Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AOZ1021AIL by Alpha & Omega Semiconductor is a switching regulator with 8 terminals, operating temperature range of -40 to 85°C, and max output current of 5A. Ideal for industrial applications, it features pulse width modulation control and buck switcher configuration with a max switching frequency of 600 kHz.
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Connector Distribution Corp
1+ parts
100+ parts
1k+ parts
10k+ parts
Right Parts Inc.
Vyrian
LWI Electronics Inc
VNN
Nova Conductors
AZTECH Wire
$0.510
$0.490
$0.480
$0.470
Corohmni
$11.847
Aztec Data Supply Inc.
$15.965
GreenTree Electronics
Argo Parts USA
Authorized Procurement Solutions
Continental Prestige Electronics
Infinite Electronics LLP (Excess)
Kepictronics
Assy Fe
Microchip USA
Aranea Global
Advanced Electronics
The use of plastic/epoxy material makes the product lightweight and durable, ensuring long-term reliability.
Being surface mountable allows for easy and efficient PCB assembly, saving time and reducing manufacturing costs.
Having 8 terminals provides flexibility in connecting various components and peripherals to the switching regulator.
With a maximum output current of 5 A, this switching regulator is capable of powering a wide range of devices and circuits.
The nominal input voltage of 12 V makes it compatible with many standard power sources, increasing its versatility.
Switching Regulators & Controllers AOZ1021AIL attributes and parameters. Explore more Switching Regulators & Controllers devices from Alpha & Omega Semiconductor
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
AOZ1021AIL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 03/Jan/2017 EOL Rev 18/Apr/2017
Alpha and Omega Semiconductor is committed to excellence in design, manufacturing, and responsiveness to our customers through the continued development of new technologies, products and innovative solutions. We bring to the market devices designed to benefit our customers by meeting their product specific needs. Our mission is to bring value to our customers, shareholders and employees. We pride ourself in our expertise in all areas of power semiconductor technology and business operations. Our intellectual property and technical knowledge encompasses the latest advancements in the power semiconductor industry. AOS differentiates itself by integrating its Discrete and IC semiconductor process technology, product design, and advanced packaging know-how to develop high performance power management solutions. AOS's portfolio of products targets high-volume applications, including but not limited to portable computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
Shandong Yiguang Electronic Joint Stock
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Micropac Industries
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LTC3646IDE#PBF
Analog Devices
LTC3646IDE#PBF by Analog Devices is a current-mode switching regulator with a buck configuration. It operates b/w -40 to 125 °C and supports input voltages from 4V to 40V, providing a stable output of 5V. This small outline IC is ideal for automotive applications due to its high temperature grade and compact design.
LM2672M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS60403DBV
Texas Instruments
TPS60403DBV by Texas Instruments is a small outline, low profile switching regulator with 5 terminals. It operates at -40 to 85°C and has a max output current of 0.06A. Ideal for industrial applications requiring a min input voltage of 1.8V and max output voltage of -5.5V at a frequency of up to 300kHz.
TPS60403QDBVRQ1
TPS60403QDBVRQ1 by Texas Instruments is a small outline, low profile switched capacitor converter with a max output current of 0.06A and a max switching frequency of 250kHz. Ideal for automotive applications due to its wide temperature range and dual terminal position.
TPSM828222SILR
TPSM828222SILR by Texas Instruments is a switching regulator with 2A output current and 1.8V nominal output voltage, suitable for automotive applications. It operates b/w -40 to 125°C, with a max switching frequency of 4000 kHz. This MICROELECTRONIC ASSEMBLY package has a compact size of 2.5mm x 2mm x 1.1mm, making it ideal for space-constrained designs.
TPS54360DDAR
TPS54360DDAR by Texas Instruments is a switching regulator with a max output current of 3.5A and a max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with a min output voltage of 0.8V and supports pulse width modulation as the control technique. The package style is small outline, making it ideal for space-constrained designs.
LMR16006YDDCT
LMR16006YDDCT by Texas Instruments is a switching regulator with max output voltage of 55V, current-mode control, and max output current of 0.6A. Ideal for automotive applications due to its compact size (2.9mm x 1.6mm) and wide operating temperature range (-40°C to 125°C).
LM5116MHX/NOPB
LM5116MHX/NOPB by Texas Instruments is a switching controller with 20 terminals, operating at -40 to 150°C. It supports a max output current of 20A and has a control mode of current-mode PWM. Ideal for automotive applications due to its compact size, high efficiency, and wide input voltage range from 6V to 100V.
EMC2305-1-AP-TR
Standard Microsystems
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
L5973ADTR
STMicroelectronics
L5973ADTR by STMicroelectronics is a voltage-mode switching regulator with 2.3A output current, suitable for buck configuration applications. It operates within an input voltage range of 4.4V to 36V and features pulse width modulation control technique. This small outline IC in gull wing terminal form is designed for surface mount applications requiring efficient power management.
LMR14203XMK/NOPB
LMR14203XMK/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 34V and current of 0.3A, suitable for automotive applications due to its compact size and pulse width modulation control technique.
TPS60400DBVRG4
TPS60400DBVRG4 by Texas Instruments is a small outline, low profile switched capacitor converter with a max output current of 0.06A and a max switching frequency of 350kHz. It operates in industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring a nominal input voltage of 5V and a min output voltage of -5V.
LM3150MH/NOPB
LM3150MH/NOPB by Texas Instruments is a switching controller with 14 terminals, operating temperature range of -40 to 125°C, and max output current of 12A. It is ideal for automotive applications due to its hysteric current mode control technique and wide input voltage range from 6V to 42V. The compact rectangular package with small outline and heat sink makes it suitable for space-constrained designs.
TPS62740DSSR
TPS62740DSSR by Texas Instruments is a switching regulator with 12 terminals, operating b/w -40 to 85°C. It offers output voltage range of 1.8-3.3V and current up to 0.3A, suitable for industrial applications requiring efficient power management in compact spaces.
LM27313XMF/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM27313XMFX/NOPB
LM27313XMFX/NOPB by Texas Instruments is a switching regulator with a small outline, low profile package. It has a max operating temperature of 125°C and can handle input voltages from 2.7V to 14V. This regulator is commonly used in automotive applications for its pulse width modulation control technique and boost configuration.
LM5017MRE/NOPB
LM5017MRE/NOPB by Texas Instruments is a switching regulator with a max output current of 0.6A and a max output voltage of 90V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. This small outline package with dual terminals is ideal for space-constrained designs requiring efficient power management.
LM5163QDDARQ1
LM5163QDDARQ1 by Texas Instruments is a switching regulator with a max output current of 0.5A and max output voltage of 90V, ideal for automotive applications due to its AEC-Q100 screening level. It operates in temperatures ranging from -40°C to 150°C, making it suitable for harsh environments. The package style is small outline with low profile, perfect for space-constrained designs.
TPS54361DPRR
TPS54361DPRR by Texas Instruments is a switching regulator with a max output current of 3.5A and a max output voltage of 59V, suitable for industrial applications. It operates in current-mode control with a pulse width modulation technique, offering a wide input voltage range from 4.5V to 60V and a compact package style ideal for space-constrained designs.
MC34063AD
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AOZ1282CI
Alpha & Omega Semiconductor
AOZ1282CI by Alpha & Omega Semiconductor is a switching regulator with 1.2A output current, 540kHz max frequency, and PWM control mode. Ideal for industrial applications due to -40 to 85°C operating temp range and compact design with small outline package style.
AOZ1282CI-1
AOZ1282CI-1 by Alpha & Omega Semiconductor is a switching regulator with 6 terminals, operating b/w -40 to 85°C. It has a buck switcher configuration, supporting input voltages from 4.5V to 36V and output voltage up to 30.6V at a max current of 0.6A. Ideal for applications requiring low profile, high efficiency power management solutions.
AOZ1282CI-2
SWITCHING REGULATOR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
AOZ1280CI
AOZ1280CI by Alpha & Omega Semiconductor is a switching regulator with 1.2A output current and 1800 kHz max switching frequency. It operates b/w -40 to 85°C, ideal for industrial applications requiring current-mode control and pulse width modulation techniques in a small outline package.
AOZ1284PI
SWITCHING REGULATOR; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
AOZ1284PI-1
Switching Regulator or Controllers;
AOZ1281DI
AOZ1281DI by Alpha & Omega Semiconductor is an 8-terminal switching regulator with a max output current of 1.8A and max switching frequency of 1800 kHz. It operates in industrial temperature range (-40 to 85°C) and is ideal for applications requiring high efficiency power conversion in compact spaces.
AOZ1237QI-02
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 23; Package Code: HQCCN; Package Shape: SQUARE; Surface Mount: YES;
AOZ1237QI-01
Switching Regulator or Controllers; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
AOZ1283PI
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Control Mode: CURRENT-MODE;
AOZ1282DI
AOZ1057AIL
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
AOZ1050PI
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Operating Temperature: 85 Cel;
AOZ1051PI
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AOZ1022DI
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
AOZ1037PI
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AOZ1033AI
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AOZ1094AIL
AOZ1021AI
AOZ1073AIL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved