Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Abracon's ASPI-0630LR-R47M-T15 is a shielded, surface mount fixed inductor with 0.47uH nominal inductance and 18A max rated current. Ideal for power applications, this general purpose inductor has a compact rectangular package (7.1mm x 6.6mm x 2.8mm) and operates b/w -55°C to 125°C.
Median Price
$0.593
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$0.073
100+ parts
$0.071
1k+ parts
-
10k+ parts
Chip1Stop
$0.374
Farnell
$0.624
$0.460
$0.384
$0.368
DigiKey
$0.740
$0.502
Mouser Electronics
$0.351
$0.336
$0.335
Future Electronics
$0.700
Master Electronics
$0.290
Verical
$0.359
Element14
$0.472
$0.466
$0.393
Nova Conductors
$0.417
VNN
NAC Semi
$1.270
Electro Sonic
Vyrian
Ampacity Inc.
$0.276
Advanced Electronics
$0.412
$0.375
$0.338
Continental Prestige Electronics
$0.409
Argo Parts USA
$0.404
Netroflash
Corohmni
$0.837
Perfect Parts
Allows for easy and convenient surface mounting on PCBs, saving space and simplifying assembly process.
Provides protection against electromagnetic interference, ensuring better performance in sensitive electronic circuits.
Dual-ended terminals allow for easy and secure connections, enhancing stability and reliability of the inductor.
Tested at a relatively high frequency, ensuring accurate and reliable performance in real-world applications.
Designed specifically for power applications, offering high current handling capabilities and low resistance.
Offers a suitable inductance value for various electronic circuits, providing the required impedance and energy storage.
Capable of handling high currents, making it ideal for power supply and high-power applications.
Low DC resistance results in minimal power loss and heat generation, improving overall efficiency of the circuit.
Alloy powder core provides high magnetic permeability and saturation levels, enhancing the inductor's performance.
Fixed Inductors ASPI-0630LR-R47M-T15 attributes and parameters. Explore more Fixed Inductors devices from Abracon
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
ASPI-0630LR-R47M-T15 Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - ASPI-0630LR 2-Mar-2022
Abracon is a trusted supplier of leading-edge and innovative electronic components including Frequency Control, Timing, Power, Magnetics, RF and Antenna solutions. Servicing world-class companies across the data communication, transportation, industrial, medical, consumer, aerospace, and defense industries, Abracon accelerates customers’ time-to-market by providing unmatched product solutions, technical expertise, and service excellence.
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bkc Semiconductors
ETQP4M220YFP
Panasonic
Panasonic ETQP4M220YFP is a shielded, dual-ended fixed inductor with 22uH nominal inductance. Ideal for power applications, it has a max rated current of 2.3A and operates b/w -40 to 150°C. This general-purpose inductor features metal composite core material and meets AEC-Q200 standard.
B82422A1103K100
TDK
The TDK B82422A1103K100 is a 10uH SMT inductor with 27 min Q factor, suitable for RF applications. It has a max operating temp of 150°C, 0.18A rated current, and self-resonance frequency of 25MHz. Ideal for general purpose use in automotive electronics due to AEC-Q200 compliance.
CM322522-100KL
Bourns
Bourns CM322522-100KL is a 10uH SMT inductor with 2.1 ohm DC resistance, ideal for RF applications. Featuring a max operating temperature of 125°C and Q measured at 2.52 MHz, it offers high quality factor and self-resonance frequency of 30 MHz. This general purpose inductor has dual-ended terminals and ferrite core, suitable for various electronic circuits.
DR127-150-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
IHLP3232CZER100M11
Vishay Intertechnology's IHLP3232CZER100M11 is a shielded fixed inductor with 10uH nominal inductance, 5.3A max current, and 12MHz self-resonance freq. Ideal for DC-DC converters, it operates b/w -55°C to 125°C. With SMT packaging and dual-ended terminals, it suits various general-purpose applications.
TLC/1A-101M-00
Fastron Electronics
TLC/1A-101M-00 by Fastron Electronics is a general purpose inductor with 100uH nominal inductance, 0.115 ohm DC resistance, and 20% tolerance. It has a toroidal construction, radial terminal placement, and operates b/w -55 to 115 °C. Ideal for applications requiring fixed inductors such as power supplies and filters due to its circular package shape and powdered iron core material.
XAL4030-472MEC
Coilcraft
Coilcraft XAL4030-472MEC is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 5.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 36MHz.
LQW15AN2N5C00D
Murata Manufacturing
LQW15AN2N5C00D by Murata is a wirewound chip inductor with 0.0025 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 15000 MHz. With dual-ended terminals and matte tin finish, it offers high quality factor at 250 MHz test frequency.
74438357047
Wuerth Elektronik & Kg
Wurth Elektronik 74438357047 is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 3.9A max rated current. Ideal for power applications, it features a rectangular package, IRON ALLOY core material, and operates b/w -40 to 125 °C.
2200LL-101-V-RC
Bourns 2200LL-101-V-RC is a shielded fixed inductor with 100uH nominal inductance, suitable for high current applications. It has a max rated current of 6.8A, DC resistance of 0.027 ohm, and operates b/w -55 to 125 °C.
5612
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Tolerance: 10 %;
5625
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Shape or Size Description: CYLINDRICAL PACKAGE;
LBM2016TR82JV
Taiyo Yuden
LBM2016TR82JV by Taiyo Yuden is a surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 0.82 uH, max operating temperature of 105°C, and self-resonance frequency of 250 MHz. Ideal for RF applications due to its high quality factor and general purpose design.
XAL6030-222MEC
Coilcraft XAL6030-222MEC is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 10A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring low DC resistance of 0.01397 ohm and self-resonance frequency of 30MHz.
IHLP3232DZER100M11
Vishay Intertechnology's IHLP3232DZER100M11 is a shielded, high current inductor with 10uH nominal inductance and 5.4A max rated current. Ideal for general purpose applications, this SMT inductor has a DC resistance of 0.0518 ohm and operates b/w -55°C to 125°C.
B82477-G4104-M
B82477-G4104-M by TDK is a shielded, surface mount fixed inductor with 100uH nominal inductance and 1.7A max rated current. Ideal for power applications, it features a dual-ended terminal placement and ferrite core material, operating b/w -55°C to 125°C.
MLZ1608N100LT000
MLZ1608N100LT000 by TDK is a 0603 SMT inductor with 10uH nominal inductance, 0.6 ohm DC resistance, and 20% tolerance. Ideal for general purpose applications, it operates b/w -55 to 125 °C with a max current of 0.3A.
33461
Hirel Systems
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Tolerance: 12 %; Shape or Size Description: RECTANGULAR PACKAGE;
MLZ2012M470WT000
MLZ2012M470WT000 by TDK is an 0805 SMT fixed inductor with 47uH nominal inductance, 3.7ohm DC resistance, and 0.17A max rated current. Ideal for general purpose applications, this shielded inductor operates b/w -55 to 125 °C and features a ferrite core material.
24101C
C&d Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Minimum Operating Temperature: -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ASPI-0504-101K-T
Abracon
Abracon's ASPI-0504-101K-T is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 0.52A max rated current. Ideal for power applications, this general purpose inductor has dual-ended terminals and operates b/w -40°C to 85°C.
ASPI-4030S-100M-T
Abracon's ASPI-4030S-100M-T is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.5A max rated current. Ideal for power applications, it features a nickel-zinc ferrite core, operates b/w -40 to 125°C, and has a self-resonance frequency of 21MHz.
ASPIAIG-S8050-220M-T
Abracon's ASPIAIG-S8050-220M-T is a shielded, surface mount fixed inductor with 22uH nominal inductance and 2.2A max rated current. Ideal for power applications, it operates b/w -40 to 125 °C and features a self-resonance frequency of 9 MHz.
ASPIAIG-S8050-680M-T
ASPIAIG-S8050-680M-T by Abracon is a surface mount, shielded fixed inductor with a nominal inductance of 68 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 1.45 A and a max operating temperature of 125 °C.
ASPI-0630LR-100M-T15
ASPIAIG-S8050-6R8M-T
Abracon's ASPIAIG-S8050-6R8M-T is a shielded, surface mount fixed inductor with 6.8uH nominal inductance and 4.2A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 19MHz and operates b/w -40°C to 125°C.
ASPIAIG-S8050-151M-T
ASPI-0630LR-220M-T15
ASPI-4030S-4R7M-T
Abracon's ASPI-4030S-4R7M-T is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 2A max rated current. Ideal for power applications, it features a nickel-zinc ferrite core, operates b/w -40 to 125°C, and has a self-resonance frequency of 31MHz.
ASPI-0403S-222M-T
Abracon's ASPI-0403S-222M-T is a shielded, surface mount fixed inductor with 2200uH nominal inductance. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C. With a compact size of 6.6x4.45x2.92mm, it offers 8.5 ohm DC resistance and can handle up to 0.1A current at a test frequency of 0.1MHz.
ASPIAIG-F1040-100M-T
ASPIAIG-S8050-3R3M-T
ASPI-0804T-102M-T
Abracon's ASPI-0804T-102M-T is a SMT fixed inductor with 1000uH nominal inductance, 3ohm DC resistance, and 0.3A max rated current. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 85°C.
ASPI-M2512-4R7M-T
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
ASPIAIG-S8050-2R2M-T
ASPI-0530HI-2R2M-T2
Abracon's ASPI-0530HI-2R2M-T2 is a shielded, surface mount inductor with 2.2uH nominal inductance and 5.5A max rated current. Ideal for power circuits, this general purpose inductor has a molded construction and operates b/w -55°C to 125°C.
ASPI-8040S-330M-T
ASPIAIG-F1040-3R3M-T
ASPI-1367-2R2M-T
ASPI-0630LR-R82M-T15
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved