Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; MIL Conformity: NO; Insulator Material: ACETAL;
Median Price
$4.615
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Element14
1+ parts
$4.460
100+ parts
$3.244
1k+ parts
$3.023
10k+ parts
$2.949
Farnell
$4.770
$3.800
$2.920
-
Mouser Electronics
$4.970
$3.560
$3.040
$2.860
DigiKey
$5.350
$3.861
$3.283
$3.077
Newark
$5.720
$4.330
$3.620
Verical
$3.765
$3.282
Master Electronics
$3.400
$2.800
$2.710
Powell Electronics
$2.760
$2.110
Electro Sonic
$2.420
$2.380
IBS Electronics
$4.892
$3.722
$3.684
Connector Distribution Corp
Right Parts Inc.
Cyclops Electronics Ltd
American Microsemiconductor Inc.
Sunrise Surplus Inc.
Electro Mavin
Gateway Technologies
$6.000
$5.339
Singapore Electronics
$6.600
$6.137
$5.873
$5.609
Perfect Parts
4 Star Electronics, Inc. (Excess)
TNC Connectors 122426 attributes and parameters. Explore more TNC Connectors devices from Amphenol
Body Depth:
Body Diameter:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Style:
Coupling Type:
DIN Conformance:
Durability:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
122426 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
1355-99-529-9753, 1355995299753, 4710-01-479-5566, 4710014795566, 5935-01-535-7312, 5935015357312, 7690-00-926-8944, 7690009268944
NIIN
995299753, 014795566, 015357312, 009268944
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Micro Commercial Components
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Good-ark Electronics
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
122390
Amphenol
Amphenol 122390 is a RF TNC connector with 0.572" body diameter and 0.985" body depth. It has threaded coupling, brass shell material, and 75 ohm impedance. Ideal for RG-6/U cables, it is used in applications requiring crimp termination for male contact gender.
73205-5033
Molex
Molex 73205-5033 RF TNC Connector features 0.2 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. Ideal for board mounting applications up to 11 GHz frequency with threaded coupling and polypropylene insulator material.
R143207000
Radiall S A
R143207000 by Radiall S A is a RF TNC CONNECTOR with 50 ohm impedance, 0.18 dB insertion loss, and 1.3 VSWR. It features gold (Au) termination with Nickel (Ni) barrier, threaded coupling, and PTFE insulator. Ideal for applications up to 11 GHz requiring MIL and IEC conformity.
122393
Amphenol 122393 is an RF TNC connector with 0.18 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. It features gold termination contact finish and PTFE insulator material. Ideal for commercial applications up to 11 GHz, it is commonly used with Belden 9913 cable types for reliable connections.
5-1814801-3
TE Connectivity
TE Connectivity's 5-1814801-3 RF TNC Connector features a 0.55" body diameter and 1.003" depth, with a max operating temp of 85°C and -55°C min. Suitable for RG-59B/U cables, it has a zinc alloy shell, polymethylpentene insulator, and screw coupling type for panel mounting applications.
122393RP
122393RP by Amphenol is a RF TNC connector with POLYTETRAFLUOROETHYLENE insulator, suitable for LMR400 cables. It has a temperature range of -65 to 165°C, impedance of 50 ohm, and operates up to 11 GHz. With brass shell and nickel finish, it offers durability of 500 cycles for commercial applications.
031-2367
Amphenol 031-2367 is a RF TNC connector with 0.18 dB insertion loss, 1.3 VSWR, and 50 ohm impedance. It features gold termination contact finish and threaded coupling type for applications up to 11 GHz in cable mounting setups.
73216-2231
The Molex 73216-2231 RF TNC Connector features 0.25 dB insertion loss, 0.732" body depth, and 1.3 VSWR. Ideal for commercial applications, it is a panel mount connector with PTFE insulator material and brass shell finish. Suitable for board and panel mounting, this male jack connector has a right-angle mounting style with solder termination.
M39012/30-0010
Kings Electronics
RF TNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; IEC Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE;
1057780-1
Tyco Electronics Amp
RF TNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Termination Contact Finish: NICKEL; Mounting Style: STRAIGHT;
1057676-1
The TE Connectivity 1057676-1 is a TNC Connector with 50 ohm impedance, 0.06 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 15 GHz, it features a threaded coupling type, TFE insulator material, and gold shell finish. Suitable for panel mounting in environments ranging from -65°C to 105°C.
125-1-4
RF TNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; JESD-609 Code: e4; IEC Conformity: NO;
31-2300
Amphenol 31-2300 RF TNC Connector has 0.18 dB insertion loss, 1.3 VSWR, and operates up to 11 GHz. Ideal for panel mounting with threaded coupling, it features a 50 ohm impedance and acetate/PTFE insulator. Suitable for cable and panel termination in various applications requiring reliable RF connections.
5-1814804-1
TE Connectivity 5-1814804-1 is a RF TNC connector with 50 ohm impedance, PTFE insulator, and zinc alloy shell. It operates b/w -55 to 85°C, has female contact gender, and solder termination. Ideal for applications requiring high insulation resistance and operating frequency up to 4 GHz.
M39012/30-0101
Defense Logistics Agency
M39012/30-0101 by Defense Logistics Agency is a threaded RF TNC connector with 0.21 dB insertion loss and 1.3 VSWR, suitable for 11 GHz applications. It has a MIL conformity, characteristic impedance of 50 ohm, and male contact gender for cable mounting in right angle style.
RTD-50-M-00-H
TE Connectivity's RTD-50-M-00-H is a 50 ohm RF TNC connector with gold termination for soldering. It features a threaded coupling, PTFE insulator, and male plug body suitable for cable mounting applications.
EZ-240-TM-X
L-com
RF TNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Body Depth: 1.209 inch; Maximum Operating Frequency: 6 GHz;
R143.018.000
R143.018.000 by Radiall S A is a TNC Connector with 0.748" body diameter, 5000000000 ohm insulation resistance, and 0.2 dB insertion loss. Ideal for RF applications up to 11 GHz, it features gold over nickel termination contact finish and PTFE insulator material for durability in commercial settings.
R143182161
Radiall S A's R143182161 TNC Connector features 50 ohm impedance, 1.3 VSWR, and 1.5 GHz max frequency. Ideal for RF applications, it has a threaded coupling type and gold over nickel finish for MIL and IEC conformity.
1057679-1
TE Connectivity's 1057679-1 RF TNC Connector features threaded coupling, 0.06 dB insertion loss, and 50 ohm impedance. Ideal for panel mounting in applications requiring a max operating frequency of 15 GHz. With TFE insulator material and gold shell finish, it ensures reliable performance in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved