Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Terminal Finish: Tin/Lead (Sn/Pb); Height: 1.8 mm;
Median Price
$0.322
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.530
100+ parts
$0.263
1k+ parts
$0.201
10k+ parts
$0.157
DigiKey
$0.262
-
Newark
$0.185
Element14
$0.245
Farnell
$0.158
$0.121
EBV Elektronik
Digiode
$0.028
Vyrian
$0.029
Bristol Electronics
$0.750
$0.375
$0.150
$0.094
Dan-Mar Components
NAC Semi
$0.315
Chip Stock
R&J Components
ACDS - Activité Composants Distribution Service
LittleDiode
Nova Conductors
Corphita
$0.026
Decca Corp
$0.138
$0.135
$0.134
Perfect Parts
Continental Prestige Electronics
$0.168
$0.103
A-Z Elektronik GmbH
Alle Elektronik GmbH
Aranea Global
Glotronic Ltd.
Argo Parts USA
Supply Digital
Assy Fe
Visible LEDs HSMS-A100-L00J1 attributes and parameters. Explore more Visible LEDs devices from Agilent Technologies
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
HSMS-A100-L00J1 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - Mult Dev 04/Jul/2023
PCN Assembly/Origin - New Source 22/Nov/2021
Agilent supports scientists in 110 countries in cutting-edge life science research; patient diagnostics; and testing required to ensure the safety of water, food and pharmaceuticals. Our advanced instruments, software, consumables, and services enable our customers to produce the most accurate and reliable results as well as optimal scientific, economic, and operational outcomes. We play a role in advancing important research and testing, with our scientists creating some of the world's most leading-edge technology and our field engineers working side by side with customers to help them maximize productivity. We bring these solutions to a variety of markets, from pharma and diagnostics to applied materials and chemicals. Together with our customers, we’re bringing great science to life.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
BSS138-TP
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
Samsung
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
Multicomp Pro
HSMH-C150
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
TLHB4400
Vishay Intertechnology
TLHB4400 by Vishay Intertechnology is a 2.9mm single color LED with peak wavelength of 428nm, forward current of 0.02A, and luminous intensity of 15.0mcd. Ideal for applications requiring blue light emission in a compact form factor with a viewing angle of 60° and radial mounting feature.
HLMP-1790
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); T-code: T-1; Maximum Forward Voltage: 2.2 V; Viewing Angle: 50 deg;
VLMB1300-GS08
VLMB1300-GS08 by Vishay Intertechnology is a 1.1mm blue LED with peak wavelength of 468nm, forward current of 0.02A, and luminous intensity of 104.0mcd. Ideal for surface mount applications requiring a compact single color LED with built-in zener diode for reverse voltage protection.
155124M173200
Wuerth Elektronik & Kg
TRIPLE COLOR LED;
KP-2012CGCK
Kingbright Electronic
KP-2012CGCK by Kingbright Electronic is a 1.3mm GREEN LED with a peak wavelength of 574nm and 40.0mcd luminous intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C, making it suitable for various visible lighting needs.
LTST-C19HE1WT
Lite-on Technology
LTST-C19HE1WT by Lite-on Technology is a single color LED with diffused white lens. It has a max forward current of 0.03A and operates b/w -20°C to 80°C. Ideal for applications requiring blue, blue-green, orange-red light emission with a min luminous intensity of 130cd.
QTLP650C-7.TR
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
APT1608QBC/D
Kingbright Electronic's APT1608QBC/D is a 1.2mm BLUE LED with 0.03A current, 468nm peak wavelength, and 100.0mcd luminous intensity. Ideal for surface mount applications in electronics, displays, and indicator lights due to its water clear lens and 120° viewing angle.
TLDR5400
Telefunken Microelectronics
Visible LEDs; Lens Type: DIFFUSED; Height: 8.6 mm; Peak Wavelength (nm): 650; Maximum Forward Voltage: 2.2 V; Color At Wavelength: Red;
HLMP-3301
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7.0; Lens Type: DIFFUSED; Additional Features: HIGH RELIABILITY;
APG1608CGKC/T
APG1608CGKC/T by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with a peak wavelength of 574nm and max forward current of 0.03A. Ideal for applications requiring GREEN light, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
HSMZ-C190
Broadcom
HSMZ-C190 by Broadcom is a 1mm red LED with peak wavelength of 643nm. It has a max forward current of 0.025A and viewing angle of 170°. Ideal for surface mount applications in electronics, displays, and indicator lights due to its compact size and high luminous intensity.
150080VS75000
150080VS75000 by Wurth Elektronik is a single color LED with a peak wavelength of 572nm, ideal for applications requiring bright green light. With a size of 1.4mm and max forward current of 0.03A, it offers a viewing angle of 140° and nominal luminous intensity of 40.0mcd, suitable for surface mount configurations in various electronic devices.
TLHK5800
Vishay Telefunken
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2500.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Silver (Sn/Ag);
553-0311F
Dialight
Dialight's 553-0311F is a 3mm red LED array with 2 separate elements, each with built-in resistor. It has a peak wavelength of 650nm and max forward current of 0.02A. Ideal for applications requiring low luminous intensity and a viewing angle of 60°, such as indicator lights in electronic devices.
APT2012SGC
APT2012SGC by Kingbright Electronic is a 1.3mm SUPER BRIGHT GREEN LED with 0.025A forward current, emitting at 565nm peak wavelength. Ideal for surface mount applications, it offers a wide 120° viewing angle and operates b/w -40°C to 85°C temperatures.
CMD17-21VGC/TR8
Visual Communications Company
CMD17-21VGC/TR8 by Visual Communications Company is a 1.4mm GREEN LED with a peak wavelength of 570nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 140° and nominal luminous intensity of 10.0mcd.
QS103XXW24
Apem Components
Visible LEDs;
SML-LX0603GW-TR
Lumex
SML-LX0603GW-TR by Lumex is a 1mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.025A and viewing angle of 160°. Ideal for surface mount applications, this green LED operates b/w -25 to 85 °C, making it suitable for various lighting projects.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSMS-C170
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10; Lens Type: DIFFUSED; Maximum Forward Current: .02 A;
HSMS-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.02A and viewing angle of 170°. Ideal for applications requiring high efficiency red or orange light emission in surface mount configurations.
HSMS-C190
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMS-C190 by Broadcom is a 1mm SINGLE COLOR LED with peak wavelength of 630nm. It has max forward current of 0.02A and viewing angle of 170°. Ideal for applications requiring high efficiency red or orange light, it operates b/w -40 to 85 °C and has surface mounting feature.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.25; Lens Type: DIFFUSED; Configuration: SINGLE;
HSMS-C150
HSMS-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.025A and operates b/w -40 to 85°C. Ideal for applications requiring high efficiency red or orange light, with a viewing angle of 170° and surface mounting feature.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Configuration: SINGLE;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.25; Lens Type: DIFFUSED; Color: HIGH EFFICIENCY RED;
HSMS-C191
HSMS-C191 by Broadcom is a 1mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.02A and operates b/w -40 to 85°C. Ideal for applications requiring high efficiency red or orange light emission, such as in surface mount configurations.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMS-C120
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMS-C120 by Broadcom is a 1.2mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.02A and operates b/w -40 to 85°C. Ideal for applications requiring high efficiency red or orange light, it features surface mounting and clear untinted non-diffused lens type.
HSMS-A100-J00J1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Terminal Finish: Tin (Sn); No. of Functions: 1;
HSMS-A100-L00J1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Terminal Finish: Tin (Sn); Maximum Operating Temperature: 100 Cel;
HSMS-C110
HSMS-C110 by Broadcom is a single color LED with peak wavelength of 630nm. It has a max forward current of 0.025A and operates b/w -40 to 85°C. Ideal for applications requiring high efficiency red or orange light, with a viewing angle of 130° and surface mounting feature.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 11.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.75; Lens Type: DIFFUSED; Maximum Reverse Voltage: 5 V;
HSMS-A100-J80J2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.25; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 120 deg;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved