Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
Digiode
J2 Sourcing AB
Flip Electronics
Semicontronic
$12.000
$11.700
$11.640
AZTECH Wire
$14.890
$14.300
$14.010
$13.730
Ampacity Inc.
$16.000
Andel Nordic
$31.800
$22.257
One Stop Electronics
$32.000
MARBEL Systems
$36.555
Texas Native Microelectronics
$42.017
$36.975
Corohmni
$43.763
Kenton Components
$50.420
$44.370
Qasali Group International
$113.446
$99.832
Modulus Dynamics
$142.637
Microchip USA
$147.478
Authorized Procurement Solutions
Alle Elektronik GmbH
Glotronic Ltd.
Supply Digital
Vigor
Continental Prestige Electronics
Corphita
Perfect Parts
Bastille Electronics
A-Z Elektronik GmbH
Argo Parts USA
Programmable Logic Devices (PLD) EPF10K50ETI144-2N attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Logic Cells:
No. of I/O Lines:
Propagation Delay:
Technology:
Sub-Category:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Moisture Sensitivity Level (MSL):
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
EPF10K50ETI144-2N Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 01/Dec/2016 EOL 21/Nov/2016
PCN Design/Specification - Appearance Update 30/Mar/2015 Mult Series Software Chgs 26/Mar/2020
PCN Packaging - All Dev Pkg Chg 1/Aug/2018 Mult Dev Dessicant Chg 19/Jul/2019
PCN Other - Software Disc 06/Nov/2020
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
ABS25-32.768KHZ-1-T
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
EP1K50TI144-2N
Intel
EP1K50TI144-2N by Intel is a PLD with 2880 logic cells, 0.4 ns propagation delay, and 102 inputs/outputs. It operates on CMOS technology at a max clock frequency of 37.5 MHz. Ideal for industrial applications requiring high-speed processing and versatile I/O capabilities in a compact form factor.
5M1270ZF324C5N
The Intel 5M1270ZF324C5N is a programmable logic device (PLD) with 980 macro cells and a max clock frequency of 201.1 MHz. It is used for applications requiring in-system programmability and features a package style of grid array, low profile.
EPM570GT144C4N
Intel's EPM570GT144C4N is a 440 macrocell FLASH PLD with 116 I/O lines. It features a propagation delay of 7 ns and operates at a max supply voltage of 1.89 V. Ideal for applications requiring fast processing speeds and high input/output capabilities in programmable logic devices.
LC4256V-5TN144I
Lattice Semiconductor
LC4256V-5TN144I by Lattice Semiconductor is a 256 macrocell EE PLD with 110 inputs and 96 I/O lines. With a propagation delay of 5 ns and max clock frequency of 156 MHz, it's ideal for applications requiring fast processing speeds. Its compact square package shape and in-system programmability make it suitable for space-constrained designs.
5M570ZT144I5
Intel's 5M570ZT144I5 is a FLASH PLD with 114 I/O lines, operating at up to 118.3 MHz clock frequency. Featuring a propagation delay of 17.7 ns, it is ideal for industrial applications requiring high-speed data processing and low power consumption. With a compact square package shape and GULL WING terminals, this device offers versatile surface mount capabilities for efficient PCB integration.
5M240ZM100C5N
Altera
The Altera 5M240ZM100C5N is a programmable logic device with 192 macro cells, 14 ns propagation delay, and a maximum clock frequency of 118.3 MHz. It is a flash PLD that can be programmed in-system and has a package shape of square with a grid array, thin profile, fine pitch style. Its application includes output function using macrocells.
EPF10K30ATC144-3N
EPF10K30ATC144-3N by Intel is a PLD with 1728 logic cells, 0.9 ns propagation delay, and 102 inputs. It operates at a max frequency of 80 MHz and is ideal for applications requiring high-speed processing in commercial environments. With a low profile package style and fine pitch terminals, it offers versatility in design while maintaining reliable performance.
AT22V10-15DM
Atmel
AT22V10-15DM by Atmel is a UV PLD with 132 product terms, 11 dedicated inputs, and 10 I/O lines. It operates at a max clock frequency of 50 MHz and has a propagation delay of 15 ns. This PAL-type programmable logic device is commonly used in military-grade applications due to its MILITARY temperature grading.
Intel's 5M240ZM100C5N is a PLD with 192 macro cells, 79 I/O lines, and 118.3 MHz clock frequency. It uses CMOS technology, has in-system programmability, and supports JTAG boundary scan testing. Ideal for applications requiring fast processing speeds and high input/output capabilities.
ATF22V10C-15PU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
SLG46880VTR
Renesas Electronics
SLG46880VTR by Renesas Electronics is a 32-terminal PLD with 12 macro cells and 18 inputs. Operating b/w -40 to 85 °C, it has a max supply voltage of 5.5 V and min of 2.3 V. Ideal for applications requiring programmable ICs in compact spaces like consumer electronics or industrial control systems.
EPM3032ALC44-10N
The EPM3032ALC44-10N by Altera is a CMOS programmable logic device with 32 macro cells. It has a maximum clock frequency of 103.1 MHz and a propagation delay of 10 ns. This PLD is surface mountable and has a package shape of square. It is commonly used in applications requiring in-system programmability and output function of macrocell.
EPM7128SQC100-15
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
XC95144XL-10TQG144I
Xilinx
XC95144XL-10TQG144I by Xilinx is a PLD with 117 I/O lines, 144 macro cells, and 138.88 MHz clock frequency. Ideal for industrial applications, it offers in-system programmability and JTAG boundary scan testing capabilities. With a compact form factor of 20x20 mm and low profile design, it operates b/w -40 to 85°C temperatures.
LC4032ZC-75TN48I
LC4032ZC-75TN48I by Lattice Semiconductor is a 32 macrocell EE PLD with 36 inputs and 32 I/O lines. Featuring a propagation delay of 7.5 ns, it operates at a max clock frequency of 111 MHz. Ideal for applications requiring in-system programmability and JTAG boundary scan testing in various industries.
XC95288XL-10TQG144I
XC95288XL-10TQG144I by Xilinx is a PLD with 288 macro cells, 117 inputs/outputs, and 100 MHz clock frequency. Ideal for industrial applications, it features in-system programmability, JTAG boundary scan test support, and operates b/w -40 to 85°C.
LC4128ZE-7TN100I
LC4128ZE-7TN100I by Lattice Semiconductor is a 128 macrocell EE PLD with 7.5 ns propagation delay and 111 MHz max clock frequency. Ideal for applications requiring in-system programmability, it features 10 dedicated inputs, 64 I/O lines, and JTAG boundary scan test capability.
5M80ZE64I5N
The Intel 5M80ZE64I5N is a FLASH PLD with 64 macro cells and 54 I/O lines. It operates at a max clock frequency of 118.3 MHz, making it suitable for industrial applications requiring high-speed processing. With in-system programmability and JTAG boundary scan test capability, this CMOS device offers flexibility and ease of testing during development.
ATF22V10C-15JU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
ATF1504AS-10JU44
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPF10K10TI144-4N
The EPF10K10TI144-4N by Altera is a programmable logic device with 576 logic cells, propagation delay of 0.6 ns, and CMOS technology. It has 102 inputs and outputs, a maximum supply voltage of 5.25 V, and is surface mountable. This PLD is suitable for industrial applications.
EPF10K10TI144-4N by Intel is a PLD with 576 logic cells, 0.6 ns propagation delay, and 102 inputs. It is used in industrial applications requiring fast processing speeds and high I/O capabilities. The device features a low profile flatpack package with matte tin terminals for reliable performance in harsh environments.
EPF10K50RI240-4N
LOADABLE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: HFQFP; Package Shape: SQUARE;
EPF10K50RI240-4N by Intel is a PLD with 2880 logic cells, 0.6 ns propagation delay, and 189 inputs. Ideal for industrial applications, it operates at -40 to 85 °C with a clock frequency of 62.89 MHz. The package style includes flatpack and heat sink/slug options in a square shape with gull wing terminals.
EPF10K10QC208-4N
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
EPF10K10QC208-4N by Intel is a PLD with 576 logic cells, 0.6 ns propagation delay, and 134 inputs. Ideal for applications requiring high-speed processing and complex logic functions in commercial-grade environments. Features include 5.25 V max supply voltage, 67.11 MHz clock frequency, and flatpack fine pitch package style.
EPF10K10ATI144-3N
EPF10K50VRI240-4N
EPF10K100ARI240-3N
EPF10K10AQC208-3N
Intel's EPF10K10AQC208-3N is a PLD with 576 logic cells, 0.8 ns propagation delay, and 134 inputs/outputs. It operates at 80 MHz clock frequency, suitable for applications requiring high-speed processing in commercial environments. The device features a flatpack package style with gull wing terminals and matte tin finish.
EPF10K20TI144-4N
EPF10K50RC240-3N
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: HFQFP; Package Shape: SQUARE;
The EPF10K50RC240-3N by Altera is a programmable logic device with 2880 logic cells. It has a maximum supply voltage of 5.25V and operates at a maximum clock frequency of 66.67MHz. Its application includes use in loadable PLDs and registered output functions.
EPF10K50ETI144-2
EPF10K50ETI144-2 by Intel is a programmable logic device (PLD) with 2880 logic cells and a propagation delay of 0.6 ns. It is used in applications requiring high-speed processing, such as industrial automation and telecommunications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved