Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF BNC CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Median Price
$5.990
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$2.731
100+ parts
$1.995
1k+ parts
-
10k+ parts
Heilind Electronics
$5.320
$4.290
$4.156
Interstate Connecting
$5.815
$4.831
$4.551
Farnell
$6.270
$4.020
$3.720
Element14
$7.431
$6.044
DigiKey
$7.630
$5.513
$4.686
Mouser Electronics
$10.160
$8.180
$6.050
Newark
$10.980
$8.400
$8.200
Chip1Stop
$3.770
Verical
$6.165
$5.918
Master Electronics
$5.240
$3.830
$3.780
Powell Electronics
$5.150
$4.930
TME
$9.170
$6.210
$5.420
Electro Sonic
$4.080
$3.170
$2.930
IBS Electronics
$7.349
$5.372
$5.301
Electronic Expediters
Prism Electronics
Gateway Technologies
$4.435
$3.947
Singapore Electronics
$4.878
$4.536
$4.341
$4.146
Kepictronics
Perfect Parts
BNC Connectors 112740-13 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Contact Material:
112740-13 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
Transys Electronics
Pulse Electronics
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
31-5539
Amphenol
Amphenol 31-5539 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications, it has a bayonet coupling type and gold mating contact finish for reliable connections in board and panel mounting setups.
1-1337542-0
TE Connectivity 1-1337542-0 is a BNC Connector with panel mount, ideal for RF applications. Featuring 50 ohm impedance, it has a max frequency of 4 GHz and insulation resistance of 5 Gohm. With a durable design for commercial use, this connector offers reliable performance in temperatures ranging from -55 to 85°C.
414459-1
TE Connectivity's 414459-1 is a BNC Connector with Bayonet coupling, PBT-Polyester insulator, and 75 ohm impedance. Ideal for RF applications up to 2 GHz, it features a right-angle mounting style and solder termination for female contacts.
1-1337422-0
TE Connectivity's 1-1337422-0 BNC Connector features an Insulation Resistance of 5G ohm, Dielectric Withstanding Voltage of 2100VAC, and Insertion Loss of 0.2 dB. Ideal for RF applications with a characteristic impedance of 75 ohm, this connector is durable with a durability of 500 cycles and operates b/w -65 to 165 °C.
B705001-NPB3G-50
Amphenol B705001-NPB3G-50 is a 50 ohm RF BNC connector with gold mating contact finish and polypropylene insulator. It features bayonet coupling, solder termination, and panel mount capability. Ideal for applications requiring high-frequency signal transmission up to 1 GHz in right-angle mounting configurations.
R142017000
Radiall S A
R142017000 by Radiall S A is a BNC connector with 0.2 dB insertion loss, 1.3 VSWR, and 75 ohm characteristic impedance. It is used for RF applications up to 1.5 GHz, featuring bayonet coupling and clamp termination.
2507
Ddk
RF BNC CONNECTOR; Contact Gender: FEMALE; Filter Feature: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; DIN Conformance: NO; Characteristic Impedance: 50 ohm;
M39012/16-0101
Winchester Interconnect
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Type: CLAMP SOLDER; Filter Feature: NO;
M39012/18-0102
Winchester Interconnect's M39012/18-0102 is a BNC RF connector with bayonet coupling, suitable for panel mounting. It features female contact gender, RG-58 cable compatibility, and jack body style. Ideal for straight mounting applications in RF systems requiring coaxial connections.
BNC7T-J-P-HN-RA-BH1
Samtec
The Samtec BNC7T-J-P-HN-RA-BH1 is a RF BNC connector with bayonet coupling, gold contact finish, and 75 ohm impedance. Ideal for applications requiring panel mount connectors with right angle mounting, such as high-frequency signal transmission up to 6 GHz.
1-1337548-0
TE Connectivity's 1-1337548-0 BNC Connector features 50 ohm impedance, 0.2 dB insertion loss, and 500 cycles durability. Ideal for RF applications up to 4 GHz, it has a bayonet coupling type and PTFE insulator material.
M39012/16-0102
Delta Electronics Manufacturing
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: M39012/16; Mounting Type: CABLE; Mating Contact Finish: GOLD;
112762
Amphenol 112762 is a RF BNC connector with 75 ohm impedance, zinc alloy shell, and female contact gender. It is used in commercial applications for board mounting with right angle style, solder termination, and locking option.
5414459-1
TE Connectivity's 5414459-1 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications with characteristic impedance of 75 ohm, it has a max operating frequency of 2 GHz and is designed for commercial reliability.
11_BNC-75-2-15/133_NE
Huber+suhner Ag
11_BNC-75-2-15/133_NE by Huber+suhner Ag is a BNC connector with gold termination, bayonet coupling, and brass shell. It has a characteristic impedance of 75 ohm and operates up to 1 GHz. Ideal for RF applications requiring reliable performance in commercial settings.
73171-1740
Molex
Molex 73171-1740 RF BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 2.5 GHz operating frequency. Ideal for commercial applications requiring reliable board-mounted female connectors with nickel finish and PTFE insulator.
2555
2555 by Ddk is a BNC Connector with Bayonet coupling, PTFE insulator, and RF connector type. It has a VSWR of 1.3, 50 ohm impedance, male contact gender, plug body style, and right-angle mounting. Ideal for RF applications requiring secure connections with low signal loss in cable installations.
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Ports: 1; MIL Conformity: YES; Mounting Type: CABLE;
1-1337432-0
TE Connectivity's 1-1337432-0 BNC Connector offers an Insulation Resistance of 5G ohm, Dielectric Withstanding Voltage of 2100VAC, and Insertion Loss of 0.2 dB. Ideal for RF applications with characteristic impedance of 75 ohm, it is a durable connector suitable for commercial use up to 2 GHz frequency.
R141082000W
R141082000W by Radiall S A is a BNC connector with 0.563" body diameter, 5000000000 ohm insulation resistance, and 0.115 dB insertion loss. It is used in RF applications up to 4 GHz, featuring POLYTETRAFLUOROETHYLENE insulator material for durability and NICKEL shell finish for reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved