Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POTENTIOMETER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 85 Cel; Tolerance: 30 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Gateway Technologies
1+ parts
$0.010
100+ parts
1k+ parts
$0.008
10k+ parts
Singapore Electronics
$0.011
$0.009
Variable Resistors PS6KV50-103A3030-06CR-PF attributes and parameters. Explore more Variable Resistors devices from Amphenol
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Technology:
Temperature Coef (ppm/Cel):
Terminal Shape:
Tolerance:
PS6KV50-103A3030-06CR-PF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
4554
Jw Miller Magnetics
Other Semiconductors;
Gec Plessey Semiconductors
PTV111-3415A-B503
Bourns
Bourns PTV111-3415A-B503 is a linear potentiometer with 3 terminals, rated power of 0.05W, and 20% tolerance. It has a max operating temperature of 50°C and min of -10°C. Ideal for applications requiring precise voltage control in compact PCB mount setups.
3296W-1-104LF
Bourns 3296W-1-104LF is a CERMET multi-turn trimmer resistor with 100000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
3296W-1-200LF
Bourns 3296W-1-200LF is a 20 ohm, 25-turn linear cermet trimmer resistor with a tolerance of 10%. Operating voltage of 300V and rated power dissipation of 0.5W. Ideal for applications requiring precise resistance adjustments in electronic circuits.
95C1D-E24-L15L
The Bourns 95C1D-E24-L15L is a linear potentiometer with 10000 ohm resistance, 10% tolerance, and 1W power dissipation. It is used in applications requiring precise resistance adjustment such as audio equipment and industrial controls due to its linear law of resistance and horizontal actuator orientation. With a temperature range from -40°C to 125°C, it offers reliable performance in various environments.
3313J-2-103E
Bourns 3313J-2-103E is a CERMET trimmer resistor with 10000 ohm resistance, 20% tolerance, and 0.125 W power dissipation. It operates b/w -55 to 125 °C and has a linear law of resistance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance.
3314J-1-204E
Bourns 3314J-1-204E is a CERMET trimmer resistor with 200k ohm resistance, 20% tolerance, and 0.25W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 standard compliance and 300V operating voltage capability.
P161G201QSA20A202
Tt Electronics Plc
P161G201QSA20A202 by Tt Electronics Plc is a 2000 ohm POTENTIOMETER with 12 terminals, rated for temperatures b/w -10 to 70 °C. It features CONDUCTIVE PLASTIC technology, AUDIO resistance law, and a PCB Mount package style. Ideal for applications requiring precise resistance adjustments in electronic circuits.
67WR1KLF
67WR1KLF by Tt Electronics Plc is a CERMET variable resistor with 20 turns and linear resistance law. It has a rated power dissipation of 0.5W, operating voltage of 200V, and temperature coefficient of 100 ppm/°C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
P270-SS21R5K
P270-SS21R5K by Tt Electronics Plc is a 5000 ohm linear conductive plastic potentiometer with 3 terminals. It has a rated power dissipation of 2W, operating voltage of 500V, and can withstand temperatures from -55 to 120 °C. Ideal for panel mount applications requiring precise resistance adjustments in electronic circuits.
M63M202KB30T607
Vishay Intertechnology
Vishay Intertechnology's M63M202KB30T607 is a CERMET TRIMMER resistor with linear resistance law, 10% tolerance, and 270° rotation angle. Ideal for PCB mounting applications requiring a 0.5 W power dissipation at temperatures ranging from -55 to 125 °C.
3006P-1-503LF
The Bourns 3006P-1-503LF is a CERMET trimmer pot with 15 turns and linear resistance law. It has a resistance of 50k ohm, rated power of 0.75W, and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
M43P501KB40
Vishay Intertechnology's M43P501KB40 is a 500 ohm linear trimmer resistor with 15 turns and 10% tolerance. Operating voltage of 19.4 V, rated power dissipation of 0.75 W, and temperature coefficient of 100 ppm/°C make it ideal for PCB mount applications requiring precise resistance adjustments in a wide temperature range from -55 to 125 °C.
RRS250
Ohmite Manufacturing
The Ohmite RRS250 is a 500W wire wound potentiometer with a linear resistance law. It has a horizontal orientation and is panel mountable, making it suitable for chassis mounting applications. With a 325° angle of rotation, it offers precise control over resistance in various electronic systems.
3224J-1-502E
Bourns 3224J-1-502E is a linear trimmer pot with 12 turns, 5000 ohm resistance, and 10% tolerance. It is a surface mount variable resistor suitable for applications requiring precise resistance adjustments in compact electronic devices. With a temperature coefficient of 100 ppm/°C, it operates b/w -65 to 150 °C temperatures.
25VR100LF
25VR100LF by Tt Electronics Plc is a CERMET variable resistor with 100 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting in applications requiring precise resistance adjustments.
P161G201QSC20A102
P161G201QSC20A102 by Tt Electronics Plc is a 1000 ohm potentiometer with 12 terminals, rated for temperatures b/w -10 to 70 °C. Featuring conductive plastic technology and an audio law of resistance, it is ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
M64Z202KB40
Vishay Intertechnology's M64Z202KB40 is a CERMET variable resistor with 21 turns, linear resistance law, and 10% tolerance. It operates b/w -55 to 155 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
TC73W-1-103E
Bourns TC73W-1-103E is a 10000 ohm linear trimmer resistor with 20 turns, rated for temperatures b/w -25 to 85 °C. Ideal for SMT applications, featuring a screw actuator and 30% tolerance, suitable for various electronic circuit adjustments.
91A1A-B28-B13L
Bourns 91A1A-B28-B13L is a linear conductive plastic potentiometer with 5000 ohm resistance, suitable for panel mount applications. It has a rated power dissipation of 1W, operates b/w -40 to 125°C temperatures, and offers a tolerance of 20%. Ideal for precise control in various electronic devices.
25SR20KLF
25SR20KLF by Tt Electronics Plc is a CERMET variable resistor with a resistance of 20000 ohm, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance and is ideal for PCB mounting applications requiring precise voltage adjustments up to 300 V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Amphenol
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved