Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 5227755-2 is a BNC connector with bayonet coupling type and glass filled polybutylene terephthalate insulator material. It has a max operating temperature of 85°C and can handle frequencies up to 4 GHz. This RF connector is commonly used in panel-mounted applications requiring a 50 ohm characteristic impedance.
Median Price
$3.038
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
RS Americas
1+ parts
$1.020
100+ parts
-
1k+ parts
10k+ parts
Arrow
$1.956
$1.596
Farnell
$2.350
$1.890
Master Electronics
$2.387
$2.170
$2.020
$1.960
Chip1Stop
$2.650
Element14
$2.835
$2.269
TE Connectivity
$3.570
$3.160
$2.880
Newark
$3.980
$2.410
$2.370
RS (Exports)
$4.400
Mouser Electronics
$4.440
$2.840
$2.440
DigiKey
$4.780
$3.449
$2.931
$2.748
Powell Electronics
$8.364
$4.337
PEI Genesis
Verical
Digiode
$0.969
Nova Conductors
$2.246
VNN
Vyrian
Electro Sonic
$3.470
$2.190
IBS Electronics
$3.100
$2.903
$2.090
Corphita
$0.918
Argo Parts USA
Continental Prestige Electronics
$2.202
Aztec Data Supply Inc.
$8.857
Andel Nordic
$556.826
$534.552
Perfect Parts
Kepictronics
Glotronic Ltd.
Assy Fe
Bayonet coupling provides quick and secure connection, making it easy to connect and disconnect the BNC connectors efficiently.
The use of glass filled polybutylene terephthalate as insulator material ensures high durability and resistance to high temperatures, making the connectors reliable for long-term use.
With a high maximum operating temperature of 85 °C, these connectors can withstand demanding operating conditions without compromising performance.
The low minimum operating temperature of -55 °C allows the connectors to function effectively in extreme cold environments.
Nickel shell finish provides corrosion resistance and ensures a longer lifespan for the connectors, making them suitable for a variety of applications.
RF BNC connectors are suitable for a wide range of radio frequency applications, ensuring compatibility and reliability in various systems.
The characteristic impedance of 50 ohm ensures optimal signal transfer and minimizes signal loss, making these connectors ideal for high-frequency applications.
Zinc alloy shell material provides strength and durability to the connectors, ensuring long-lasting performance in challenging environments.
Solder termination offers a secure and reliable connection, ensuring stable signal transmission and reducing the risk of signal interference.
With a high maximum operating frequency of 4 GHz, these connectors can handle high-frequency signals effectively, making them suitable for demanding communication systems.
BNC Connectors 5227755-2 attributes and parameters. Explore more BNC Connectors devices from TE Connectivity
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
5227755-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
LM358AN
National Semiconductor
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Microsemi
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Instrument
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LM317AEMP/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
MP-13-15-1TSSRG179U
SPC TECHNOLOGY/ MULTICOMP
RF BNC CONNECTOR;
MP-13-11-4TGNRG179
112559
Amphenol
Amphenol 112559 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. Ideal for RF applications with 75 ohm impedance, it features a brass shell and crimp termination for commercial reliability in cable mounting setups.
1-1337422-0
TE Connectivity's 1-1337422-0 BNC Connector features an Insulation Resistance of 5G ohm, Dielectric Withstanding Voltage of 2100VAC, and Insertion Loss of 0.2 dB. Ideal for RF applications with a characteristic impedance of 75 ohm, this connector is durable with a durability of 500 cycles and operates b/w -65 to 165 °C.
1-1337445-0
TE Connectivity 1-1337445-0 is a BNC Connector with body dimensions of 0.472" x 0.472" x 0.511". It has an insulation resistance of 5000000000 ohm and operates b/w -65 to 165 °C. Ideal for RF applications, it features a bayonet coupling type, PTFE insulator, brass shell material, and can withstand up to 4 GHz frequency.
PE4604
Pasternack Enterprises
RF BNC CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
5344
Pomona Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Additional Features: APPLICABLE CABLES: RG 58/U; RG 58A/U; RG 58C/U; RG 141/U; RG 141A/U; Termination Type: CRIMP;
1058016-1
TE Connectivity's 1058016-1 is a BNC connector with panel mount capability. It has a body depth of 0.59 inch and a bayonet coupling type. With a max operating frequency of 4 GHz, it is commonly used in RF applications for its 50 ohm characteristic impedance and solder termination type.
5227754-3
TE Connectivity's 5227754-3 BNC Connector features Bayonet coupling, Glass Filled Polybutylene Terephthalate insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz with female contact gender and solder termination.
112586
Amphenol 112586 is a RF BNC connector with gold termination, bayonet coupling, and PTFE insulator. Ideal for board mounting applications requiring high-quality female connectors.
5225398-7
TE Connectivity's 5225398-7 RF BNC Connector has an Insulation Resistance of 5x10^9 ohm, MIL Conformity, and a Max Operating Temperature of 165°C. Ideal for applications requiring a durable connector with characteristic impedance of 50 ohm, such as in RF systems operating up to 4 GHz.
13-25
13-25 BNC Connector by Spc Technology/Multicomp features a Panel Mount design with Bayonet Coupling. Made of Polytetrafluoroethylene, it is an RF BNC Connector with Female Contact Gender and Socket Body Style. Ideal for straight mounting applications in various electronic devices.
R142334700
Radiall S A
Radiall S A's R142334700 is a BNC Connector with Bayonet coupling, PTFE insulator, and 75 ohm impedance. Ideal for RF applications up to 6 GHz, it features panel mount capability and crimp termination for female contacts in straight mounting style.
202100
Amphenol's 202100 BNC Connector features Bayonet coupling, Polypropylene insulator, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this twist-on connector with male contact is designed for cable mounting in a right-angle configuration.
BNC7T-J-P-HN-ST-TH1
Samtec
BNC7T-J-P-HN-ST-TH1 by Samtec is a RF BNC connector with a characteristic impedance of 75 ohm. It has a max operating frequency of 6 GHz and features a bayonet coupling type for easy connection. This connector is commonly used in board mounting applications requiring high-frequency signal transmission.
M39012/20-0101
Winchester Interconnect
Winchester Interconnect's M39012/20-0101 BNC Connector features 0.3 dB insertion loss, gold termination contact finish, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, this bayonet-coupling connector with PTFE insulator is MIL compliant. It has a VSWR of 1.35 and uses clamp solder termination on cables.
2-331350-1
TE Connectivity's 2-331350-1 BNC Connector features 0.2 dB insertion loss, bayonet coupling, and PTFE insulator. Ideal for RF applications with 50 ohm impedance, it operates b/w -65 to 165 °C and supports cable mounting with crimp termination up to 4 GHz frequency.
B1112A1-ND3G-1-50
Amphenol B1112A1-ND3G-1-50 is a RF BNC connector with gold over nickel finish, bayonet coupling, and right angle mounting. Ideal for cable termination in male contact gender applications requiring crimp solder termination.
M39012/20-0502
Kings Electronics
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Insertion Loss: .2 dB; MIL Conformity: YES;
1-1478402-0
TE Connectivity 1-1478402-0 is a BNC Connector with PTFE insulator, 50 ohm impedance, and 4 GHz operating frequency. Ideal for RF applications, it features bayonet coupling, solder termination, and brass shell material for commercial reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5227677-1
TE Connectivity's 5227677-1 RF BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and max operating frequency of 4GHz. Ideal for applications requiring a durable, right angle panel mount connector with a characteristic impedance of 50 ohm.
5227699-3
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Depth: .625 inch; Mixed Contacts: NO;
5227161-7
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
5227161-9
TE Connectivity's 5227161-9 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications with a max operating frequency of 4GHz, this connector has a durable zinc alloy shell, black insulator color, and female contact gender.
5227726-2
TE Connectivity's 5227726-2 BNC Connector is a bayonet coupling type, with a maximum operating temperature of 85°C and a minimum of -55°C. Its insulator material is glass-filled polybutylene terephthalate. This RF BNC connector has one port and a characteristic impedance of 50 ohm. It is suitable for general-purpose applications and can handle a maximum operating frequency of 4 GHz.
5227161-1
5227222-3
Tyco Electronics Amp
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mounting Type: BOARD AND PANEL; Body or Shell Style: JACK;
TE Connectivity's 5227222-3 BNC Connector features 0.581" body length, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications with a max operating frequency of 4 GHz, this connector has a straight mounting style and is suitable for commercial use.
5227161-3
TE Connectivity's 5227161-3 BNC Connector is a right angle jack with a body length of 0.625", width of 0.581", and depth of 0.625". It has a characteristic impedance of 50 ohm and can operate at temperatures ranging from -55 to 85°C. This connector is commonly used in RF applications up to 4 GHz.
5227699-2
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
5227754-2
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Ports: 1; Mounting Option-1: DETENT;
5227222-6
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD AND PANEL; Mounting Style: STRAIGHT; IEC Conformity: NO;
TE Connectivity's 5227222-6 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and max operating frequency of 4GHz. Ideal for RF applications, this female connector with a jack shell style is designed for durability with 500 cycles and operates in temperatures ranging from -55 to 85°C.
5227726-3
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Coupling Type: BAYONET;
5227726-1
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 1; Contact Material: NOT SPECIFIED;
5227673-1
TE Connectivity's 5227673-1 BNC Connector features a body length of 0.625", insulation resistance of 5G ohm, and max operating frequency of 4 GHz. Ideal for RF applications, this connector has a bayonet coupling type and is made with polymethylpentene insulator material.
5227426-1
TE Connectivity's 5227426-1 BNC Connector features 0.7" body diameter, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications with a characteristic impedance of 50 ohm and max operating frequency of 4 GHz.
5227699-1
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: PANEL; MIL Conformity: NO;
5227222-1
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Body or Shell Style: JACK; IEC Conformity: NO;
TE Connectivity 5227222-1 is a BNC Connector with 0.581" body length, 5000000000 ohm insulation resistance, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features a bayonet coupling type and PBT-POLYESTER insulator material. Suitable for commercial use in panels with solder termination.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved