Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CNY173SR2VM by Onsemi is a single optocoupler with max forward current of 0.06A, min transfer ratio of 100%, and max isolation voltage of 4170V. Ideal for applications requiring high-speed response times, such as in industrial automation systems or power control circuits.
Median Price
$0.311
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.092
100+ parts
$0.084
1k+ parts
$0.075
10k+ parts
-
Arrow
$0.295
$0.241
$0.222
$0.196
Farnell
$0.466
$0.233
Newark
$0.794
$0.402
$0.329
$0.316
Element14
$1.160
$0.588
$0.490
Flip Electronics (Authorized)
Verical
$0.227
DigiKey
$0.322
$0.303
Chip1Stop
$0.300
$0.289
$0.204
Digiode
$0.087
Nova Conductors
$0.269
TME
$0.530
$0.323
Bristol Electronics
$0.611
$0.226
$0.171
Flip Electronics
Chip Stock
Vyrian
NAC Semi
$0.848
$0.783
ComSIT Distribution GmbH
Dan-Mar Components
Micros
$0.164
ACDS - Activité Composants Distribution Service
Ampacity Inc.
$0.078
Semicontronic
$0.076
Corphita
$0.083
Advanced Electronics
Aztec Data Supply Inc.
$0.194
Argo Parts USA
$0.254
$0.246
Netroflash
Corohmni
$0.270
Continental Prestige Electronics
$0.695
$0.294
Perfect Parts
Eastek
$0.546
Metaverse IC Inc.
Authorized Procurement Solutions
TANS Electronics
A-Z Elektronik GmbH
SupplyDigital Components
Alle Elektronik GmbH
Supply Digital
Futuretech Components
Kulean Microsystems
UHIMA Technologies
Problanco Electronics
The single configuration makes this optocoupler easy to use and implement in various circuit designs.
With a high maximum forward current, this optocoupler can handle heavy loads without overheating.
Being a transistor output optocoupler, this product provides fast switching speeds and high output current drive capabilities.
With a maximum operating temperature of 100°C, this optocoupler can withstand high-temperature environments.
The low minimum operating temperature of -40°C ensures this optocoupler can function in cold conditions.
The TIN terminal finish provides excellent solderability and corrosion resistance for a reliable connection.
The low power dissipation of 0.15 watts ensures that this optocoupler operates efficiently without overheating.
With a minimum current transfer ratio of 100%, this optocoupler provides accurate and reliable signal transmission.
The low maximum dark current of 50 nanoamps ensures minimal leakage current when the optocoupler is off.
The TR packing method provides safe and secure packaging for transportation and storage.
With a fast maximum response time of 6 microseconds, this optocoupler delivers quick signal transmission.
The high minimum collector-emitter breakdown voltage of 70 volts ensures reliable operation in high voltage applications.
The high maximum isolation voltage of 4170 volts provides excellent electrical isolation between input and output circuits.
The surface mounting feature allows for easy installation and space-saving design.
With a low maximum forward voltage of 1.65 volts, this optocoupler minimizes power loss and energy consumption.
With a high maximum on-state current of 0.05 amps, this optocoupler can handle heavy loads with ease.
Optocoupler Transistor Outputs CNY173SR2VM attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Maximum Power Dissipation:
Maximum Response Time:
Sub-Category:
Terminal Finish:
CNY173SR2VM Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Fairchild Semiconductor
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Weitron Technology
Semiconductor Technology
TCMT4100T0
Vishay Intertechnology
Vishay Intertechnology's TCMT4100T0 is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.06A, operating temp range -40 to 100°C, and isolation voltage of 3750V. Ideal for applications requiring high isolation and signal transfer in compact designs.
PS2501L-1-F3-A
Nec Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Additional Features: UL RECOGNIZED; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 80 V; Nominal Current Transfer Ratio: 300 %;
CNY17-3
Lite-on Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Additional Features: UL APPROVED, VDE APPROVED;
4N35
Aborn Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 100 %; Maximum Isolation Voltage: 2500 V; Minimum Collector-emitter Breakdown Voltage: 30 V; Configuration: SINGLE; No. of Elements: 1;
TLP290(GB,SE(T
Toshiba
Toshiba's TLP290(GB,SE(T optocoupler features a max forward current of 0.05A and a collector-emitter breakdown voltage of 80V. With an isolation voltage of 3750V, it is ideal for AC input-transistor output applications requiring high reliability in temperatures ranging from -55°C to 110°C.
ILD206T
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; No. of Elements: 2; Minimum Current Transfer Ratio: 22 %;
TCMD1000
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .06 A;
FOD817B300W
FOD817B300W by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C. With a collector-emitter breakdown voltage of 70V, it is ideal for applications requiring high isolation voltage up to 5000V, such as industrial control systems and power supplies.
TLP293
Toshiba's TLP293 is a single optocoupler with max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a min C-E breakdown voltage of 80V and operating temperatures from -55°C to 125°C, it offers reliable performance in various circuits.
HMHA281R2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Configuration: SINGLE; Nominal Current Transfer Ratio: 50 %; Minimum Collector-emitter Breakdown Voltage: 80 V; JESD-609 Code: e3;
TLP293-4(GBTPR,E
Toshiba's TLP293-4(GBTPR,E is a 4-channel optocoupler with max. forward current of 0.05A and min. transfer ratio of 100%. Ideal for applications requiring high isolation voltage (3750V) and surface mounting feature, operating in temp range -55 to 125°C.
CNY17-3X007T
Vishay Intertechnology's CNY17-3X007T is a single optocoupler with max forward current of 0.06A, ideal for applications requiring transistor output optocouplers. With a min operating temp of -55°C and max temp of 100°C, it offers high isolation voltage of 5300V, making it suitable for surface mount configurations. Its nominal current transfer ratio is 70%, ensuring efficient performance in various electronic circuits.
TLP185(GB,SE
Toshiba's TLP185(GB,SE) is a single optocoupler with max. forward current of 0.05A and min. CTR of 100%. Ideal for applications requiring high isolation voltage (3750V), low dark current (80nA), and surface mounting feature. Operating temp range: -55 to 110°C.
SFH690BT-3030
Vishay Intertechnology's SFH690BT-3030 is an Optocoupler Transistor Output with a max forward current of 0.05A and isolation voltage of 3750V. Ideal for applications requiring surface mounting, it operates b/w -55°C to 100°C, offering a min current transfer ratio of 170%.
TLP293-4(TPE(T
Toshiba's TLP293-4(TPE(T is a transistor output optocoupler with max. forward current of 0.05A, operating temp. range from -55 to 125°C, and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable optical coupling in industrial electronics.
JANTX4N24A
Micropac Industries
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Dark Current: 100 nA; Minimum Collector-emitter Breakdown Voltage: 40 V; Maximum On State Current: .05 A; Maximum Response Time: .00002 s;
TCLT1003
Vishay Telefunken
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Dark Current: 100 nA; Minimum Current Transfer Ratio: 34 %; Configuration: SINGLE;
MOCD223VM
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SEPARATE, 2 CHANNELS; JESD-609 Code: e3; Additional Features: UL RECOGNIZED, VDE APPROVED;
TLP185(GB-TPL,SE
Toshiba's TLP185(GB-TPL,SE is a single configuration optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has an isolation voltage of 3750 V. This device is commonly used for surface mount applications requiring high voltage breakdown and low dark current.
LTV-816S-TA
The Lite-on Technology LTV-816S-TA is a single optocoupler with a max forward current of 0.05 A and collector-emitter breakdown voltage of 80 V. It has a min operating temperature of -50°C and max isolation voltage of 5000 V, making it ideal for applications requiring high voltage protection in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CNY17-3.
Vishay Intertechnology's CNY17-3 is a single optocoupler with a max forward current of 0.06A and collector-emitter breakdown voltage of 70V. Ideal for applications requiring high isolation voltage up to 5000V, such as industrial control systems and power supplies.
Quality Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 70 V; Minimum Operating Temperature: -55 Cel; Nominal Current Transfer Ratio: 100 %; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .09 A;
Motorola
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Power Dissipation: .15 W; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 70 V;
Vishay Intertechnology's CNY17-3 is a single optocoupler with max forward current of 0.06A, ideal for applications requiring high isolation voltage up to 5300V. With a min CTR of 100%, it operates b/w -55°C to 100°C, making it suitable for through-hole mounting in various electronic circuits.
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 3750 V; Maximum Dark Current: 100 nA;
Temic Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Additional Features: VDE APPROVED, UL RECOGNIZED, MICROPROCESSOR SYSTEM INTERFACE; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Nominal Current Transfer Ratio: 100 %; Maximum Isolation Voltage: 3750 V;
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A; Maximum Dark Current: 100 nA; Configuration: SINGLE;
Qt Optoelectronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .09 A; Nominal Current Transfer Ratio: 100 %; No. of Elements: 1; Maximum Dark Current: 50 nA;
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Configuration: SINGLE; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V; Minimum Operating Temperature: -55 Cel;
Broadcom
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 1.7 V; Maximum Forward Current: .06 A; Maximum Power Dissipation: .15 W;
Isocom Components
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum Forward Current: .06 A; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V;
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Response Time: .00001 s; Maximum Operating Temperature: 125 Cel; Minimum Current Transfer Ratio: 100 %; Maximum On State Current: .15 A;
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1; Additional Features: UL RECOGNIZED; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 70 V;
Everlight Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Additional Features: UL APPROVED; Maximum Forward Current: .06 A; Maximum Dark Current: 50 nA; No. of Elements: 1; Maximum Isolation Voltage: 5000 V;
CNY173
CNY173 by Fairchild Semiconductor is a SINGLE optocoupler with 0.06A forward current, 100°C max temp, and 70V min breakdown voltage. Ideal for applications requiring high isolation voltage of 7500V, low dark current of 50nA, and nominal transfer ratio of 100%.
General Instrument Optoelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Power Dissipation: .15 W; Maximum Forward Current: .09 A; Maximum Response Time: .00001 s; Minimum Current Transfer Ratio: 100 %;
North American Philips Discrete Products Div
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 1.5 V; Maximum Response Time: .00001 s; Maximum Forward Current: .09 A;
Isocom
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 100 %; No. of Elements: 1; Maximum Dark Current: 50 nA; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Current: .06 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Dark Current: 50 nA; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved