Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Chip Stock
Nova Conductors
Semtec, LLC
ACDS - Activité Composants Distribution Service
AZTECH Wire
$6.424
One Stop Electronics
$11.000
Semicontronic
$27.000
$26.325
$26.190
Ampacity Inc.
$29.000
Modulus Dynamics
$96.864
Component Stockers USA
$99.990
Texas Native Microelectronics
$151.671
$145.604
$141.054
$133.470
Qasali Group International
$409.512
Microchip USA
$1,249.615
Authorized Procurement Solutions
Continental Prestige Electronics
MARBEL Systems
Glotronic Ltd.
Argo Parts USA
Corphita
Vigor
Supply Digital
Kepictronics
Kenton Components
$148.292
Corohmni
Bastille Electronics
Programmable Logic Devices (PLD) EPF6024AQC240-2N attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Altera
Programmable IC Type:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Dedicated Inputs:
No. of Logic Cells:
No. of I/O Lines:
Maximum Clock Frequency:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Moisture Sensitivity Level (MSL):
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
EPF6024AQC240-2N Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 01/Dec/2016 EOL 21/Nov/2016
PCN Packaging - All Dev Pkg Chg 1/Aug/2018 Mult Dev Dessicant Chg 19/Jul/2019
PCN Other - Software Disc 06/Nov/2020
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
EPF10K10TI144-4N
Intel
EPF10K10TI144-4N by Intel is a PLD with 576 logic cells, 0.6 ns propagation delay, and 102 inputs. It is used in industrial applications requiring fast processing speeds and high I/O capabilities. The device features a low profile flatpack package with matte tin terminals for reliable performance in harsh environments.
EPF10K200SRC240-3N
Altera
LOADABLE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 240; Package Code: FQFP; Package Shape: SQUARE;
ATF16V8C-7JU-T
Microchip Technology
ATF16V8C-7JU-T by Microchip Technology is a 20-terminal PLD with 7.5ns propagation delay and 100MHz clock frequency, ideal for industrial applications. Featuring CMOS technology, it operates b/w -40 to 85°C with a supply voltage range of 4.75V to 5.25V, making it suitable for high-speed digital designs requiring FLASH PLD functionality.
EPM7064SLC44-10N
EPM7064SLC44-10N by Intel is a 64 macrocell EE PLD with 36 I/O lines, operating at up to 125 MHz. It features a propagation delay of 10 ns and can be in-system programmable. This Programmable Logic Device (PLD) is commonly used in commercial applications requiring fast processing speeds and versatile input/output configurations.
EPM7128BTC100-4N
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
LC4128ZC-75TN100E
Lattice Semiconductor
LC4128ZC-75TN100E by Lattice Semiconductor is a 128 macrocell EE PLD with 7.5 ns propagation delay, 74 inputs, and 64 I/O lines. Ideal for applications requiring in-system programmability, it features a max clock frequency of 111 MHz and operates b/w -40 to 130 °C.
5M1270ZT144A5N
Intel's 5M1270ZT144A5N is a PLD with 980 macro cells, 10ns propagation delay, and CMOS technology. Ideal for industrial applications due to its AEC-Q100 screening level and wide operating temperature range from -40°C to 105°C. Supports JTAG boundary scan test and in-system programmability for versatile use cases.
XC95144XL-10TQ144I
Xilinx
XC95144XL-10TQ144I by Xilinx is a 3.3V CMOS PLD with 117 I/O lines, 144 macro cells, and 81.3 MHz clock frequency. Ideal for industrial applications, it offers in-system programmability and JTAG boundary scan testing capabilities in a low-profile package with Gull Wing terminals.
M4A5-32/32-7VNI48
M4A5-32/32-7VNI48 by Lattice Semiconductor is a 32 macrocell EE PLD with 34 inputs and 32 I/O lines. It features a propagation delay of 7.5 ns, operates at a max clock frequency of 76.9 MHz, and has in-system programmability. Ideal for industrial applications requiring fast processing speeds and versatile I/O configurations.
5M570ZT100C5N
Intel's 5M570ZT100C5N is a FLASH PLD with 440 macro cells, 74 I/O lines, and a max clock frequency of 118.3 MHz. Ideal for applications requiring in-system programmability and fast propagation delay of 17.7 ns, such as high-speed digital designs and embedded systems development.
LCMXO2280C-3TN100I4W
LCMXO2280C-3TN100I4W by Lattice Semiconductor is a PLD with 2280 logic cells, 73 I/O lines, and 5.1 ns propagation delay. Ideal for applications requiring high-speed processing and versatile input/output configurations in compact designs.
XC2C64A-5CP56C
FLASH PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: BALL; No. of Terminals: 56; Package Code: LFBGA; Package Shape: SQUARE;
EPM3256ATC144-10N
The Intel EPM3256ATC144-10N is a programmable logic device with 256 macro cells. It has a propagation delay of 10 ns and operates at a max clock frequency of 95.2 MHz. This PLD is commonly used for in-system programming and output functions requiring macrocell capabilities.
EPM240ZM100C6N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: BGA; Package Shape: SQUARE;
ATF22V10C-15JU
Atmel
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
5M1270ZT144C5
Intel's 5M1270ZT144C5 is a FLASH PLD with 114 I/O lines, 201.1 MHz clock frequency, and 10 ns propagation delay. Ideal for applications requiring high-speed data processing and complex logic functions in compact electronic systems.
5M40ZM64I5N
Intel's 5M40ZM64I5N is a FLASH PLD with 30 I/O lines, 118.3 MHz clock frequency, and 14 ns propagation delay. Ideal for industrial applications requiring programmable logic devices in a compact square package with fine pitch grid array style.
GAL22V10D-4LJN
GAL22V10D-4LJN by Lattice Semiconductor is a 5V CMOS PLD with 4ns propagation delay, 132 product terms, and 167MHz clock frequency. Ideal for PAL-type applications requiring EE PLDs in commercial extended temperature environments. It features 11 dedicated inputs, 10 I/O lines, and a square chip carrier package with J bend terminals.
EPM9320LC84-15N
EPM9320LC84-15N by Intel is a 84-terminal EE PLD with 60 I/O lines, operating at up to 117.6 MHz clock frequency. It features a propagation delay of 16 ns and operates within a temperature range of 0-70°C. Ideal for applications requiring high-speed data processing in commercial environments.
ATF750CL-15XU
ATF750CL-15XU by Microchip Technology is a 5.5V EE PLD with 10 macro cells and 11 dedicated inputs. With a propagation delay of 15ns, it operates at temperatures from -40 to 85°C. Ideal for applications requiring high clock frequencies up to 44MHz in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EPF6024ATC144-2N
EPF6024ATC144-2N by Intel is a 3.3V LOADABLE PLD with 117 I/O lines, operating at up to 153 MHz. Its GULL WING terminals and FLATPACK package make it suitable for high-speed digital applications requiring macrocell outputs in a compact form factor. With a wide temperature range of 0-85°C, it's ideal for industrial automation and telecommunications systems.
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
EPF6024AQC240-2N
Intel's EPF6024AQC240-2N is a PLD with 1960 logic cells, 199 inputs/outputs, and 153 MHz clock frequency. It operates at 3.3V, CMOS technology, suitable for applications requiring high-speed processing in compact designs like consumer electronics or industrial control systems.
EPF6010ATC144-3N
EPF6024AQC208-3N
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
EPF6024AQC208-3N by Altera is a square-shaped, surface mount programmable logic device with 208 terminals. It operates at a supply voltage of 3.3V and has a maximum clock frequency of 133MHz. This PLD offers 4 dedicated inputs and 171 I/O lines, making it suitable for various applications.
EPF6024AQC240-3N
EPF6024AQC240-3N by Altera is a programmable logic device with 1960 logic cells, 199 inputs/outputs, 133 MHz clock frequency, and can be used as 24000 logic gates.
EPF6016AFC100-2
LOADABLE PLD; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 100; Package Code: LBGA; Package Shape: SQUARE;
EPF6016ATI100-2N
LOADABLE PLD; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Maximum Seated Height: 1.27 mm;
LOADABLE PLD; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Nominal Supply Voltage (V): 3.3;
EPF6016QC208-2N
EPF6016QC208-3N
EPF6016TC144-2
EPF6024AQC240-1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved