Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF BNC CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; Body or Shell Style: PLUG; Mounting Type: PANEL;
Median Price
$5.510
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$3.830
100+ parts
-
1k+ parts
10k+ parts
RS Americas
$5.040
Heilind Electronics
$5.340
$4.306
$4.172
Interstate Connecting
Chip1Stop
$5.440
TTI
$5.580
$3.810
$3.250
$3.210
Arrow
$5.584
$4.367
DigiKey
$6.060
$4.678
$4.220
$4.020
Mouser Electronics
$4.450
$4.110
$3.170
Farnell
$6.290
$4.390
$3.770
Element14
$6.700
$5.360
$4.690
Newark
$7.590
$5.520
Bürklin Elektronik
$7.680
$5.930
$5.320
Encitech
$33.100
Powell Electronics
$4.040
$3.100
$2.820
Verical
$4.482
$3.953
Master Electronics
$4.029
$3.135
TTI Europe
$3.150
$2.230
TestEquity
$5.480
TME
$7.060
$4.940
NAC Semi
$8.550
$7.920
IBS Electronics
$5.259
$4.446
$4.376
Electronic Expediters
Advanced Electronics
$4.590
$4.177
$3.764
Andel Nordic
$55.940
$39.155
Gateway Technologies
$118.590
$105.545
Singapore Electronics
$130.449
$121.317
$116.099
$110.881
GreenTree Electronics
Perfect Parts
Kepictronics
Eastek
BNC Connectors 112420 attributes and parameters. Explore more BNC Connectors devices from Amphenol
Body Depth:
Body Diameter:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
Dielectric Withstanding Voltage (V):
Insertion Loss:
Insulation Resistance:
Insulator Color:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
112420 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
2090-01-574-6856, 2090015746856, 2530-12-332-3410, 2530123323410, 5310-15-061-0040, 5310150610040, 5935-01-664-3377, 5935016643377, 5950-01-198-5432, 5950011985432, 6150-00-409-6594, 6150004096594, 6650-25-131-5552, 6650251315552
NIIN
015746856, 123323410, 150610040, 016643377, 011985432, 004096594, 251315552
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
First Components International
1-1337422-0
TE Connectivity
TE Connectivity's 1-1337422-0 BNC Connector features an Insulation Resistance of 5G ohm, Dielectric Withstanding Voltage of 2100VAC, and Insertion Loss of 0.2 dB. Ideal for RF applications with a characteristic impedance of 75 ohm, this connector is durable with a durability of 500 cycles and operates b/w -65 to 165 °C.
R141426000
Radiall S A
Radiall S A's R141426000 BNC Connector features 0.2 dB Insertion Loss, Gold (Au) - with Nickel (Ni) Termination Contact Finish, and Bayonet Coupling Type. With a 50 ohm Characteristic Impedance and max operating frequency of 4 GHz, it is ideal for RF applications requiring high-quality signal transmission on boards.
MP-13-10-1RG179
SPC TECHNOLOGY/ MULTICOMP
RF BNC CONNECTOR;
73100-0131
Molex
The Molex 73100-0131 RF BNC Connector has a low insertion loss of 0.2 dB and a VSWR of 1.3, suitable for up to 4 GHz frequency applications. Featuring a right-angle mounting style, this female connector with solder termination is ideal for panel mount installations in commercial settings.
31-80101
Amphenol
Amphenol 31-80101 BNC Connector features gold finish, bayonet coupling, and PTFE insulator. Ideal for RF applications with 75 ohm impedance, 1.3 VSWR, and up to 4 GHz frequency range. Male crimp termination on cable mount plug design for straight mounting style.
2331350-1
The TE Connectivity 2331350-1 is a BNC Connector with an Insulation Resistance of 5G ohm, Insertion Loss of 0.2 dB, and Max Operating Temperature of 165°C. Ideal for RF applications up to 4 GHz, it features a Bayonet Coupling Type and PolyTetraFluoroEthylene insulator material.
R141075000W
R141075000W by Radiall S A is a RF BNC connector with 50 ohm impedance, 0.13 dB insertion loss, and 1.22 VSWR. It features bayonet coupling, PTFE insulator, and crimp termination for applications up to 4 GHz in military and IEC compliant setups.
31-221
Amphenol 31-221 BNC Connector has 0.2 dB insertion loss, 2100VAC dielectric voltage, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with nickel finish, PTFE insulator, and brass shell. Suitable for commercial use in cable and panel mounting with female coax contact.
227426-1
Tyco Electronics Amp
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mounting Style: STRAIGHT; Body or Shell Style: JACK;
34-1018
Amphenol 34-1018 BNC Connector features 1400VAC Dielectric Withstanding Voltage, 0.689" Body Depth, and 75 ohm Characteristic Impedance. Ideal for RF applications up to 4 GHz frequency with POLYTETRAFLUOROETHYLENE insulator material and GOLD shell finish. Suitable for commercial use with FEMALE contact gender and BOARD mounting type.
M39012/16-0220
Defense Logistics Agency
M39012/16-0220 by Defense Logistics Agency is a BNC Connector with 0.2 dB Insertion Loss, 1.3 VSWR, and 50 ohm Impedance. Ideal for RF applications up to 4 GHz, it features Bayonet Coupling and Crimp Termination for secure connections in military equipment.
751-10-9
Winchester Interconnect
751-10-9 BNC Connector by Winchester Interconnect features 0.12 dB insertion loss, gold over nickel termination, and bayonet coupling. Ideal for RF applications up to 4 GHz, it is a panel mount connector with a 50 ohm impedance and crimp termination. Suitable for cable and panel mounting in various electronic systems.
112491-11
Amphenol 112491-11 is a BNC connector with gold termination, bayonet coupling, and PTFE insulator. Ideal for RF applications, it features a brass shell with nickel finish. Suitable for commercial use in cable mounting with crimp termination.
227676-1
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; MIL Conformity: NO; Contact Material: PHOSPHOR BRONZE;
R316072
Radiall S A's R316072 BNC Connector features Bayonet coupling, PTFE insulator, 50 ohm impedance. Ideal for RF applications up to 2 GHz with male contact gender and crimp termination on cable mounting.
PE4044
Pasternack Enterprises
PE4044 by Pasternack Enterprises is a RF BNC connector with GOLD finish, suitable for male contact termination. Featuring BAYONET coupling and POLYTETRAFLUOROETHYLENE insulator, it is ideal for cable mounting applications in straight style configurations.
M39012/20-0007
Kings Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: RIGHT ANGLE; Manufacturer Series: M39012/20-0007;
68175-1004
Amphenol 68175-1004 BNC Connector features 50 ohm impedance, 2 GHz frequency, and 1060VAC dielectric voltage. Ideal for RF applications with RG-62A/U cables, it offers durability of 500 cycles and operates b/w -65 to 165°C.
4488
Pomona Electronics
The Pomona Electronics 4488 is a BNC connector with gold termination, nickel shell finish, and brass shell material. It has a body diameter of 0.571" and is ideal for RF applications with characteristic impedance of 50 ohm. This male plug connector is designed for RG-55 cable mounting using clamp solder termination.
6274360-1
TE Connectivity's 6274360-1 BNC Connector features a 0.365" body diameter, PTFE insulator, and 5000000000 ohm insulation resistance. Ideal for RF applications with a characteristic impedance of 75 ohm, it operates b/w -55 to 85 °C and can withstand up to 4 GHz frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved