Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's M39012/16-0013 BNC Connector features 0.563" body diameter, 1.09" body depth, and 0.2 dB insertion loss. Ideal for RF applications up to 4 GHz with MIL conformity, bayonet coupling, and 50 ohm impedance. Compatible with RG-58/U and RG-141/U cables for crimp termination in male plug configuration.
Median Price
$11.250
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
PEI Genesis
1+ parts
$8.620
100+ parts
-
1k+ parts
10k+ parts
Powell Electronics
$10.160
$9.030
AE Petsche
TTI
$11.600
$9.440
$9.330
Mouser Electronics
$18.630
$10.080
$9.210
Heilind Electronics
$85.250
Interstate Connecting
Verical
$7.031
BTC Electronics
Master Electronics
$9.510
$8.070
Freelance Electronics
$5.798
DF Sales Co.
$6.040
Nova Conductors
$6.293
Bristol Electronics
$9.600
Vyrian
Electro Enterprises
IBS Electronics
$12.174
$11.318
American Connector Supply Corp
Electronic Expediters
R&J Components
Kallista Electronics Ltd
FDH Electronics
Prism Electronics
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Van Brakel Electronic
MISTER SPROCKETS
Electronics Depot
Elcom Components
Resion
LWI Electronics Inc
Extreme Components
EMSNET
Beltway Electronics Company
Mil-Aero Solutions, Inc.
Corel Iberica Componentes, S.L.
Microwave Components, LLC
Sunrise Surplus Inc.
Semicontronic
$5.670
$5.528
$5.500
Corohmni
$5.910
Continental Prestige Electronics
$5.950
$5.831
Gateway Technologies
$6.005
$5.344
Advanced Electronics
$6.125
Bastille Electronics
$5.978
$5.679
$5.601
Singapore Electronics
$6.605
$6.142
$5.878
$5.614
Aztec Data Supply Inc.
$8.467
Glotronic Ltd.
Argo Parts USA
Perfect Parts
The compact body diameter allows for easy installation in tight spaces without sacrificing performance.
Low insertion loss ensures that signal strength is preserved during transmission, resulting in clear and reliable data transfer.
The deeper body depth provides secure connectivity and stability in high-vibration environments.
Compliance with MIL standards ensures reliability and quality, making it suitable for military and aerospace applications.
Bayonet coupling allows for quick and reliable connections, ideal for applications where frequent mating and unmating is required.
The use of PTFE insulator provides excellent insulation properties and ensures stable signal transmission.
RF BNC connector is widely used in telecommunications and broadcasting industries for its versatility and compatibility with various types of equipment.
A low VSWR of 1.3 indicates minimal signal reflections and efficient power transfer, leading to optimal performance.
Meeting MIL standards ensures that the connector is designed and manufactured to withstand harsh environmental conditions and rigorous testing.
The cable mounting type simplifies installation and allows for flexible placement in different configurations.
50 ohm characteristic impedance is a standard in RF applications, providing compatibility with a wide range of devices and equipment.
Support for multiple cable types ensures versatility and compatibility with various system requirements.
Crimp termination offers a secure and reliable connection method, suitable for high-vibration environments and rugged applications.
Male contact gender is commonly used in electronic applications and provides a stable and secure connection.
Plug style design ensures easy installation and removal, making it convenient for maintenance and upgrades.
Straight mounting style allows for a direct and streamlined connection, ideal for applications where space is limited or a specific routing is required.
With a maximum operating frequency of 4 GHz, this connector is suitable for high-frequency RF applications and ensures reliable signal transmission.
BNC Connectors M39012/16-0013 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Additional Features:
Body Depth:
Body Diameter:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reference Standard:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
M39012/16-0013 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Crystalonics
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
BNC7T-P-C-GN-ST-CA3
Samtec
Samtec BNC7T-P-C-GN-ST-CA3 is a RF BNC connector with bayonet coupling, gold over nickel termination, and brass contact material. Ideal for 4 GHz applications with 75 ohm impedance, it features a VSWR of 1.3 and male gender plug suitable for cable mounting using crimp solder termination.
73171-0700
Molex
The Molex 73171-0700 RF BNC Connector features a body length of 0.577", insertion loss of 0.12 dB, and dielectric voltage withstand of 2100VAC. Ideal for applications requiring a durable right-angle receptacle with 75 ohm impedance, such as commercial-grade RF connections up to 4 GHz frequency.
1-1478402-0
TE Connectivity
TE Connectivity 1-1478402-0 is a BNC Connector with PTFE insulator, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications, it features bayonet coupling, solder termination, and brass shell material for commercial reliability.
TC-400-BM-X
Times Microwave Systems
RF BNC CONNECTOR;
456E-717
Amphenol
The Amphenol 456E-717 is a BNC connector with panel mount and filter feature. It has termination contact finish in TIN, mating contact finish in gold over nickel, and phosphor bronze contact material. Ideal for RF applications requiring female right angle mounting on board or panel.
B1141A1-ND3G-3-75
Amphenol B1141A1-ND3G-3-75 is a RF BNC connector with gold over nickel finish. It features bayonet coupling, male contact gender, and cable mounting for crimp clamp termination. Ideal for applications requiring reliable signal transmission in straight plug configurations.
1-1478035-0
TE Connectivity's 1-1478035-0 RF BNC Connector features a body length of 0.732", insulation resistance of 5000000000 ohm, and termination contact finish in silver. Ideal for board mounting applications, this connector has a characteristic impedance of 50 ohm and operates at temperatures ranging from -65 to 165 °C, making it suitable for commercial use up to 4 GHz frequencies.
112253
Amphenol 112253 is a BNC Connector with gold termination, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, RG-179 cable compatibility, and female contact gender. Suitable for commercial use in panel or cable mounting configurations.
M39012/16-0015
Amphenol's M39012/16-0015 BNC Connector features low 0.2 dB insertion loss, MIL conformity, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has bayonet coupling and PTFE insulator for reliable performance in cable installations.
112132
Amphenol 112132 is a RF BNC connector with gold termination, bayonet coupling, and acetal insulator. Ideal for RG-174/U cable with 50 ohm impedance, it's commonly used in commercial applications requiring reliable coax connections.
31-5539
Amphenol 31-5539 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications, it has a bayonet coupling type and gold mating contact finish for reliable connections in board and panel mounting setups.
034-1021
Amphenol 034-1021 BNC Connector features gold termination, bayonet coupling, and 75 ohm impedance. Ideal for RF applications up to 6 GHz frequency on board mounting with solder termination for female contacts.
R141.426.161
Radiall S A
Radiall S A's R141.426.161 BNC Connector features 50 ohm impedance, 0.03 dB insertion loss, and 1.08 VSWR for RF applications up to 1.5 GHz. With a durable design rated for 100 cycles, this connector is ideal for commercial use in boards requiring a straight receptacle with solder termination.
R142016000
R142016000 by Radiall S A is a RF BNC connector with 75 ohm impedance and 1.5 GHz operating frequency, featuring 0.2 dB insertion loss and 1.3 VSWR. Ideal for applications requiring MIL and IEC conformity, it has a bayonet coupling type, gold termination finish, PTFE insulator, male contact gender, and plug body style for cable mounting.
112133
Amphenol 112133 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. It is used for RF applications with 75 ohm impedance, RG-179/U cable type, and operates up to 1 GHz frequency. Ideal for commercial use due to its reliability and male contact gender.
M39012/16-0503
Winchester Interconnect
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-39012; Contact Gender: MALE; Body or Shell Style: PLUG; JESD-609 Code: e4;
227699-2
TE Connectivity's 227699-2 BNC Connector features 50 ohm impedance, tin termination, and glass-filled polybutylene terephthalate insulator. Ideal for RF applications up to 4 GHz with a durability of 500 cycles. Suitable for commercial use in board mounting configurations.
2-329458-1
TE Connectivity's 2-329458-1 is a BNC connector with MIL conformity and bayonet coupling type. It has a max operating temperature of 85°C and min operating temperature of -55°C. This RF connector, made of brass shell material, is suitable for applications requiring a characteristic impedance of 50 ohm and can be used with cable types RG 187, RG 179, and RG 161.
R141018000
Radiall S A's R141018000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has a bayonet coupling type and gold-plated contacts with nickel barrier for reliable signal transmission in cable installations.
2507
Ddk
RF BNC CONNECTOR; Contact Gender: FEMALE; Filter Feature: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; DIN Conformance: NO; Characteristic Impedance: 50 ohm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M39012/16-0101
Kings Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Insulator Material: POLYTETRAFLUOROETHYLENE; Insertion Loss: .2 dB;
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-39012; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Shell Material: BRASS;
Automatic Connector
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Insertion Loss: .2 dB; Filter Feature: NO;
TE Connectivity's M39012/16-0101 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications, it has bayonet coupling, PTFE insulator, and solder termination for male contacts on cables.
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Type: CLAMP SOLDER; Filter Feature: NO;
Delta Electronics Manufacturing
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Coupling Type: BAYONET; Termination Type: CLAMP;
Defense Logistics Agency
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Poles: 1; Contact Style: COAX; DIN Conformance: NO;
M39012/24-0001
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Additional Features: STANDARD: MIL-PRF-39012, CAPTIVE CONTACT; Body or Shell Style: RECEPTACLE;
Amphenol's M39012/24-0001 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications, it is MIL conformant with a bayonet coupling type and polytetrafluoroethylene insulator. Suitable for panel mounting, it has a hermetic option and operates b/w -65 to 165 °C.
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; MIL Conformity: YES; Body or Shell Style: RECEPTACLE; DIN Conformance: NO;
M39012/24-0002
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-PRF-39012, CAPTIVE CONTACT; Body or Shell Style: RECEPTACLE; DIN Conformance: NO;
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Maximum Operating Frequency: 4 GHz; Manufacturer Series: BNC; Insulator Material: POLYTETRAFLUOROETHYLENE;
Amphenol's M39012/24-0002 BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this hermetic connector is panel mountable with bayonet coupling for secure connections in military and aerospace systems.
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Body or Shell Style: RECEPTACLE; Coupling Type: BAYONET;
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; MIL Conformity: YES; IEC Conformity: NO; Termination Contact Finish: GOLD;
M39012/20-0007
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: RIGHT ANGLE; Manufacturer Series: M39012/20-0007;
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Coupling Type: BAYONET; Additional Features: STANDARD: MIL-PRF-39012, APPLICABLE CABLES: RG 142, RG 223, RG 303, RG 400, CAPTIVE CONTACT;
The Winchester Interconnect M39012/20-0007 is a BNC connector with 0.57" body diameter, 0.3 dB insertion loss, and gold termination. Ideal for RF applications up to 4 GHz, it features a bayonet coupling type and PTFE insulator material. Suitable for RG-55 cables, this connector has a 50 ohm impedance and silver shell finish.
M39012/20-0101
Winchester Interconnect's M39012/20-0101 BNC Connector features 0.3 dB insertion loss, gold termination contact finish, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this bayonet-coupling connector with PTFE insulator is MIL compliant. It has a VSWR of 1.35 and uses clamp solder termination on cables.
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; DIN Conformance: NO; Additional Features: STANDARD: MIL-PRF-39012, APPLICABLE CABLES: RG 58, RG 179, RG 303, CAPTIVE CONTACT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved