Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 304; Package Code: FQFP; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Touchstone Systems
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
North Shore Components
Andel Nordic
$1.823
$1.750
Semicontronic
$5.000
$4.875
$4.850
Modulus Dynamics
$16.353
AZTECH Wire
$16.400
One Stop Electronics
$17.000
Texas Native Microelectronics
$134.345
$128.971
$124.941
$118.224
Qasali Group International
$362.732
Microchip USA
$515.589
Alle Elektronik GmbH
A-Z Elektronik GmbH
S.R.D Solutions
Kepictronics
Assy Fe
Northwest PG Solutions
$3.676
GreenTree Electronics
Perfect Parts
Kenton Components
$149.929
Authorized Procurement Solutions
MARBEL Systems
Corohmni
Vigor
Supply Digital
Native Components
$3.638
Corphita
Giza Technologies, Inc.
Programmable Logic Devices (PLD) EPM9560RC304-15 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
In-System Programmable:
Organization:
Output Function:
No. of Macro Cells:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
JTAG Boundary Scan Test:
Qualified:
EPM9560RC304-15 Programmable ICs trade compliance attributes, and parameters.
ECCN
3A991.D
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 26/Feb/2007
PCN Packaging - All Dev Pkg Chg 1/Aug/2018
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Yangzhou Yangjie Electronics
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Promax-johnton
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EPF10K50RI240-4N
Intel
EPF10K50RI240-4N by Intel is a PLD with 2880 logic cells, 0.6 ns propagation delay, and 189 inputs. Ideal for industrial applications, it operates at -40 to 85 °C with a clock frequency of 62.89 MHz. The package style includes flatpack and heat sink/slug options in a square shape with gull wing terminals.
M4A5-32/32-7VNI48
Lattice Semiconductor
M4A5-32/32-7VNI48 by Lattice Semiconductor is a 32 macrocell EE PLD with 34 inputs and 32 I/O lines. It features a propagation delay of 7.5 ns, operates at a max clock frequency of 76.9 MHz, and has in-system programmability. Ideal for industrial applications requiring fast processing speeds and versatile I/O configurations.
XC95144XL-7TQ144I
Xilinx
XC95144XL-7TQ144I by Xilinx is a programmable logic device with 144 macro cells and 117 inputs/outputs. It operates at a max clock frequency of 138.88 MHz and is commonly used in industrial applications for its in-system programmability and low profile package style.
EPM9320LC84-15
EPM9320LC84-15 by Intel is a 320 macrocell EE PLD with 16ns propagation delay, operating at up to 117.6MHz clock frequency. It is ideal for applications requiring in-system programmability and features JTAG boundary scan test capability. The device supports a max supply voltage of 5.25V and has a package style of chip carrier, making it suitable for commercial temperature-grade projects.
XA2C64A-8VQG44Q
XA2C64A-8VQG44Q by Xilinx is a 64 macrocell FLASH PLD with 7.5 ns propagation delay, suitable for automotive applications. Operating at -40 to 125 °C, it features in-system programmability and JTAG boundary scan test capability. With a compact form factor of 10x10 mm and low power supplies of 1.5/3.3 V, it offers high performance in a small footprint for various electronic systems.
XC2C32A-4VQG44C
The Xilinx XC2C32A-4VQG44C is a 32 macrocell FLASH PLD with 33 I/O lines, operating at up to 450 MHz. It features a propagation delay of 4 ns and can be in-system programmable. Ideal for applications requiring high-speed processing and flexibility in design due to its programmable nature.
PALCE22V10-10JC
Cypress Semiconductor
PALCE22V10-10JC by Cypress Semiconductor is a programmable logic device with 22 inputs and 10 outputs. It has a propagation delay of 10 ns and operates at a max clock frequency of 76.9 MHz. This PLD is commonly used in applications requiring high-speed digital logic functions.
LC4064V-75TN100C
LC4064V-75TN100C by Lattice Semiconductor is a 3.3V EE PLD with 64 I/O lines, 7.5ns propagation delay, and 111MHz max clock frequency. Ideal for applications requiring in-system programmability, such as digital signal processing and control systems due to its low profile flatpack package style.
GAL22V10D-4LJN
GAL22V10D-4LJN by Lattice Semiconductor is a 5V CMOS PLD with 4ns propagation delay, 132 product terms, and 167MHz clock frequency. Ideal for PAL-type applications requiring EE PLDs in commercial extended temperature environments. It features 11 dedicated inputs, 10 I/O lines, and a square chip carrier package with J bend terminals.
ATF1504AS-10AU44
Atmel
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
EPM3032ATC44-7
Intel's EPM3032ATC44-7 is a 32 macrocell EE PLD with 34 I/O lines. It operates at up to 138.9 MHz clock frequency and has a propagation delay of 7.5 ns. Ideal for applications requiring in-system programmability and low-profile packaging in commercial temperature environments.
LC4512V-10TN176I
LC4512V-10TN176I by Lattice Semiconductor is a 512 macrocell EE PLD with 132 inputs and 128 I/O lines. Featuring a propagation delay of 10 ns, it operates at a max clock frequency of 86 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in industrial environments.
M4A5-64/32-10VNC
M4A5-64/32-10VNC by Lattice Semiconductor is a 64 macrocell EE PLD with 34 inputs and 32 I/O lines. Featuring a propagation delay of 10 ns, it operates at a max clock frequency of 62.5 MHz. Ideal for applications requiring programmable logic devices with in-system programmability and JTAG boundary scan test capabilities.
SLG46120V
Dialog Semiconductor
OT PLD; Form Of Terminal: NO LEAD; No. of Terminals: 12; Package Code: VQCCN; Package Shape: SQUARE; JTAG Boundary Scan Test: NO;
EPM7160STI100-10N
EPM7160STI100-10N by Intel is a 160 macrocell EE PLD with 10 ns propagation delay, suitable for industrial applications. It operates at a max clock frequency of 125 MHz and has 84 I/O lines, making it ideal for high-speed digital designs. With in-system programmability and JTAG boundary scan test capability, this PLD offers flexibility and ease of testing during development.
EPM1270F256C5N
EPM1270F256C5N by Intel is a programmable logic device (PLD) with 980 macro cells and 212 inputs/outputs. It uses CMOS technology and has a max supply voltage of 2.625V. This PLD is suitable for applications requiring in-system programmability and a fast propagation delay of 10ns.
EPF10K20RC240-4
Intel's EPF10K20RC240-4 is a PLD with 1152 logic cells, 0.6 ns propagation delay, and 67.11 MHz max clock frequency. Ideal for applications requiring high-speed processing and complex logic functions in commercial temperature environments. Features include 189 I/O lines, 4 dedicated inputs, and a flatpack package style with gull wing terminals.
XC95288XL-7TQ144I
XC95288XL-7TQ144I by Xilinx is a 288 macrocell FLASH PLD with 117 I/O lines, operating at up to 125 MHz. It features a propagation delay of 7.5 ns and can handle a max supply voltage of 3.6 V. Ideal for industrial applications requiring high-speed programmable logic devices with in-system programmability and JTAG boundary scan testing capabilities.
ATF16V8C-7SU
ATF16V8C-7SU by Microchip Technology is a PLD with 7.5ns propagation delay, 18 inputs, and 64 product terms. It is used in applications requiring high-speed processing, such as industrial control systems and communication equipment. The device operates at a max clock frequency of 100MHz and has a compact rectangular package style for surface mount assembly.
EPF10K20TC144-4N
Intel's EPF10K20TC144-4N is a PLD with 1152 logic cells, 0.6 ns propagation delay, and 102 inputs. It operates at 5V, has a max temp of 70°C, and uses CMOS technology. Ideal for applications requiring fast processing speeds and high input/output capabilities in commercial-grade environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
Altera
The EPM9320LC84-15 by Altera is a programmable logic device with 320 macro cells, a maximum supply voltage of 5.25V, and a propagation delay of 16ns. It uses CMOS technology and has a package shape of square. It is commonly used in applications that require configurable I/O operation with 3.3V or 5V.
EPM9320LC84-15N
EPM9320LI84-20
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
EPM9320ALC84-15
EPM9560RC208-15
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
EPM9320LI84-15
EPM9560GC280-15
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: PIN/PEG; No. of Terminals: 280; Package Code: PGA; Package Shape: SQUARE;
EPM9320LC84-20
EPM9320LI84-12
EPM9560GI280-15
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: PIN/PEG; No. of Terminals: 280; Package Code: PGA; Package Shape: SQUARE;
EPM9320ARC208-10N
EPM9320ALC84-7
EPM9320ARC208-15
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: HFQFP; Package Shape: SQUARE;
EPM9320ARC208-15C
EPM9320ABI356-10
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 356; Package Code: LBGA; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved