Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Construction: COAXIAL; Maximum Input Power (CW): 30 dBm; Additional Features: SMA-F, HIGH RELIABILITY; Characteristic Impedance: 50 ohm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Bisco
1+ parts
100+ parts
1k+ parts
10k+ parts
RF/Microwave Attenuators 3010-18 attributes and parameters. Explore more RF/Microwave Attenuators devices from Aeroflex/weinschel
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Maximum Voltage Standing Wave Ratio:
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
WTVA0500N07SMTF
Emc Technology & Florida Rf Labs
FIXED ATTENUATOR; Maximum Operating Frequency: 20000 MHz; Minimum Operating Frequency: 0 MHz; Nominal Attenuation: 5 dB; Maximum Operating Temperature: 150 Cel; Characteristic Impedance: 50 ohm;
3010-3
Cobham Plc
The Cobham Plc 3010-3 is a RF/Microwave Attenuator with max input power of 30 dBm, VSWR of 1.35, and nominal attenuation of 3 dB. It's a variable attenuator with construction in coaxial format, operating from -40 to 65°C suitable for frequencies b/w 0-2500 MHz.
2B-3
Api Technologies
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.15; Maximum Input Power (CW): 33.01 dBm; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=250W; Maximum Operating Frequency: 2500 MHz;
151-70
The Cobham Plc 151-70 is a COAXIAL VARIABLE ATTENUATOR with 70 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 1.35 Max VSWR. Ideal for RF/Microwave applications with a frequency range of 0-4000 MHz, it offers precise signal control in various systems. Operating temperatures range from -20°C to 75°C.
90-30-31
90-30-31 by Cobham Plc is a COAXIAL FIXED ATTENUATOR with 30 dB Nominal Attenuation, 46.99 dBm Max Input Power (CW), and 1.3 Max VSWR. Ideal for RF/Microwave applications, it operates from -55°C to 125°C within the frequency range of 0-18000 MHz.
3007-2
VARIABLE ATTENUATOR; Maximum Operating Temperature: 65 Cel; Nominal Attenuation: 2 dB; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -40 Cel;
66-10-23
Aeroflex/weinschel
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Terminal Finish: Gold (Au); Minimum Operating Temperature: -55 Cel; Construction: COAXIAL; Maximum Operating Frequency: 18000 MHz;
68-2-44
The Cobham Plc 68-2-44 is a RF/Microwave Attenuator with a max input power of 50 dBm and a max VSWR of 1.2. It has a nominal attenuation of 2 dB and operates in temperatures ranging from -55 to 100 °C. This fixed attenuator is ideal for applications requiring precise signal control in the frequency range of 0 to 4000 MHz.
HMC541LP3
Analog Devices
Analog Devices' HMC541LP3 is a RF/Microwave Attenuator with 10 dB Nominal Attenuation, 26.99 dBm Max Input Power, and 2.3 dB Max Insertion Loss. It operates from -40 to 85°C and has a frequency range of 0-5000 MHz. Ideal for variable attenuation in RF/microwave circuits with a characteristic impedance of 50 ohms.
ALM-38140-BLKG
Broadcom
ALM-38140-BLKG by Broadcom is a RF/Microwave Attenuator module with 42 dB attenuation and 3.7 dB insertion loss. It operates b/w 50 MHz to 4000 MHz, suitable for applications requiring variable attenuation in the range of 2.7V power supply.
PAT1220-C-10DB-T5
Susumu
The Susumu PAT1220-C-10DB-T5 is a 10 dB fixed attenuator with max input power of 20 dBm and VSWR of 1.3. Ideal for RF/Microwave applications, it operates from -55°C to 125°C with frequency range of 0-10000 MHz.
HMC472ALP4ETR
Hittite Microwave
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: LCC24,.16SQ,20;
46-1-21
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Package Body Material: METAL; Minimum Operating Temperature: -55 Cel; Terminal Finish: Gold (Au); Nominal Attenuation: 1 dB;
PSA-10
FIXED ATTENUATOR; Nominal Attenuation: 10 dB; JESD-609 Code: e4; Additional Features: HIGH RELIABILITY; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 31.76 dBm;
HMC468ALP3E
Analog Devices' HMC468ALP3E is a RF/Microwave Attenuator with 30 dBm CW input power, 7 dB nominal attenuation, and 1.4 dB max insertion loss. Ideal for applications requiring variable attenuation in the frequency range of 0-6000 MHz.
ATN3590-02
Skyworks Solutions
ATN3590-02 by Skyworks Solutions is a fixed attenuator with 2 dB nominal attenuation and 33.01 dBm max input power. Operating from -55°C to 150°C, it covers frequencies from 0 MHz to 40 GHz. Ideal for RF/microwave applications requiring precise signal control in a compact component design.
32-9.5
FIXED ATTENUATOR; JESD-609 Code: e4; Maximum Operating Frequency: 18000 MHz; Minimum Operating Temperature: -55 Cel; Minimum Operating Frequency: 0 MHz; Terminal Finish: GOLD;
87-7.5
FIXED ATTENUATOR; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 33.01 dBm; Additional Features: 2.92 MM-F; 2.92 MM-M, I/P POWER-MAX(PEAK)=500W; Construction: COAXIAL;
17-10
FIXED ATTENUATOR; Maximum Operating Temperature: 85 Cel; Maximum Voltage Standing Wave Ratio: 1.2; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 18000 MHz; Maximum Input Power (CW): 36.99 dBm;
HMC470LP3
HMC470LP3 by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 26.99 dBm Max Input Power (CW), and 2 dB Max Insertion Loss. It is a GAAS technology-based VARIABLE ATTENUATOR suitable for applications requiring precise signal attenuation in the frequency range of 0-3000 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved