1A, it is ideal for telecom & datacom applications requiring high durability and reliability in temperatures ranging from -55 to 85°C.
78320-0001
Molex 78320-0001 is a telecom & datacom connector with 16 contacts, 0.05" pitch, and 1.364" body length. Ideal for board mounting in applications requiring high insulation resistance of 1000000000 ohm and operating temperatures from -40 to 105°C.
2007562-6
TE Connectivity 2007562-6 is a Telecom & Datacom Connector with 12 ports, 240 contacts, and -55 to 105°C operating temperature range. It features press-fit termination, UL94V-0 flammability rating, and is suitable for board mounting applications in telecom and datacom systems.
ARJE-0025
Abracon
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RJE72-188-1341
RJE73-188-00210
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Total No. of Contacts: 8; UL Flammability Code: 94V-0;
RJE72-188-1411
RJE73-188-00410
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: PHOSPHOR BRONZE; Mating Contact Finish: GOLD (50); JESD-609 Code: e3;
RJE73-188-00441
RJE71-188-1441
RJE72-488-1411
RJE72-188-6411
Amphenol Icc
RJE73-188-00110
RJE72-188-64E2
RJE7248814B1
RJE74-1AA-1410-A
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3; Mating Contact Finish: GOLD (50) OVER NICKEL (50); Contact Material: PHOSPHOR BRONZE; Manufacturer Series: RJE74-1;
RJE74-188-1410-A
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: RJE74-1; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN OVER NICKEL; Mating Contact Finish: GOLD (50) OVER NICKEL (50);
RJE71-188-14K1
RJE71-188-1192
RJE71-188-13A2
RJE71-188-13C2
RJE71-188-1422
RJE71-188-14A1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 85;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved