Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Body or Shell Style: JACK; IEC Conformity: NO;
Median Price
$3.918
Lifecycle Status
Suppliers In-Stock
34
In-Stock Inventory
1k+
TE Connectivity
1+ parts
$4.510
100+ parts
$3.250
1k+ parts
$2.770
10k+ parts
-
Mouser Electronics
$4.980
$3.680
$3.190
$2.750
DigiKey
$5.480
$4.059
$3.521
$3.152
Newark
$6.630
$5.060
$4.190
$3.990
Verical
$4.047
$3.353
$3.259
Farnell
$4.140
$3.620
Master Electronics
$3.580
$3.120
$2.790
Powell Electronics
$3.790
$3.110
Sager
$3.270
Interstate Connecting
$3.268
$2.801
Arrow
$2.902
$2.668
TTI
$2.900
$2.700
$2.370
Component Electronics Inc.
$2.310
$1.730
$1.500
DF Sales Co.
$2.740
Nova Conductors
Digiode
$3.904
Electro Sonic
$2.500
$2.410
$2.260
IBS Electronics
$4.301
$3.779
$2.876
VNN
Vyrian
PAR Electronics
Atlantic Semiconductor
Prism Electronics
Inventory MP
R&J Components
Connector Distribution Corp
Right Parts Inc.
A2Z Electronics, Inc.
Bristol Electronics
Sensible Micro Corp
$1.111
$1.026
J & M Industries LLC
Century Electronics Ltd.
PC Components Company LLC
Aranea Global
$2.695
$2.587
Argo Parts USA
Corphita
$3.699
Continental Prestige Electronics
$4.350
$3.150
$2.290
Aztec Data Supply Inc.
$8.820
Kepictronics
Futuretech Components
Perfect Parts
Assy Fe
Authorized Procurement Solutions
Robosynatics
$10.332
$9.567
Lucentia Tech
BNC Connectors 5227222-1 attributes and parameters. Explore more BNC Connectors devices from Tyco Electronics Amp
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
5227222-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
PCN Assembly/Origin - Mult Devs - Mfg Location Chg 23/APR/2021
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Yageo
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Cheng-yi Electronic
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
31-5486-1010
Amphenol
Amphenol 31-5486-1010 BNC Connector features 0.2 dB insertion loss, 1.35 VSWR, and 4 GHz max operating frequency. Ideal for RF applications requiring a 50 ohm characteristic impedance with gold termination finish for low signal loss. Suitable for board and panel mounting in high-frequency communication systems.
5226978-3
The TE Connectivity 5226978-3 is a BNC connector with body dimensions of 1.15" x 0.625" x 0.625". It has an insulation resistance of 5G ohm and operates b/w -55°C to 85°C. Ideal for RF applications, this female jack connector has a characteristic impedance of 50 ohm and can handle frequencies up to 4 GHz.
M39012/20-0502
Winchester Interconnect
The Winchester Interconnect M39012/20-0502 is a RF BNC connector with 50 ohm impedance and 0.3 dB insertion loss. It features gold termination contact finish, bayonet coupling type, and polytetrafluoroethylene insulator material. Ideal for applications up to 4 GHz, this MIL-G-45204 compliant connector is commonly used in RG-180/U cables for reliable signal transmission.
31-5329-52RFX
Amphenol 31-5329-52RFX is a BNC connector with 0.2 dB insertion loss, 1500VAC dielectric voltage, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features gold termination finish, bayonet coupling, and operates b/w -65°C to 165°C.
M39012/22-0001
Kings Electronics
RF BNC CONNECTOR; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2100VAC; Maximum Operating Temperature (Cel): 165; Insulation Resistance: 5000000000 ohm; Mounting Type: CABLE AND PANEL;
5-225395-7
Tyco Electronics Amp
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Characteristic Impedance: 50 ohm; Panel Mount: NO;
112762
Amphenol 112762 is a RF BNC connector with 75 ohm impedance, zinc alloy shell, and female contact gender. It is used in commercial applications for board mounting with right angle style, solder termination, and locking option.
31-5539
Asc Capacitors
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; Characteristic Impedance: 50 ohm; Termination Type: SOLDER; Coupling Type: BAYONET;
112512
The Amphenol 112512 is a BNC connector with a body diameter of 0.571" and dielectric voltage of 1700VAC. It features gold termination, operates b/w -65 to 165°C, and has a characteristic impedance of 50 ohm. Ideal for RF applications up to 4GHz, it uses RG-316/U cable type with male contact gender in commercial settings.
11_BNC-75-2-15/133_NE
Huber+suhner Ag
11_BNC-75-2-15/133_NE by Huber+suhner Ag is a BNC connector with gold termination, bayonet coupling, and brass shell. It has a characteristic impedance of 75 ohm and operates up to 1 GHz. Ideal for RF applications requiring reliable performance in commercial settings.
112427
Amphenol 112427 is a BNC connector with bayonet coupling, suitable for RF applications. Features include 75 ohm impedance, acetal insulator, and solder termination. Ideal for use in straight mounting configurations requiring female contact gender.
R141018000
Radiall S A
Radiall S A's R141018000 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it has a bayonet coupling type and gold-plated contacts with nickel barrier for reliable signal transmission in cable installations.
031-70526-23
Amphenol 031-70526-23 BNC Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and POLYTETRAFLUOROETHYLENE Insulator Material. Ideal for RF applications with a max operating frequency of 12 GHz, this connector offers durability with 500 cycles and operates in temperatures ranging from -65 to 165 °C.
M39012/20-0007
Delta Electronics Manufacturing
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Coupling Type: BAYONET; Additional Features: STANDARD: MIL-PRF-39012, APPLICABLE CABLES: RG 142, RG 223, RG 303, RG 400, CAPTIVE CONTACT;
TC-400-BM-X
Times Microwave Systems
RF BNC CONNECTOR;
112586
Amphenol 112586 is a RF BNC connector with gold termination, bayonet coupling, and PTFE insulator. Ideal for board mounting applications requiring high-quality female connectors.
1-5225398-5
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: YES; Termination Type: CRIMP; MIL Conformity: NO;
227661-1
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Additional Features: AMP; Mating Contact Finish: NOT SPECIFIED;
M39012/16-0101
Defense Logistics Agency
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Poles: 1; Contact Style: COAX; DIN Conformance: NO;
73131-5013
Molex
Molex 73131-5013 BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications requiring reliable signal transmission up to 4 GHz with a low insertion loss of 0.2 dB. Suitable for commercial use in board and panel mounting setups due to its female coax contact style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5227677-1
TE Connectivity's 5227677-1 RF BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and max operating frequency of 4GHz. Ideal for applications requiring a durable, right angle panel mount connector with a characteristic impedance of 50 ohm.
5227699-3
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Depth: .625 inch; Mixed Contacts: NO;
5227161-7
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
5227161-9
TE Connectivity's 5227161-9 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and bayonet coupling type. Ideal for RF applications with a max operating frequency of 4GHz, this connector has a durable zinc alloy shell, black insulator color, and female contact gender.
5227726-2
TE Connectivity's 5227726-2 BNC Connector is a bayonet coupling type, with a maximum operating temperature of 85°C and a minimum of -55°C. Its insulator material is glass-filled polybutylene terephthalate. This RF BNC connector has one port and a characteristic impedance of 50 ohm. It is suitable for general-purpose applications and can handle a maximum operating frequency of 4 GHz.
5227161-1
5227222-3
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SOLDER; Mounting Type: BOARD AND PANEL; Body or Shell Style: JACK;
TE Connectivity's 5227222-3 BNC Connector features 0.581" body length, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications with a max operating frequency of 4 GHz, this connector has a straight mounting style and is suitable for commercial use.
5227161-3
TE Connectivity's 5227161-3 BNC Connector is a right angle jack with a body length of 0.625", width of 0.581", and depth of 0.625". It has a characteristic impedance of 50 ohm and can operate at temperatures ranging from -55 to 85°C. This connector is commonly used in RF applications up to 4 GHz.
5227699-2
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
5227754-2
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Ports: 1; Mounting Option-1: DETENT;
5227222-6
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD AND PANEL; Mounting Style: STRAIGHT; IEC Conformity: NO;
TE Connectivity's 5227222-6 BNC Connector features a body length of 0.581", insulation resistance of 5G ohm, and max operating frequency of 4GHz. Ideal for RF applications, this female connector with a jack shell style is designed for durability with 500 cycles and operates in temperatures ranging from -55 to 85°C.
5227726-3
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE; Coupling Type: BAYONET;
5227726-1
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 1; Contact Material: NOT SPECIFIED;
5227673-1
TE Connectivity's 5227673-1 BNC Connector features a body length of 0.625", insulation resistance of 5G ohm, and max operating frequency of 4 GHz. Ideal for RF applications, this connector has a bayonet coupling type and is made with polymethylpentene insulator material.
5227426-1
TE Connectivity's 5227426-1 BNC Connector features 0.7" body diameter, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications with a characteristic impedance of 50 ohm and max operating frequency of 4 GHz.
5227699-1
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: PANEL; MIL Conformity: NO;
5227222-1
TE Connectivity 5227222-1 is a BNC Connector with 0.581" body length, 5000000000 ohm insulation resistance, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features a bayonet coupling type and PBT-POLYESTER insulator material. Suitable for commercial use in panels with solder termination.
5227222-9
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYMETHYLPENTENE; Panel Mount: YES; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved