Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Frequency: 4 GHz; Insulator Material: POLYTETRAFLUOROETHYLENE; Insertion Loss: .2 dB;
Median Price
$25.556
Lifecycle Status
Suppliers In-Stock
44
In-Stock Inventory
1k+
AE Petsche
1+ parts
$17.800
100+ parts
-
1k+ parts
10k+ parts
PEI Genesis
$18.400
$16.920
Heilind Electronics
$20.725
$15.642
$15.352
Powell Electronics
$20.920
$19.250
$16.990
Interstate Connecting
$25.796
$19.237
Farnell
$33.090
$23.900
Pasternack Enterprises
$33.590
$28.890
DigiKey
$42.600
$30.779
$28.854
Mouser Electronics
$46.140
$35.900
Verical
$25.316
March Electronics
Freelance Electronics
$5.798
Digiode
$13.737
Component Electronics Inc.
$15.380
$11.540
$10.000
FDH Electronics
$20.236
$16.368
$15.247
Nova Conductors
$22.520
Voyager Components
$27.639
IBS Electronics
$34.011
$24.810
$22.664
DF Sales Co.
$70.000
Vyrian
American Connector Supply Corp
Bisco
Kallista Electronics Ltd
Eastern End Electronics, LLC
Electronics Depot
Bristol Electronics
Microwave Components, LLC
EPE Components Inc.
Resion
EMSNET
MISTER SPROCKETS
LWI Electronics Inc
Q Components
Inland Empire Components Inc.
R&J Components
Sunrise Surplus Inc.
Lantek
Electronic Expediters
Prism Electronics
PAR Electronics
Technoshack Inc.
Odi Ramu Company
Van Brakel Electronic
Corohmni
$5.252
Advanced Electronics
$7.897
$7.502
Aztec Data Supply Inc.
$9.446
Gateway Technologies
$11.870
$10.564
Continental Prestige Electronics
$12.648
$12.395
Corphita
$13.014
Singapore Electronics
$13.056
$12.142
$11.619
$11.097
Argo Parts USA
Bastille Electronics
BNC Connectors M39012/16-0101 attributes and parameters. Explore more BNC Connectors devices from Kings Electronics
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
M39012/16-0101 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Kings Electronics - Winchester Company Overview Kings Electronics was founded in Rock Hill, South Carolina in 1947 and is today a long-trusted leader in RF coaxial connector design and manufacturing. Over the years, Kings Electronics has made many contributions to the advancement of connector technology, including several forms of K-Grip crimp design connectors, True 75 Ohm BNC connectors, HDTV video jacks and jackfields and the industry standard Tri-Loc connector series. Kings connectors are specified in numerous high-reliability programs including the NIM (Nuclear Instrumentation Module) and TCAS (Traffic Alert and Collision Avoidance) systems. Kings Electronics was acquired by Winchester Electronics in August, 2012. Kings Electronics - Winchester Products The types of products manufactured by Kings Electronics - Winchester include Plugs, Jacks, Receptacles and Accessories, Video Jacks and Jackfields, AES Micro-miniature Systems, Tri-Loc(R) Series Triaxial Connectors, Patch Plugs, Jacks and Patch Assemblies, Termination (Crimp & Strip) Tools & Die Sets, and Custom Cable Assemblies.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Diotec Electronics
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Good-ark Electronics
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
UG-89/U
Amphenol Communications Solutions
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-C-39012, APPLICABLE CABLES: RG-55/U; RG-58/U; MIL Conformity: YES; Filter Feature: NO;
31-5
Amphenol
The Amphenol 31-5 BNC Connector features low insertion loss of 0.2 dB and high voltage standing wave ratio of 1.3, ideal for RF applications up to 4 GHz. With bayonet coupling and silver termination, this hermetic connector is designed for a characteristic impedance of 50 ohm in straight cable mounting configurations.
5227161-6
TE Connectivity's 5227161-6 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications, this connector has a characteristic impedance of 50 ohm, operates up to 4GHz, and offers durability with 500 cycles.
R141.009.000
Radiall S A
R141.009.000 BNC Connector by Radiall S A is a male plug with a 50 ohm characteristic impedance, suitable for RG-141 cables. It has an insulation resistance of 5GΩ, insertion loss of 0.23 dB, and can withstand voltages up to 1500VAC. This connector is commonly used in RF applications up to 4 GHz.
112803
Amphenol 112803 is a BNC connector with gold termination, PTFE insulator, and nickel shell. It has a VSWR of 1.15, impedance of 75 ohm, and operates up to 3 GHz. Ideal for RF applications requiring reliable commercial-grade connectors with straight mounting and locking option.
13-22
Multicomp Pro
13-22 BNC Connector by Multicomp Pro features a gold termination finish, bayonet coupling type, and polytetrafluoroethylene insulator. Ideal for RF applications with a characteristic impedance of 50 ohm and max operating frequency of 11 GHz. Suitable for commercial use in panel-mounted configurations.
R142.334.700
The Radiall S A R142.334.700 BNC Connector features 0.24 dB insertion loss, 1.08 VSWR, and 75 ohm impedance. Ideal for RF applications up to 6 GHz, it is a panel mount connector with bayonet coupling and PTFE insulator suitable for cable and panel mounting in female jack configuration.
HDBNC-P-C-GN-ST-CA6
Samtec
The Samtec HDBNC-P-C-GN-ST-CA6 is a RF BNC connector with 75 ohm impedance, suitable for RG-6 cables. Featuring gold termination finish and bayonet coupling, it operates up to 12 GHz. Ideal for commercial applications requiring reliable signal transmission in high-frequency environments.
2-221128-7
TE Connectivity's 2-221128-7 BNC Connector features 0.2 dB Insertion Loss, 50 ohm Impedance, and 4 GHz Max Frequency. Ideal for RF applications, it has a Bayonet Coupling Type and Polyethylene Insulator Material. Suitable for cables like Belden 89907 and RG 141, with Crimp Termination and Nickel Shell Finish.
B705000-NPB3G-50
Amphenol B705000-NPB3G-50 is a BNC connector with panel mount, bayonet coupling, and gold flash mating contact finish. It has polypropylene insulator, zinc alloy shell, and solder termination for RF applications. Ideal for board and panel mounting in commercial settings due to UL reference standard compliance.
UG.89/U
Radiall S A's UG.89/U BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 11 GHz max operating frequency. Ideal for RF applications requiring MIL conformity with bayonet coupling and PTFE insulator material.
031-70338
Amphenol 031-70338 BNC Connector has Dielectric Voltage of 1050VAC, Body Depth 0.878", and VSWR of 1.5. Ideal for RF applications with RG-59/U cables, it's a right-angle plug connector with crimp termination suitable for up to 1GHz frequency in commercial settings.
2540
Ddk
2540 by Ddk is a BNC Connector with Bayonet coupling, PTFE insulator, and RF BNC connector type. It has a VSWR of 1.3, 50 ohm impedance, and male contact gender. Ideal for cable mounting applications requiring a straight plug with clamp termination.
1-5225398-5
TE Connectivity 1-5225398-5 is a BNC Connector with 0.572" body diameter, 0.2 dB insertion loss, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features SNAP coupling, PTFE insulator, and nickel finish.
5227222-3
Tyco Electronics Amp
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mounting Type: BOARD AND PANEL; Body or Shell Style: JACK;
208101-8
TE Connectivity's 208101-8 is a BNC connector with bayonet coupling, male contact gender, and panel mounting. It has a mains connector rating of 115/230VAC. Ideal for RF applications requiring a straight mounting style with #4-40 UNC 2B screw option.
31-5637
Asc Capacitors
RF BNC CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO; Mounting Type: BOARD AND PANEL;
R141665161W
R141665161W by Radiall S A is a BNC Connector with Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 1.5 GHz, it features a female contact gender, solder termination, and right-angle mounting on boards. Operating temperatures range from -35°C to 70°C.
7233
Pomona Electronics
The Pomona Electronics 7233 BNC Connector features gold termination, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, 3 GHz frequency, and male contact gender. Suitable for cable mounting with crimp termination for low VSWR of 1.1.
5413879-1
TE Connectivity's 5413879-1 BNC Connector features a body diameter of 0.436", insertion loss of 0.3 dB, and insulation resistance of 5G ohm. Ideal for RF applications, this connector has a characteristic impedance of 50 ohm and operates up to 4 GHz with durability for 500 cycles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M39012/16-0101
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: MIL-C-39012; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2100VAC; Shell Material: BRASS;
Automatic Connector
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Insertion Loss: .2 dB; Filter Feature: NO;
TE Connectivity's M39012/16-0101 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications, it has bayonet coupling, PTFE insulator, and solder termination for male contacts on cables.
Winchester Interconnect
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Type: CLAMP SOLDER; Filter Feature: NO;
Delta Electronics Manufacturing
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Coupling Type: BAYONET; Termination Type: CLAMP;
Defense Logistics Agency
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Poles: 1; Contact Style: COAX; DIN Conformance: NO;
M39012/24-0001
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Additional Features: STANDARD: MIL-PRF-39012, CAPTIVE CONTACT; Body or Shell Style: RECEPTACLE;
Amphenol's M39012/24-0001 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications, it is MIL conformant with a bayonet coupling type and polytetrafluoroethylene insulator. Suitable for panel mounting, it has a hermetic option and operates b/w -65 to 165 °C.
Kings Electronics
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; MIL Conformity: YES; Body or Shell Style: RECEPTACLE; DIN Conformance: NO;
M39012/24-0002
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-PRF-39012, CAPTIVE CONTACT; Body or Shell Style: RECEPTACLE; DIN Conformance: NO;
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; Maximum Operating Frequency: 4 GHz; Manufacturer Series: BNC; Insulator Material: POLYTETRAFLUOROETHYLENE;
Amphenol's M39012/24-0002 BNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this hermetic connector is panel mountable with bayonet coupling for secure connections in military and aerospace systems.
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Body or Shell Style: RECEPTACLE; Coupling Type: BAYONET;
RF BNC CONNECTOR; Option: HERMETIC; Contact Gender: FEMALE; MIL Conformity: YES; IEC Conformity: NO; Termination Contact Finish: GOLD;
M39012/20-0007
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: RIGHT ANGLE; Manufacturer Series: M39012/20-0007;
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Coupling Type: BAYONET; Additional Features: STANDARD: MIL-PRF-39012, APPLICABLE CABLES: RG 142, RG 223, RG 303, RG 400, CAPTIVE CONTACT;
The Winchester Interconnect M39012/20-0007 is a BNC connector with 0.57" body diameter, 0.3 dB insertion loss, and gold termination. Ideal for RF applications up to 4 GHz, it features a bayonet coupling type and PTFE insulator material. Suitable for RG-55 cables, this connector has a 50 ohm impedance and silver shell finish.
M39012/20-0101
Winchester Interconnect's M39012/20-0101 BNC Connector features 0.3 dB insertion loss, gold termination contact finish, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this bayonet-coupling connector with PTFE insulator is MIL compliant. It has a VSWR of 1.35 and uses clamp solder termination on cables.
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; DIN Conformance: NO; Additional Features: STANDARD: MIL-PRF-39012, APPLICABLE CABLES: RG 58, RG 179, RG 303, CAPTIVE CONTACT;
M39012/16-0020
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD; JESD-609 Code: e4; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved