Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 43650-0300 is a rectangular power connector with 3 contacts, featuring a mating contact pitch of 0.118" and body width of 0.172". Ideal for board mounting applications, it has a termination contact finish of TIN and insulator material of glass filled liquid crystal polymer.
Median Price
$0.515
Lifecycle Status
Suppliers In-Stock
50
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.426
100+ parts
-
1k+ parts
10k+ parts
Verical
$0.460
$0.380
Avnet
$0.472
$0.405
Sager
$0.539
$0.409
Adafruit Industries
$0.615
DigiKey
$1.340
Distrelec
$1.361
$0.806
$0.643
Element14
$1.391
$1.362
$1.332
$1.079
PEI Genesis
Master Electronics
$0.914
$0.740
Powell Electronics
$0.467
$0.381
Farnell
$0.751
TTI
$0.463
TTI Europe
$0.468
$0.450
Newark
$1.020
$0.827
Future Electronics
$0.375
$0.360
Heilind Electronics
$0.455
$0.487
Interstate Connecting
$0.513
$0.485
DF Sales Co.
$0.280
Digiode
$0.512
Nova Conductors
$0.636
Component Electronics Inc.
$0.770
$0.580
$0.500
Maritex
$1.295
$0.691
Chip Stock
IBS Electronics
$0.498
Cyclops Electronics Ltd
Flip Electronics
NAC Semi
$0.723
Vyrian
Martec Srl
Semi Source
VNN
Atlantic Semiconductor
Flex Direct, LLC
Vicor Industries, Inc.
Amalfi Trading
Classic Components Corporation
Inventory MP
Prism Electronics
ComSIT Distribution GmbH
Ashlea Components Ltd
Rutronik
$0.558
EMSNET
Bristol Electronics
ACDS - Activité Composants Distribution Service
Quittner & Schimek s.r.o.
A2Z Electronics, Inc.
Technoshack Inc.
Sensible Micro Corp
$0.575
$0.531
Semicontronic
$0.387
$0.377
Corphita
Argo Parts USA
$0.600
$0.582
Advanced Electronics
Bastille Electronics
$0.604
$0.574
$0.566
Continental Prestige Electronics
$1.250
$0.749
$0.599
Aztec Data Supply Inc.
$5.027
Andel Nordic
$7.161
$6.875
Perfect Parts
Abacus Technologies
Kepictronics
GreenTree Electronics
$0.609
Assy Fe
EMSNET (Excess)
Robosynatics
$6.729
$6.591
Lucentia Tech
Eastek
Legend Electronics Inc. (Excess)
Speed Components Ltd (Excess)
Cyclops Electronics Ltd (Excess)
The close proximity of mating contacts allows for a secure and reliable connection.
Compact body width enables efficient use of space in electronic devices.
TIN finish provides excellent conductivity and corrosion resistance.
Sufficient body depth allows for a sturdy and durable connector.
Glass filled liquid crystal polymer offers high strength and heat resistance, ensuring long-term reliability.
A thick plating layer enhances durability and conductivity of the connector.
Rectangular design provides a secure and stable connection for power applications.
Brass contacts offer superior conductivity and durability.
UL 94V-0 rating indicates high flame retardancy, ensuring safety in case of fire.
Polarized housing prevents improper connections, increasing overall safety.
Black color adds a professional and sleek finish to the connector.
Having multiple contacts allows for more power transfer channels, increasing versatility.
Board mounting option simplifies installation and ensures a secure attachment.
Optimal terminal pitch allows for easy assembly and maintenance.
Solder termination offers a reliable and durable connection.
Male gender contacts are typically more robust and offer a secure connection.
Right angle mounting style allows for flexibility in installation and space-saving.
Optimal insertion force ensures a secure connection without causing damage to the connector.
A standard terminal length ensures compatibility with various devices and applications.
Locking mounting option adds an extra layer of security to the connector, preventing accidental disconnections.
Rectangular contact pattern ensures a stable and reliable connection.
Commercial reliability standards ensure consistent performance in commercial applications.
Power Connectors 43650-0300 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
43650-0300 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices 13/Apr/2015
PCN Assembly/Origin - Mult Devs Cancel Supplier Change 28/Mar/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1554216004
Molex
WIRE AND CABLE;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Plessey Semiconductors Discrete Components Div
212514-1004
RECTANGULAR POWER CONNECTOR;
39-28-1143
Molex 39-28-1143 is a rectangular power connector with 14 contacts, made of brass and tin/copper finish. It has an insulation resistance of 1Gohm, dielectric voltage of 2200VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications due to its durability, reliability, and UL flammability rating.
1381G1
Anderson Power Products
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; DIN Conformance: NO; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
39-01-2040
Molex 39-01-2040 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable and panel mounting configurations.
DF22-4P-7.92DS(53)
POWER CONNECTOR;
1321G3
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; Total No. of Contacts: 1; Contact Material: NOT SPECIFIED; UL Flammability Code: 94V-0;
794274-1
TE Connectivity
TE Connectivity's 794274-1 is a RECTANGULAR POWER CONNECTOR with SILICONE RUBBER insulator. Operating temp range: -55 to 105°C. Suitable for cables with 20-14 AWG wires, rated at 115/230VAC mains connection.
5916G4
5916G4 by Anderson Power Products is a RECTANGULAR POWER CONNECTOR with operating temperatures ranging from -20 to 105°C. Featuring HERMAPHRODITIC contact gender, UL 94V-0 flammability code, and cable mounting type, it is ideal for power applications requiring a durable and reliable connector.
39-30-1039
Molex 39-30-1039 is a rectangular power connector with 3 contacts, rated at 9A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
39-01-2061
The Molex 39-01-2061 is a rectangular power connector with 6 contacts, POLYAMIDE insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable crimp termination in cable and panel mounting setups. With UL94V-2 flammability rating and polarization key, it offers reliable connectivity for various power systems.
1054311104
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
39-28-8120
Molex 39-28-8120 is a rectangular power connector with 12 contacts, made of brass and tin copper finish. It has a body size of 1.04" x 0.38" x 0.5", withstands up to 2200VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring high durability and reliability meeting CSA, TUV, UL standards.
43045-0814
The Molex 43045-0814 is a rectangular power connector with a body length of 0.636 inch, body width of 0.29 inch, and body depth of 0.39 inch. It is commonly used in board mounting applications and has an insulation resistance of 1000000000 ohm.
350778-1
The TE Connectivity 350778-1 is a Power Connector with 0.55" body length, 1000000000 ohm insulation resistance, and -55 to 105°C operating temperature range. It features POLYAMIDE insulator material and is used in applications requiring a durable male connector with panel mounting for commercial reliability.
172298-2110
39-29-5203
Molex 39-29-5203 is a rectangular power connector with 20 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability over 30 cycles.
19-09-2128
Molex 19-09-2128 is a rectangular power connector with 12 contacts arranged in 3 rows. Made of POLYAMIDE, it operates b/w -40 to 105°C. Suitable for commercial use, this plug-style connector is panel-mounted and features crimp termination, ideal for various power applications.
992G1
992G1 by Anderson Power Products is a RECTANGULAR POWER CONNECTOR with 2 contacts, HERMAPHRODITIC gender, and UL 94V-0 flammability rating. It features an empty shell for customization and cable mounting type. Ideal for power applications requiring reliable and secure connections.
1-640445-2
TE Connectivity 1-640445-2 is a rectangular power connector with 12 contacts. It features a mating contact pitch of 0.156", insulation resistance of 5G ohm, and rated current of 7A. Ideal for board mounting applications in commercial settings due to its durability and polarization key feature.
1723104105
Molex 1723104105 power connector features liquid crystal polymer insulator, 5 contacts, and UL 94V-0 flammability rating. With dimensions of 0.818" x 0.352" x 0.614", it is ideal for board mounting applications in a temperature range from -40°C to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43650-0200
The Molex 43650-0200 is a rectangular power connector with a mating contact pitch of 0.118" and body width of 0.172". It features bright tin over nickel termination, suitable for board mounting applications. With UL certification and polarization key, it offers reliable performance in commercial settings.
43650-0215
The Molex 43650-0215 Power Connector features a body length of 0.38", insulation resistance of 1000000000 ohm, and termination contact finish with Bright Tin (Sn) - Nickel (Ni) barrier. It is used in board mounting applications, has a max operating temperature of 105°C, and rated current of 8.5A for signal transmission.
43650-0315
The Molex 43650-0315 power connector has a body length of 0.498", insulation resistance of 1000000000 ohm, and operates b/w -40 to 105 °C. It is used in board mounting applications, with a contact material of brass and UL flammability rating of 94V-0.
43650-0400
The Molex 43650-0400 is a rectangular power connector with a mating contact pitch of 0.118 inches, suitable for board mounting with a PEG option. It has a max operating temperature of 105°C and min operating temperature of -40°C, making it ideal for various commercial applications.
43650-0616
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
43650-0218
The Molex 43650-0218 is a rectangular power connector with a mating contact pitch of 0.118". It features an insulation resistance of 1G ohm and dielectric voltage of 1500VAC, suitable for board mounting applications. With a rated current of 8.5A, this connector offers durability through 30 cycles and operates in temperatures ranging from -40 to 105°C.
43650-0412
The Molex 43650-0412 is a rectangular power connector with a mating contact pitch of 0.118 inches and a body length of 0.616 inch. It has an insulation resistance of 1,000,000,000 ohm and is commonly used in board mounting applications for power connections.
43650-0224
Molex 43650-0224 is a rectangular power connector with bright tin finish. It features glass-filled liquid crystal polymer insulator and brass contacts. Ideal for board mounting in applications requiring male surface mount connectors with 2 contacts.
43650-0316
The Molex 43650-0316 power connector features a body length of 0.498", insulation resistance of 1G ohm, and matte tin termination finish. Ideal for board mounting with a temperature range from -40 to 105 °C, it has a contact arrangement of S0P3 and durability of 30 cycles.
43650-0415
The Molex 43650-0415 Power Connector features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage of 1500VAC. Ideal for board mounting applications with a temperature range from -40 to +105°C, this connector offers durability with 30 cycles and reliability for commercial use.
43650-0327
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
43650-0624
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO; Total No. of Contacts: 6;
43650-0201
The Molex 43650-0201 is a rectangular power connector with a mating contact pitch of 0.118". Featuring matte tin over nickel termination, it has a body width of 0.172" and insulator made of glass-filled liquid crystal polymer. Ideal for board mounting applications, this connector offers reliable performance in commercial settings.
43650-0325
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Durability: 30 Cycles;
43650-0227
43650-0427
43650-0216
POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
43650-0301
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED;
43650-0303
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
43650-0310
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Empty Shell: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved