Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 70 Cel; Maximum Isolation Voltage: 2500 V; Maximum Response Time: .000025 s; Maximum On State Current: .06 A;
Median Price
$2.745
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$1.135
100+ parts
$1.078
1k+ parts
10k+ parts
-
Mouser Electronics
$2.710
$1.500
$1.200
$1.120
DigiKey
$1.516
$1.256
$1.143
Newark
$2.780
$1.530
$1.240
$1.140
Farnell
$3.214
$1.459
$1.317
Element14
$3.710
$2.070
$1.800
EBV Elektronik
Digiode
Nova Conductors
$1.097
Vyrian
Chip Stock
HZD GmbH
Prism Electronics
Schukat
$2.131
$2.044
Holdelec - ElecDif-Pro
Amalfi Trading
Halfin
ComSIT Distribution GmbH
ComSIT USA
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
Semi Source
Mil-Aero Solutions, Inc.
Aztec Data Supply Inc.
$0.281
Decca Corp
$0.960
$0.941
$0.931
Semicontronic
$0.936
Corphita
$1.022
Argo Parts USA
$1.092
Corohmni
$1.102
Advanced Electronics
Continental Prestige Electronics
$2.560
$1.160
$0.901
Component Stockers USA
$2.620
$1.340
$1.520
$1.640
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
GreenTree Electronics
Glotronic Ltd.
Metaverse IC Inc.
Speed Components Ltd (Excess)
CPlus Electronics
Kepictronics
RC Electronics
$1.090
$1.000
$0.970
Supply Digital
Authorized Procurement Solutions
Computer Components Inc. - USA
iodParts Technologies Inc.
Cyclops Electronics Ltd (Excess)
Assy Fe
Eastek
Optocoupler Transistor Outputs HCPL-0701-000E attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Agilent Technologies
Minimum Current Transfer Ratio:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Power Dissipation:
Maximum Response Time:
Sub-Category:
HCPL-0701-000E Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Mult Device Design Changes 10/Nov/2015 Molding Chg 08/Feb/2016
PCN Packaging - Multiple Devices Marking/Labeling 07/Aug/2013 Marking/Labeling Revision B 14/Jan/2014
Agilent supports scientists in 110 countries in cutting-edge life science research; patient diagnostics; and testing required to ensure the safety of water, food and pharmaceuticals. Our advanced instruments, software, consumables, and services enable our customers to produce the most accurate and reliable results as well as optimal scientific, economic, and operational outcomes. We play a role in advancing important research and testing, with our scientists creating some of the world's most leading-edge technology and our field engineers working side by side with customers to help them maximize productivity. We bring these solutions to a variety of markets, from pharma and diagnostics to applied materials and chemicals. Together with our customers, we’re bringing great science to life.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Weitronic Enterprise
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Electronic Transistors
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
4N25
Isocom
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Configuration: SINGLE; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 30 V; Nominal Current Transfer Ratio: 50 %;
PS2801-1-F3-A-L
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 100 %; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Dark Current: 100 nA;
CNY17-3
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A; Maximum Dark Current: 100 nA; Configuration: SINGLE;
PS2801-4-A
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 80 %; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Forward Current: .05 A; No. of Elements: 4;
4N27
North American Philips Discrete Products Div
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Maximum Forward Voltage: 1.5 V; JESD-609 Code: e0;
Vishay Telefunken
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 50 %;
LTV-827S-TA1-B
Lite-on Technology
The Lite-on Technology LTV-827S-TA1-B is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.05 A and operates b/w -30 to 100°C. Ideal for applications requiring high isolation voltage, low response time, and surface mounting feature.
MOCD223M
The Onsemi MOCD223M is a 2-channel optocoupler with Darlington output. It has a max forward current of 0.06A, min operating temp of -40°C, and max isolation voltage of 2500V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
4N35
Quality Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 30 V;
MOC223M
The Onsemi MOC223M is a single optocoupler with a Darlington output, featuring a max forward current of 0.06 A and an isolation voltage of 2500 V. With a min operating temperature of -40°C and mounting feature for surface mount applications, it is ideal for use in high-power electronic circuits requiring reliable signal isolation.
TLP290(SE(T
Toshiba
Toshiba's TLP290(SE(T optocoupler features a max forward current of 0.05A, 80V min collector-emitter breakdown voltage, and 3750V max isolation voltage. Ideal for AC input-transistor output applications with temp range -55 to 110°C.
PC817C
Sharp Corporation
Sharp Corporation's PC817C is a single optocoupler with max forward current of 0.05A, operating temp range -30 to 100°C, and isolation voltage of 5000V. It has a collector-emitter breakdown voltage of 35V, dark current at 100nA, and transfer ratio of 200%. Ideal for applications requiring high isolation and signal transfer in electronic circuits.
4N35SR2M
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 100 %; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e3;
4N35M
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; JESD-609 Code: e3; Configuration: SINGLE; Maximum Isolation Voltage: 7500 V;
TCMT1100
Vishay Intertechnology
Vishay Intertechnology's TCMT1100 is a single optocoupler with a max forward current of 0.06A and operating temperature range from -40°C to 100°C. With a min C-E breakdown voltage of 70V, it offers high isolation at 3750V making it ideal for surface mount applications requiring reliable signal transfer in harsh environments.
H11G2TVM
DARLINGTON OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 1000 %; Maximum Dark Current: 100 nA; Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V;
SFH615A-2
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: UL RECOGNIZED; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Dark Current: 50 nA;
TCET1100
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Nominal Current Transfer Ratio: 50 %; Maximum Dark Current: 100 nA; Configuration: SINGLE;
Optek Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: UL RECOGNIZED; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 3500 V; Minimum Collector-emitter Breakdown Voltage: 30 V;
TLP291(BLL-TP,SE(T
Toshiba's TLP291(BLL-TP,SE(T optocoupler features a single transistor output with max. forward current of 0.05A and min. CTR of 200%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting in temp range -55 to 110°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HCPL-181-000E
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Dark Current: 100 nA; Maximum Power Dissipation: .15 W; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
Broadcom
HCPL-181-000E by Broadcom is a SINGLE Optocoupler with TRANSISTOR OUTPUT. It has a Max Forward Current of 0.05A, Operating Temperature range from -55 to 100°C, and Isolation Voltage up to 3750V. Ideal for applications requiring high isolation and signal transfer in compact designs.
HCPL-181-00BE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Configuration: SINGLE; JESD-609 Code: e3; Maximum Forward Current: .05 A;
Broadcom's HCPL-181-00BE is a SINGLE optocoupler with a max forward current of 0.05A and min operating temp of -55°C, ideal for surface mount applications. It boasts a high isolation voltage of 3750V, fast response time of 18μs, and collector-emitter breakdown voltage of 80V, making it suitable for industrial control systems.
HCPL-181-00CE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum On State Current: .05 A; Maximum Operating Temperature: 100 Cel;
Broadcom's HCPL-181-00CE is a SINGLE optocoupler with 0.05A forward current, 100°C max temp, and 3750V isolation voltage. Ideal for applications requiring high-speed response time and surface mounting feature.
HCPL-181-00DE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Response Time: .000018 s; Maximum Power Dissipation: .15 W;
Broadcom's HCPL-181-00DE is a single optocoupler with a max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. Featuring a fast response time of 18μs, it operates b/w -55°C to 100°C and has a collector-emitter breakdown voltage of 80V.
HCPL-817-500E
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Nominal Current Transfer Ratio: 50 %; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE;
Broadcom's HCPL-817-500E is a SINGLE optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 5000V. It features a fast response time of 18μs and operates b/w -30°C to 100°C, making it suitable for various surface mount configurations in electronics.
HCPL2731
Rs Components
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .02 A; Maximum Power Dissipation: .1 W; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 3000 V;
Morrihan International
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Response Time: .00006 s; Maximum Isolation Voltage: 3000 V; Maximum Forward Current: .02 A;
HCPL-817-300E
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.4 V; Maximum Power Dissipation: .15 W;
Broadcom's HCPL-817-300E is a SINGLE optocoupler with max. forward current of 0.05A, ideal for applications requiring transistor output optocouplers. It offers a min. operating temp of -30°C and max. isolation voltage of 5000V, making it suitable for high-power circuits in various industries. With a response time of 0.000018s and matte tin terminal finish, this device ensures efficient performance and reliability in surface mount installations.
HCPL-181-06CE
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -55 Cel; Maximum Response Time: .000018 s;
Broadcom's HCPL-181-06CE is a single optocoupler with a max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a response time of 18μs and collector-emitter breakdown voltage of 80V, it's suitable for surface mount configurations in various electronic systems.
HCPL-0731-000E
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum On State Current: .06 A; Maximum Response Time: .00006 s; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 2500 V;
HCPL-817-30DE
Broadcom's HCPL-817-30DE is a single optocoupler with max. forward current of 0.05A, operating temp. range -30 to 100°C, and min. CTR of 50%. Ideal for applications requiring high isolation voltage (5000V), fast response time (18μs), and surface mounting feature.
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; No. of Elements: 1; Maximum Power Dissipation: .15 W; Minimum Current Transfer Ratio: 300 %;
HCPL-0701-300
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 2500 V; Maximum Operating Temperature: 70 Cel; Maximum Forward Voltage: 1.7 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved