Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol M39012553028 SSMA Connector has 50 ohm impedance, 1400VAC dielectric voltage, and 12.4 GHz operating frequency. Ideal for RF applications with RG-142 cable type, it offers durability of 500 cycles and MIL-C-39012 reliability.
Median Price
$28.980
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$23.675
100+ parts
$17.868
1k+ parts
$17.537
10k+ parts
-
PEI Genesis
$24.720
$22.450
Interstate Connecting
$26.296
$19.610
Newark
$28.860
$25.970
$24.120
TTI
$24.480
$24.230
Master Electronics
$29.100
$19.030
$17.350
Mouser Electronics
$30.490
$25.230
$24.280
Verical
$32.309
$30.080
DigiKey
$35.940
$25.968
$24.034
BTC Electronics
Arrow
$30.740
$28.730
$27.360
Freelance Electronics
$12.200
Digiode
$13.804
Vyrian
$14.530
Bristol Electronics
$15.600
$13.728
Electro Enterprises
$17.378
$14.241
$14.045
Voyager Components
$20.475
Component Electronics Inc.
$23.080
$17.310
$15.000
IBS Electronics
$40.813
$26.690
$24.333
Microwave Components, LLC
American Connector Supply Corp
Nova Conductors
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Kallista Electronics Ltd
EMSNET
Electronics Depot
Electronic Expediters
DF Sales Co.
Van Brakel Electronic
Bisco
R&J Components
Ampacity Inc.
$12.350
Semicontronic
$12.041
$11.980
Corphita
$13.077
Gateway Technologies
$32.370
$28.809
Advanced Electronics
Corohmni
Singapore Electronics
$35.606
$33.113
$31.689
$30.265
Continental Prestige Electronics
Authorized Procurement Solutions
Aranea Global
Argo Parts USA
GreenTree Electronics
The compact body diameter allows for easy installation in tight spaces or densely packed configurations.
High insulation resistance ensures minimal signal loss and interference, resulting in reliable and stable connections.
Withstanding high voltages ensures safe operation and protection against electrical breakdown.
RF SMA connectors are commonly used in high-frequency applications, making this product suitable for various RF communication systems.
With a high maximum operating frequency, this product is ideal for high-speed data transmission and communication in demanding applications.
The high durability of 500 cycles ensures long-lasting performance and reliable connections even with frequent mating and unmating.
SSMA Connectors M39012553028 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Body Depth:
Body Diameter:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
MIL Conformity:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
M39012553028 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
5935-00-325-9392, 5935003259392, 5935-00-534-4497, 5935005344497
NIIN
003259392, 005344497
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Silicon Standard
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Synsemi
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
Grande Electronics
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
National Semiconductor
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
LM358N
Intersil
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
R125.172.000W
Radiall S A
R125.172.000W by Radiall S A is a SSMA connector with a body length of 0.25 inch, insulation resistance of 5G ohm, and insertion loss of 0.528 dB. It is commonly used in RF SMA connectors for applications requiring a durable, threaded coupling type with a characteristic impedance of 50 ohm and max operating frequency of 12.4 GHz.
5691
Carlisle Interconnect Technologies
5691 RF SMA Connector by Carlisle IT features a 50 ohm impedance, gold over nickel termination finish, and PTFE insulator material. Ideal for commercial applications, this panel-mount connector offers durability with 500 cycles and operates up to 18 GHz frequency range.
901-9870
Amphenol
Amphenol 901-9870 is an RF SMA connector with 0.25 dB insertion loss, 1400VAC dielectric voltage, and gold termination. Ideal for RG-58A/U cables in commercial applications, it operates b/w -65 to 165 °C with a max frequency of 12.4 GHz.
1051665-1
TE Connectivity
TE Connectivity's 1051665-1 SSMA Connector features 1.5" body length, 0.06 dB insertion loss, and TFE insulator material. Ideal for RF applications with RG 174 cable type, this threaded connector has a max operating frequency of 12.4 GHz and operates b/w -65 to 165 °C.
R125464274
The Radiall S A R125464274 is an RF SMA Connector with a threaded coupling type and gold termination contact finish. It features a low insertion loss of 0.18 dB and a VSWR of 1.12, making it ideal for applications requiring high-frequency performance up to 18 GHz in industries such as telecommunications and aerospace.
142-0701-851
Bel Fuse
The Bel Fuse 142-0701-851 SSMA Connector features a body length of 0.375", insulation resistance of 5G ohm, and dielectric voltage of 1400VAC. Ideal for RF applications up to 18GHz, this female connector with brass shell is designed for surface mount on boards, offering durability with 500 cycles.
R125.076.001
Radiall S A R125.076.001 is an RF SMA connector with 50 ohm impedance, 0.21 dB insertion loss, and 1.27 VSWR. It features gold over nickel termination for crimp applications up to 12.4 GHz in cable assemblies requiring threaded coupling for high-frequency signal transmission.
5032
Connecting Devices
RF SMA CONNECTOR; Contact Gender: FEMALE; JESD-609 Code: e4; Mating Contact Finish: GOLD (50); Panel Mount: YES; Termination Contact Finish: GOLD (50);
1052409-1
TE Connectivity's 1052409-1 SSMA Connector features threaded coupling, 0.528" body depth, and PTFE insulator. Ideal for RF applications up to 18 GHz with 50 ohm impedance. Suitable for board and panel mounting in commercial settings.
11_SMA-50-2-15/111_NH
Huber+suhner Ag
11_SMA-50-2-15/111_NH by Huber+suhner Ag is an RF SMA connector with a characteristic impedance of 50 ohm. It features gold-plated beryllium copper contacts, threaded coupling type, and can operate b/w -65 to 165 °C. Ideal for commercial applications requiring durability with a max frequency of 18 GHz.
142-0701-871
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; Shell Material: BRASS; Minimum Operating Temperature: -65 Cel;
SF2912-60955
Sv Microwave
RF SMA/SSMA Connectors;
901-9602-3
Amphenol's 901-9602-3 is an RF SMA connector with a threaded coupling type and a characteristic impedance of 50 ohm. It has a max operating frequency of 12.4 GHz and is commonly used in cable applications for its low insertion loss (0.11 dB) and gold termination contact finish.
142-1701-206
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; MIL Conformity: NO; Additional Features: STANDARD: MIL-C-39012;
132108
Amphenol 132108 is an RF SMA Connector with threaded coupling, gold finish, and 50 ohm impedance. It features a low insertion loss of 0.14 dB and VSWR of 1.14 up to 18 GHz. Ideal for panel mount applications requiring high-frequency signal transmission with MIL conformity and PTFE insulator material.
1340153
Phoenix Contact
RF SMA CONNECTOR;
M39012/55-3009
TE Connectivity's M39012/55-3009 is a threaded RF SMA connector with a 50 ohm characteristic impedance. It has a max operating frequency of 12.4 GHz and can be used with cable types RG 58, RG 142, and RG 223. Ideal for applications requiring high insulation resistance and low insertion loss.
142-0711-201
Ef Johnson
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Mating Contact Finish: GOLD (30); Coupling Type: THREADED;
SMA-J-P-H-ST-EM3
Samtec
SMA-J-P-H-ST-EM3 by Samtec is a RF SMA connector with gold finish, threaded coupling, and 18 GHz operating frequency. Ideal for commercial applications requiring reliable surface mount female connectors on boards.
R125.175.000
R125.175.000 by Radiall S A is an RF SMA connector with a 50 ohm impedance and gold termination for low insertion loss of 0.53 dB. Ideal for applications up to 12.4 GHz, it features a threaded coupling type and right-angle mounting style, making it suitable for high-frequency cable connections requiring precise signal transmission.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Kings Electronics
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: THREADED; Termination Contact Finish: GOLD; Filter Feature: NO;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER; Contact Material: BERYLLIUM COPPER/COPPER ALLOY;
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Manufacturer Series: SMA; Coupling Type: THREADED;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Termination Contact Finish: GOLD; Characteristic Impedance: 75 ohm;
M39012/94-3003
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE;
Winchester Interconnect
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: M39012/94; Mating Contact Finish: NOT SPECIFIED; Insulator Material: POLYTETRAFLUOROETHYLENE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Termination Type: SOLDER; Additional Features: STANDARD: MIL-C-39012;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO; Coupling Type: THREADED;
M39012/26-0101
RF TNC CONNECTOR; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Body Depth: 1.108 inch; Body Diameter: .625 inch; Mounting Style: STRAIGHT;
M39012/57-3029
RF SMA CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 1; Minimum Operating Temperature: -65 Cel; Coupling Type: THREADED;
RF SMA CONNECTOR; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1400VAC; Total No. of Contacts: 1; Insulation Resistance: 5000000000 ohm; Mounting Type: CABLE;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: SMA; Body or Shell Style: JACK; Filter Feature: NO;
M39012/93-3001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: THREADED; Panel Mount: NO; Characteristic Impedance: 50 ohm;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: STANDARD: MIL-C-39012; Mounting Type: BOARD; Mounting Style: STRAIGHT;
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Termination Type: SOLDER; Mounting Style: STRAIGHT;
M39012/80B3101
RF SMA CONNECTOR; Reliability: MIL-G-45204; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Mounting Style: RIGHT ANGLE; Minimum Operating Temperature: -65 Cel;
TE Connectivity's M39012/80B3101 is a threaded RF SMA connector with a body length of 0.68 inch and depth of 0.666 inch. It has an insulation resistance of 5G ohm, operates at temperatures ranging from -65 to 165 °C, and is commonly used in MIL-C-39012 applications.
M39012/55-3030
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: SMA; Additional Features: STANDARD: MIL-C-39012; DIN Conformance: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved