Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMA CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
Median Price
$9.662
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Arrow
1+ parts
$1.229
100+ parts
-
1k+ parts
10k+ parts
Newark
$2.480
Chip1Stop
$8.500
Farnell
$11.544
$9.088
$7.623
DigiKey
$11.830
$8.547
$7.396
Mouser Electronics
$13.580
$11.100
$9.470
Element14
$16.050
$11.230
$9.270
Powell Electronics
$7.720
$6.390
Master Electronics
$8.310
$7.440
Verical
$10.823
Electro Sonic
$8.240
$6.480
IBS Electronics
$10.803
$9.672
Gateway Technologies
$3.000
$2.669
Singapore Electronics
$3.300
$3.068
$2.936
$2.804
SSMA Connectors 901-10513-1 attributes and parameters. Explore more SSMA Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
901-10513-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Zowie Technology
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sensitron Semiconductor
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Rectron
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
M39012/56-3107
Sv Microwave
RF SMA CONNECTOR; Reliability: MIL-C-39012; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; MIL Conformity: YES; Maximum Operating Temperature (Cel): 165;
1052508-1
TE Connectivity
TE Connectivity's 1052508-1 is an RF SMA connector with a threaded coupling type, ideal for commercial applications. Featuring a 50 ohm characteristic impedance and PTFE insulator material, it offers low insertion loss of 0.13 dB up to 18 GHz. With a max operating temperature of 125°C and gold shell finish, this female jack connector ensures reliable performance in various environments.
132113RP
Amphenol
Amphenol's 132113RP is an RF SMA connector with a threaded coupling type and gold termination contact finish. It has a characteristic impedance of 50 ohm and is commonly used with RG-58C/U cables for commercial applications.
5205-2
Carlisle Interconnect Technologies
The Carlisle Interconnect Technologies 5205-2 is an RF SMA connector with a panel mount feature and stainless steel shell. It has a body depth of 0.445" and uses polytetrafluoroethylene as the insulator material. Ideal for commercial applications requiring reliable coaxial connections.
M39012/55-3028
Delta Electronics Manufacturing
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Termination Contact Finish: GOLD; Characteristic Impedance: 50 ohm; Coupling Type: THREADED; Manufacturer Series: M39012/55;
SF2921-61506
RF SMA CONNECTOR;
SF8018-6007
R125326000
Radiall S A
The Radiall S A R125326000 SSMA Connector features 0.1 dB insertion loss, 50 ohm impedance, and 18 GHz operating frequency. Ideal for RF applications, it has a threaded coupling type and gold-plated termination for low VSWR. Suitable for panel or cable mounting with solder termination in female jack configuration.
142-4701-501
Johnson Components
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Coupling Type: THREADED; Mounting Style: RIGHT ANGLE;
M39012/79B3001
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: THREADED; Termination Type: SOLDER; Maximum Operating Frequency: 18 GHz;
Midwest Microwave
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Ports: 1; Termination Type: SOLDER; MIL Conformity: YES;
M39012/83B3004
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Termination Contact Finish: GOLD; Mounting Style: STRAIGHT;
73251-0112
The Molex 73251-0112 is an RF SMA connector with POLYTETRAFLUOROETHYLENE insulator, STAINLESS STEEL shell, and RG-55 cable type. It is a male plug connector terminated by crimping for commercial applications requiring reliable coaxial connections.
23_SMA-50-0-324/111_NY
Huber+suhner Ag
23_SMA-50-0-324/111_NY by Huber+suhner Ag is a threaded RF SMA connector with a characteristic impedance of 50 ohm, suitable for panel mounting. With a max operating frequency of 18 GHz and durability of 500 cycles, it is commonly used in commercial applications requiring reliable signal transmission.
901-9511-3SF
Amphenol 901-9511-3SF is an RF SMA connector with 50 ohm impedance, 0.11 dB insertion loss, and 1.51 VSWR. It is used in commercial applications at frequencies up to 12.4 GHz for reliable signal transmission in high-temp environments.
901-9891-RFX
Amphenol's 901-9891-RFX is an RF SMA connector with threaded coupling, gold termination and mating contact finish. Featuring a low insertion loss of 0.13 dB, it operates at up to 18 GHz frequency for applications requiring a 50 ohm characteristic impedance in panel mount setups.
5-1814400-1
TE Connectivity 5-1814400-1 is an RF SMA connector with threaded coupling, suitable for board mounting. With a characteristic impedance of 50 ohm and max operating frequency of 3 GHz, it features a zinc alloy shell and polytetrafluoroethylene insulator material. Ideal for applications requiring high-frequency signal transmission in electronic devices.
142-1701-616
Cinch Connectivity Solutions
RF SMA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (30); Maximum Operating Frequency: 26.5 GHz; IEC Conformity: NO;
3-1478978-1
TE Connectivity's 3-1478978-1 RF SMA Connector features a 0.532" body length, 0.398" body width, and 0.397" body depth. With an insertion loss of 0.1 dB, it is ideal for applications requiring a 50 ohm characteristic impedance and operating frequencies up to 6 GHz. The connector has a durability of 500 cycles and can withstand temperatures from -65°C to 165°C.
22_SMA-50-0-10/111_NE
22_SMA-50-0-10/111_NE by Huber+suhner Ag is a SSMA Connector with gold termination, threaded coupling, and 50 ohm impedance. Ideal for RF applications up to 18 GHz, it features a durable beryllium copper shell and operates b/w -65°C to 165°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved