Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Power Connectors;
Median Price
$2.697
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$1.523
100+ parts
-
1k+ parts
10k+ parts
Farnell
$2.440
$1.810
$1.570
Mouser Electronics
$3.170
$2.180
$1.870
$1.670
DigiKey
$3.180
$2.410
$1.951
$1.824
Newark
$3.400
$2.720
$2.010
Element14
$4.400
$3.330
$2.700
Master Electronics
$1.450
TTI
$1.760
$1.730
$1.660
Future Electronics
$1.620
$1.550
Waytek Inc.
$2.286
$2.070
Verical
$2.954
Powell Electronics
$3.730
$2.630
VNN
IBS Electronics
$2.188
$2.090
Electro Sonic
$1.590
$1.560
NAC Semi
$2.980
Vyrian
Nova Conductors
Corohmni
$2.903
Continental Prestige Electronics
$4.910
$2.940
Gateway Technologies
$5.000
$4.450
Singapore Electronics
$5.500
$5.115
$4.895
$4.674
Aztec Data Supply Inc.
$6.983
Perfect Parts
Argo Parts USA
EMSNET (Excess)
Aranea Global
Authorized Procurement Solutions
ATHD06-1-4S Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LL4148-GS08
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
Toshiba
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Laube Technology
General Semiconductor
43650-0325
Molex
The Molex 43650-0325 is a rectangular power connector with 3 contacts, male gender, and surface mount termination. It features insulation resistance of 1Gohm, operating temperature range from -40 to 105°C, and durability of 30 cycles. Ideal for commercial applications requiring reliable power connections on boards.
1729520601
Molex 1729520601 is a RECTANGULAR POWER CONNECTOR with 6 contacts, 0.4" width, and 0.551" depth. Made of POLYAMIDE, it operates b/w -40 to 105°C. Ideal for cable mounting applications due to its FEMALE crimp termination and RECEPTACLE body style.
19-09-1049
The Molex 19-09-1049 is a rectangular power connector with 4 contacts, rated at 12A signal current. It features a mating contact pitch of 0.264", dielectric voltage of 5000VAC, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring reliable power connections in harsh environments.
15-24-6140
The Molex 15-24-6140 is a rectangular power connector with 14 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with polarization key and locking options.
03-06-2031
Molex 03-06-2031 is a rectangular power connector with 0.145" mating contact pitch, suitable for commercial applications. Featuring 2100VAC dielectric voltage, it has a rated current of 5A and operates b/w -40 to 105°C. Ideal for panel mounting, this male connector offers reliable performance with a polarization key and crimp termination.
39-01-4030
Molex 39-01-4030 is a rectangular power connector with 3 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. It has a 0.54" body length, 0.29" width, and 0.81" depth. Ideal for commercial applications requiring reliable crimp termination in temperatures ranging from -40 to 105°C.
1-794617-2
TE Connectivity
TE Connectivity 1-794617-2 is a Power Connector with 0.118" contact pitch, rated for 250V and 5A signal current. Featuring POLYAMIDE66 insulator, it has a temperature range of -40 to 105°C. Ideal for commercial applications requiring reliable power connections.
1-350344-0
TE Connectivity 1-350344-0 is a rectangular power connector with POLYAMIDE insulator. It has 0.95"x.275"x.815" dimensions, operates b/w -55 to 105°C, and UL 94V-2 flammability rating. Ideal for cable mounting applications requiring crimp termination and accommodating 115/230VAC mains connectors.
43650-1102
The Molex 43650-1102 is a rectangular power connector with 11 contacts, featuring a mating contact pitch of 0.118" and body width of 0.172". It uses matte tin over nickel termination finish, suitable for board mounting applications in commercial reliability environments.
03-06-1042
Molex 03-06-1042 is a rectangular power connector with 0.63"x.2"x.78" dimensions, made of POLYAMIDE. It has 4 contacts arranged in S0P4, UL 94V-2 rated for panel mounting via crimp termination. Ideal for commercial applications requiring reliable female receptacle connectors with locking mounting option.
IPBT-102-H1-T-S-RA-K
Samtec
The Samtec IPBT-102-H1-T-S-RA-K is a rectangular power connector with liquid crystal polymer insulator. It has 2 contacts, matte tin over nickel finish, and operates b/w -55°C to 105°C. Ideal for board mounting in commercial applications requiring reliable power connections.
39-30-1041
Molex 39-30-1041 is a rectangular power connector with 4 contacts, made of brass and polyamide66. It has a dielectric voltage of 1500VAC, insulation resistance of 1000000000 ohm, and operates b/w -40 to 105 °C. Ideal for board mounting applications in commercial settings due to its durability and reliability.
1-480709-0
TE Connectivity 1-480709-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 12 contacts arranged in S0P12 pattern, suitable for PANEL mounting. Operating temp range -55 to 105 °C makes it ideal for commercial applications requiring high durability and insulation resistance of 100M ohm.
IPD1-06-D-K-R
The Samtec IPD1-06-D-K-R is a RECTANGULAR POWER CONNECTOR with 12 contacts, POLYAMIDE66 shell material, and FEMALE crimp termination. Ideal for power applications requiring secure cable mounting.
43020-1201
The Molex 43020-1201 is a rectangular power connector with 12 contacts, PBT-POLYESTER insulator, and UL94V-0 flammability rating. It is used for cable mounting applications in commercial settings, featuring a male contact gender and straight plug body style.
43650-0226
The Molex 43650-0226 is a rectangular power connector with 2 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. Ideal for board mounting applications, it has a temperature range from -40 to 105°C and meets UL flammability code standards.
1726480102
Molex 1726480102 is a rectangular power connector with matte tin finish and nickel barrier. It has 2 contacts made of brass, UL flammability code of 94V-2, and is suitable for board mounting. This male connector is commonly used in power applications requiring solder termination.
34566-0203
Molex 34566-0203 is a RECTANGULAR POWER CONNECTOR with 73 contacts, ideal for BOARD mounting. Made of GLASS FILLED SYNDIOTACTIC POLYSTYRENE, it features FEMALE contacts and SOLDER termination. Commonly used in applications requiring high-power connections.
43640-0501
The Molex 43640-0501 is a rectangular power connector with 5A signal current rating. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for commercial applications, this connector offers durability up to 30 cycles and UL flammability rating of 94V-0.
771-9975/116-701
Wago
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATHD04-1-4P-L009
Amphenol
ATHD04-1-4P
ATHD04-1-4P-L013
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved