Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum On State Current: .06 A; Maximum Response Time: .00006 s; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 2500 V;
Median Price
$5.645
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$5.600
100+ parts
$3.130
1k+ parts
$2.900
10k+ parts
$2.750
Newark
$5.690
$3.380
$3.010
-
Farnell
$6.893
$3.460
$3.047
Element14
$8.120
$4.390
$3.890
Avnet
$2.243
$2.155
$2.144
Verical
$3.095
$3.001
EBV Elektronik
Nova Conductors
$2.755
Digiode
$3.258
Forefront Electronics and Design
$58.800
Chip Stock
Vyrian
ComSIT USA
DF Sales Co.
ACDS - Activité Composants Distribution Service
EPE Components Inc.
Bristol Electronics
ComSIT Distribution GmbH
J & M Industries LLC
Prism Electronics
Fibra_Brandt Electronic GMBH
Cyclops Electronics Ltd
Advanced Electronics
$0.523
$0.476
$0.429
Aztec Data Supply Inc.
$0.718
Decca Corp
$2.170
$2.127
$2.105
Semicontronic
$2.116
Corohmni
$2.733
Argo Parts USA
Netroflash
Corphita
$3.087
Continental Prestige Electronics
$5.310
$2.790
$2.150
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
Eastek
Glotronic Ltd.
Supply Digital
Metaverse IC Inc.
Futuretech Components
Assy Fe
Optocoupler Transistor Outputs HCPL-0731-000E attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Agilent Technologies
Minimum Current Transfer Ratio:
Maximum Forward Current:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Power Dissipation:
Maximum Response Time:
Sub-Category:
HCPL-0731-000E Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Mult Device Design Changes 10/Nov/2015 Molding Chg 08/Feb/2016
PCN Packaging - Marking/Labeling Revision B 14/Jan/2014 Multiple Devices Marking/Labeling 07/Aug/2013
Agilent supports scientists in 110 countries in cutting-edge life science research; patient diagnostics; and testing required to ensure the safety of water, food and pharmaceuticals. Our advanced instruments, software, consumables, and services enable our customers to produce the most accurate and reliable results as well as optimal scientific, economic, and operational outcomes. We play a role in advancing important research and testing, with our scientists creating some of the world's most leading-edge technology and our field engineers working side by side with customers to help them maximize productivity. We bring these solutions to a variety of markets, from pharma and diagnostics to applied materials and chemicals. Together with our customers, we’re bringing great science to life.
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Diodes Incorporated
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vicor
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
TLP281(GR)
Toshiba
Toshiba's TLP281(GR) is a single optocoupler with max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 2500V. With a min current transfer ratio of 50%, it operates b/w -55°C to 100°C, making it suitable for various electronic circuits and industrial control systems.
CNY17-3
North American Philips Discrete Products Div
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 1.5 V; Maximum Response Time: .00001 s; Maximum Forward Current: .09 A;
TLP521-4GB
Isocom Components
TLP521-4GB by Isocom Components is a 4-channel optocoupler with a max forward current of 0.05A and collector-emitter breakdown voltage of 55V. Ideal for applications requiring high isolation voltage up to 5300V, operating in temperatures ranging from -30°C to 100°C.
MOCD217VM
The Onsemi MOCD217VM is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A, min operating temp of -40°C, and max isolation voltage of 2500V. Ideal for applications requiring high current transfer ratio and surface mounting feature.
MOCD223MR2
Fairchild Semiconductor
DARLINGTON OUTPUT OPTOCOUPLER;
4N35M
Everlight Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Minimum Current Transfer Ratio: 100 %; Minimum Collector-emitter Breakdown Voltage: 80 V; Configuration: SINGLE; Maximum Dark Current: 50 nA;
MOC223VM
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 500 %; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Forward Current: .06 A;
CNY65B
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .075 A; Maximum Dark Current: 200 nA; Configuration: SINGLE; Additional Features: UL RECOGNIZED;
ILD217T
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; No. of Elements: 2; Maximum Forward Current: .03 A;
PS2811-1-F3-A-L
Renesas Electronics
Renesas Electronics PS2811-1-F3-A-L is a single optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 2500V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and nominal transfer ratio of 150%.
PS2501L-1-A
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 300 %; Maximum Forward Current: .08 A; Configuration: SINGLE; Maximum Isolation Voltage: 5000 V;
SFH6186-5T
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -55 Cel; Minimum Current Transfer Ratio: 250 %; Maximum Forward Voltage: 1.5 V; Maximum On State Current: .05 A;
MCT62
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .06 A; Nominal Current Transfer Ratio: 100 %; Additional Features: UL APPROVED, VDE APPROVED; Maximum Dark Current: 100 nA;
PS2801-4-A
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 80 %; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Forward Current: .05 A; No. of Elements: 4;
PS2811-1-F3-A-K
Nec Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Forward Current: .05 A; Maximum Dark Current: 100 nA; Maximum Isolation Voltage: 2500 V;
PS2811-1-F3-A
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 40 V; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 100 nA;
HMHA2801AR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Configuration: SINGLE; Maximum Forward Voltage: 1.3 V; Maximum Isolation Voltage: 3750 V;
TIL111M
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 110 Cel; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 80 V;
PS2501L-1-F3-A
California Eastern Laboratories
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Forward Current: .08 A; Minimum Operating Temperature: -55 Cel; Nominal Current Transfer Ratio: 300 %; Maximum Dark Current: 100 nA;
The Renesas Electronics PS2801-4-A is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -55°C to 100°C. With a collector-emitter breakdown voltage of 80V, it offers high isolation at 2500V making it ideal for applications requiring reliable signal transmission in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HCPL-181-000E
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Maximum Dark Current: 100 nA; Maximum Power Dissipation: .15 W; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
Broadcom
HCPL-181-000E by Broadcom is a SINGLE Optocoupler with TRANSISTOR OUTPUT. It has a Max Forward Current of 0.05A, Operating Temperature range from -55 to 100°C, and Isolation Voltage up to 3750V. Ideal for applications requiring high isolation and signal transfer in compact designs.
HCPL-181-00BE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Configuration: SINGLE; JESD-609 Code: e3; Maximum Forward Current: .05 A;
Broadcom's HCPL-181-00BE is a SINGLE optocoupler with a max forward current of 0.05A and min operating temp of -55°C, ideal for surface mount applications. It boasts a high isolation voltage of 3750V, fast response time of 18μs, and collector-emitter breakdown voltage of 80V, making it suitable for industrial control systems.
HCPL-181-00CE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum On State Current: .05 A; Maximum Operating Temperature: 100 Cel;
Broadcom's HCPL-181-00CE is a SINGLE optocoupler with 0.05A forward current, 100°C max temp, and 3750V isolation voltage. Ideal for applications requiring high-speed response time and surface mounting feature.
HCPL-181-00DE
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Response Time: .000018 s; Maximum Power Dissipation: .15 W;
Broadcom's HCPL-181-00DE is a single optocoupler with a max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. Featuring a fast response time of 18μs, it operates b/w -55°C to 100°C and has a collector-emitter breakdown voltage of 80V.
HCPL-817-500E
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Nominal Current Transfer Ratio: 50 %; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE;
Broadcom's HCPL-817-500E is a SINGLE optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 5000V. It features a fast response time of 18μs and operates b/w -30°C to 100°C, making it suitable for various surface mount configurations in electronics.
HCPL2731
Rs Components
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .02 A; Maximum Power Dissipation: .1 W; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 3000 V;
Morrihan International
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Response Time: .00006 s; Maximum Isolation Voltage: 3000 V; Maximum Forward Current: .02 A;
HCPL-817-300E
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Dark Current: 100 nA; Maximum Forward Voltage: 1.4 V; Maximum Power Dissipation: .15 W;
Broadcom's HCPL-817-300E is a SINGLE optocoupler with max. forward current of 0.05A, ideal for applications requiring transistor output optocouplers. It offers a min. operating temp of -30°C and max. isolation voltage of 5000V, making it suitable for high-power circuits in various industries. With a response time of 0.000018s and matte tin terminal finish, this device ensures efficient performance and reliability in surface mount installations.
HCPL-181-06CE
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -55 Cel; Maximum Response Time: .000018 s;
Broadcom's HCPL-181-06CE is a single optocoupler with a max forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a response time of 18μs and collector-emitter breakdown voltage of 80V, it's suitable for surface mount configurations in various electronic systems.
HCPL-0701-000E
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 70 Cel; Maximum Isolation Voltage: 2500 V; Maximum Response Time: .000025 s; Maximum On State Current: .06 A;
HCPL-817-30DE
Broadcom's HCPL-817-30DE is a single optocoupler with max. forward current of 0.05A, operating temp. range -30 to 100°C, and min. CTR of 50%. Ideal for applications requiring high isolation voltage (5000V), fast response time (18μs), and surface mounting feature.
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Maximum Isolation Voltage: 5000 V; No. of Elements: 1; Maximum Power Dissipation: .15 W; Minimum Current Transfer Ratio: 300 %;
HCPL0730A#500
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On State Current: .06 A; Minimum Current Transfer Ratio: 800 %; No. of Elements: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved