Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
TPS40090RHDT
Texas Instruments
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
IT CAN ALSO OPERATE WITH CURRENT MODE
SWITCHING CONTROLLER
CURRENT-MODE
PULSE WIDTH MODULATION
15 V
4.5 V
12 V
S-PQCC-N28
e4
5 mm
2
1
28
85 Cel
-40 Cel
120 A
3.3 V
.7 V
PLASTIC/EPOXY
HVQCCN
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
260
Not Qualified
1 mm
YES
PHASE-SHIFT
1000 kHz
INDUSTRIAL
NICKEL PALLADIUM GOLD
NO LEAD
.5 mm
QUAD
30
TPS40091RHDR
VOLTAGE-MODE
LCC28,.2SQ,20
Switching Regulator or Controllers
1200 kHz
TPS5602IDBTRG4
TPS5602IDBTRG4 by Texas Instruments is a dual switching controller with a max output current of 3A and a control mode of current-mode. It operates in an industrial temperature grade range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in challenging environments. With a compact package style and surface-mount capability, this device offers flexibility and reliability in space-constrained designs.
DUAL SWITCHING CONTROLLER
HYSTERETIC CURRENT MODE
25 V
7 V
R-PDSO-G30
7.8 mm
3 A
1.2 V
TSSOP
TSSOP30,.25,20
RECTANGULAR
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.2 mm
PUSH-PULL
202.4 kHz
GULL WING
DUAL
4.4 mm
NCP3163BPWG
Onsemi
NCP3163BPWG by Onsemi is a 16-terminal switching regulator with voltage-mode control, operating b/w -40 to 85°C. It offers a max output current of 3.4A, supports buck-boost configuration, and has a max switching frequency of 300kHz. Ideal for industrial applications requiring efficient power management in compact spaces.
SWITCHING REGULATOR
40 V
2.5 V
R-PDSO-G16
e3
10.3 mm
16
3.4 A
HSOP
SOP16,.4
SMALL OUTLINE, HEAT SINK/SLUG
2.65 mm
BUCK-BOOST
300 kHz
MATTE TIN
1.27 mm
7.5 mm
NCP3163BPWR2G
NCP3163BPWR2G by Onsemi is a 16-terminal switching regulator with voltage-mode control, operating b/w -40 to 85°C. It supports a max output current of 3.4A and has a buck-boost switcher configuration with a max switching frequency of 300kHz. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
PTN04050AAD
PTN04050AAD by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 85°C, and max output current of 1A. It is ideal for industrial applications requiring a nominal input voltage of 5V, with a max switching frequency of 310kHz and package style in microelectronic assembly.
2.9 V
5 V
R-PDMA-T5
5
1 A
-3.3 V
-15 V
MICROELECTRONIC ASSEMBLY
NO
SINGLE
310 kHz
THROUGH-HOLE
PTN04050AAH
PTN04050AAH by Texas Instruments is a single switcher regulator with 5 terminals, operating at -40 to 85°C. It has a max output current of 1A and switching frequency of 310 kHz. Ideal for industrial applications requiring a min input voltage of 2.9V and max of 7V, with an output voltage range from -15V to -3.3V.
PTN04050AAST
PTN04050AAST by Texas Instruments is a switching regulator with 5 terminals, operating b/w -40 to 85°C. It has a max output current of 1A and operates at a frequency of up to 310 kHz. Ideal for industrial applications requiring a single switcher configuration within an input voltage range of 2.9V to 7V.
R-PDMA-X5
e0
3
TIN LEAD
UNSPECIFIED
PTN04050AAS
PTN04050AAS by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 85°C, and output current up to 1A. It is used in industrial applications for voltage conversion tasks due to its compact MICROELECTRONIC ASSEMBLY package style and high max switching frequency of 310 kHz.
235
Tin/Lead (Sn/Pb)
20
PTN04050AAZT
PTN04050AAZT by Texas Instruments is a switching regulator with max output current of 1A, max switching frequency of 310kHz, and min input voltage of 2.9V. Ideal for industrial applications requiring a compact MICROELECTRONIC ASSEMBLY package style and temp range from -40 to 85°C.
e1
TIN SILVER COPPER
PTN04050AAZ
PTN04050AAZ by Texas Instruments is a switching regulator with 1 function. It has a max output current of 1A and operates at temperatures ranging from -40°C to 85°C. It is commonly used in industrial applications requiring a single switcher configuration.
TPS65160APWPR
TPS65160APWPR by Texas Instruments is a switching regulator with 12V nominal voltage, 4.2A max output current, and 900 kHz max switching frequency. Ideal for industrial applications requiring efficient power management in a compact package.
ALSO CONTAINS BUCK REULATOR; ALSO HAS OUTPUT VOLTAGE RANGE UP TO 20 V
14 V
9.2 V
R-PDSO-G28
9.7 mm
-2 V
4.2 A
20 V
HTSSOP
TSSOP28,.25
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
12
Power Management Circuits
2 mA
900 kHz
.65 mm
UCD9112RHBR
UCD9112RHBR by Texas Instruments is a voltage-mode dual switching controller with a buck switcher config. It operates in an industrial temperature grade range from -40 to 85°C, with a max switching frequency of 1 MHz. This chip carrier package with 32 terminals is suitable for various power management applications.
3.46 V
3.14 V
S-PQCC-N32
32
LCC32,.2SQ,20
BUCK
UCD9112RHBT
UCD9112RHBT by Texas Instruments is a voltage-mode dual switching controller with a buck switcher config. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications. With a max switching frequency of 1000 kHz and input voltage range of 3.14-3.46 V, it offers efficient power management in compact designs.
CS51411EMNR2G
CS51411EMNR2G by Onsemi is a 3A BUCK switching regulator with PWM control. It operates b/w -40 to 85 °C, suitable for industrial applications. With a max input voltage of 40V and small outline package, it's ideal for compact designs.
CURRENT/VOLTAGE-MODE
R-PDSO-N18
6 mm
18
HVSON
SOLCC18,.2,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
296 kHz
BIPOLAR
TIN
MAX8569AEUT-T
Maxim Integrated
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ALSO OPERATES IN ADJUSTABLE MODE FROM 2V TO 5.5V
5.5 V
1.5 V
2 V
R-PDSO-G6
2.9 mm
6
1.5 A
LSSOP
TSOP6,.11,37
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.45 mm
Other Analog ICs
BOOST
BICMOS
.95 mm
1.625 mm
MAX8569BEUT-T
TPS51117RGYTG4
TPS51117RGYTG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 10A and a max operating temperature of 85°C. It operates using pulse width modulation control technique, suitable for industrial applications requiring precise voltage regulation in compact spaces. With a wide input voltage range from 1.8V to 28V, it is ideal for various power management solutions.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V
28 V
1.8 V
S-PQCC-N14
3.5 mm
14
10 A
.76 V
LCC14/18,.14SQ,20
550 kHz
Nickel/Palladium/Gold (Ni/Pd/Au)
NOT SPECIFIED
TPS51117RGYT
TPS51117RGYT by Texas Instruments is a VOLTAGE-MODE SWITCHING CONTROLLER with 10A output current, 5.5V max output voltage, and 550kHz max switching frequency. Ideal for industrial applications requiring efficient power management in compact spaces.
UC2879DWG4
UC2879DWG4 by Texas Instruments is a switching controller with 20 terminals, operating temperature range of -40 to 85°C, and max output current of 0.1A. It is ideal for industrial applications requiring a compact design and pulse width modulation control technique at a max switching frequency of 300kHz.
ALSO HAS CONTROL MODE OF IPK, ALSO HAS CONTROL TECHNIQUE OF RESONANT
11 V
R-PDSO-G20
12.8 mm
.1 A
SOP
SOP20,.4
SMALL OUTLINE
29 V
10.75 V
TPS61086DRCT
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
ALSO OPERATES IN ADJUSTABLE MODE FROM 2.8V TO 18.5V; ALSO HAS PFM CONTROL TECHNIQUE
6 V
2.3 V
S-PDSO-N10
3 mm
10
3.2 A
18.5 V
2.8 V
SOLCC10,.12,20
1500 kHz
TPS60132PWPRG4
TPS60132PWPRG4 by Texas Instruments is a small outline, heat sink switching regulator with 20 terminals. It operates b/w -40 to 85°C and has a max output current of 0.15A at a switching frequency of 450kHz. Ideal for industrial applications requiring a nominal input voltage of 3V and nominal output voltage of 5V.
SWITCHED CAPACITOR REGULATOR
5.4 V
2.7 V
3 V
6.5 mm
.15 A
TSSOP20,.25
DOUBLER INVERTER
450 kHz
TPS65111RGERG4
TPS65111RGERG4 by Texas Instruments is a SWITCHED CAPACITOR REGULATOR with input voltage range of 2.4-5.5V and output power supplies of 2.5/5V, operating at temperatures from -40 to 85°C. This SQUARE chip carrier is ideal for industrial applications requiring a compact, surface-mount solution with a max switching frequency of 520 kHz.
2.4 V
3.6 V
S-PQCC-N24
4 mm
24
VQCCN
LCC24,.16SQ,20
CHIP CARRIER, VERY THIN PROFILE
2.5/5
TRIPLER
520 kHz
TPS6734IDG4
TPS6734IDG4 by Texas Instruments is a current-mode switching regulator with 1.5A output, PWM control technique, and boost switcher configuration. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power conversion in compact spaces. The IC's small outline package with dual terminals and surface mount capability makes it suitable for various electronic devices.
R-PDSO-G8
4.9 mm
8
1.75 mm
170 kHz
3.905 mm
UC2572DG4
UC2572DG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 0.7A and max switching frequency of 200kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, with input voltage ranging from 4.2V to 35V.
35 V
4.2 V
.7 A
-1 V
-70 V
INVERTER
200 kHz
3.9 mm
UC2874DW-1G4
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
36 V
R-PDSO-G18
11.55 mm
SOP18,.4
UC2874DW-2G4
UC2874DW-2G4 by Texas Instruments is a switching controller with max output current of 1A and max input voltage of 36V. It operates in industrial temperature range (-40 to 85°C) using pulse width modulation control technique. Ideal for applications requiring efficient power management in compact spaces.
ADP1877ACPZ-R7
Analog Devices
ADP1877ACPZ-R7 by Analog Devices is a 32-terminal switching regulator with max output current of 20A and max switching frequency of 1725kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, using pulse width modulation control mode for efficient power management.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 0.9 V
14.5 V
2.75 V
S-XQCC-N32
20 A
.8 mm
1725 kHz
TPS2501DRCT
TPS2501DRCT by Texas Instruments is a switching regulator with 6A output current, 1075kHz max frequency, and 3V nominal input voltage. Ideal for boost applications in industrial settings due to its -40 to 85°C operating range and compact square package design.
PFM TECHNIQUE ALSO POSSIBLE
5.25 V
6 A
5.1 V
1075 kHz
PT7769N
PT7769N by Texas Instruments is a switching regulator with 31 terminals, operating b/w -40 to 85°C. It has a max output current of 40A and operates at a frequency of up to 400 kHz. Ideal for industrial applications requiring a nominal input voltage of 5V in a MICROELECTRONIC ASSEMBLY package style.
R-XSMA-T31
31
40 A
400 kHz
REG71050DDCTG4
The Texas Instruments REG71050DDCTG4 is a switching regulator with a max output current of 0.06A and a max operating temperature of 85°C. It has a nominal input voltage of 3.25V, making it suitable for industrial applications requiring stable 5V output voltage in compact designs with surface mount capabilities.
SWITCHED CAPACITOR CONVERTER
3.25 V
.06 A
1.1 mm
1.6 mm
REG71055DDCTG4
SWITCHED CAPACITOR CONVERTER; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
3.5 V
TPS62000YZGR
TPS62000YZGR by Texas Instruments is a switching regulator with 1.6A output current, 1000kHz max switching frequency, and 2-5.5V input voltage range. Ideal for industrial applications requiring efficient power management in a compact form factor.
PFM CONTROL TECHNIQUE IS ALSO POSSIBLE
R-XBGA-B12
2.25 mm
1.6 A
VFBGA
BGA12,3X4,20
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
.625 mm
MOS
BALL
BOTTOM
TPS62000YZGT
TPS62000YZGT by Texas Instruments is a switching regulator with 1.6A output current and 1000 kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85°C, with a compact rectangular package style suitable for surface mount assembly.
TPS62221DDCRG4
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
PFM MODE IS ALSO AVAILABLE
R-PDSO-G5
.4 A
1850 kHz
TPS62228DDCTG4
TPS62228DDCTG4 by Texas Instruments is a voltage-mode switching regulator with 5 terminals, operating b/w -40 to 85°C. It has a max output current of 0.4A and supports pulse width modulation control technique at a frequency of up to 1850 kHz. Ideal for industrial applications requiring compact design and efficient power management.
1.875 V
TSOP5/6,.11,37
UC2573NG4
The Texas Instruments UC2573NG4 is a voltage-mode switching controller with a max output current of 0.7A and a max switching frequency of 115kHz. It operates in an industrial temperature range from -40 to 85°C, making it suitable for various power management applications. The IC features through-hole terminal form and pulse width modulation control technique in an 8-terminal rectangular package style.
30 V
4.75 V
R-PDIP-T8
9.81 mm
DIP
DIP8,.3
IN-LINE
5.08 mm
115 kHz
2.54 mm
7.62 mm
NCP1523FCT2G
NCP1523FCT2G by Onsemi is a voltage-mode switching regulator with 1.2A output current, 3600kHz max switching frequency, and -40 to 85 °C operating temp range. Ideal for industrial applications requiring precise power management in compact spaces.
ALSO OPERATE IN PFM MODE
R-XBGA-B8
2.05 mm
1.2 A
BGA8,2X4,20
.655 mm
3600 kHz
Matte Tin (Sn)
40
1.05 mm
NCP1595AMNR2G
NCP1595AMNR2G by Onsemi is a current-mode switching regulator with max output current of 6.1A and max switching frequency of 1130kHz. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power management in compact spaces. The IC features pulse width modulation control technique and buck switcher configuration, making it suitable for various electronic devices.
4 V
S-PDSO-N6
6.1 A
SOLCC6,.11,37
1130 kHz
NCP1595MNR2G
NCP1595MNR2G by Onsemi is a current-mode switching regulator with max output current of 6.1A and max switching frequency of 1130kHz. It operates in industrial temperature range, suitable for buck configuration applications requiring precise pulse width modulation control. The IC has small outline package with matte tin finish, making it ideal for space-constrained designs.
NCP5214AMNR2G
NCP5214AMNR2G by Onsemi is a voltage-mode switching controller with 3A output current, 460kHz max switching frequency, and PWM control technique. Ideal for industrial applications requiring a compact design with a small outline package style and wide input voltage range of 4.5V to 24V.
24 V
R-XDSO-N22
22
SOLCC22,.2,20
460 kHz
L6730C
STMicroelectronics
L6730C by STMicroelectronics is a compact switching regulator with a max output current of 20 A and operates in voltage-mode control. It supports input voltages from 1.8 V to 14 V, making it ideal for industrial applications. With a max switching frequency of 1 MHz, it ensures efficient power management.
L6731D
L6731D by STMicroelectronics is a compact switching regulator with a max output current of 20 A and operates in voltage-mode control. It supports input voltages from 1.8 V to 14 V, making it ideal for industrial applications. Its small outline design ensures efficient thermal management and space-saving integration.
TSSOP16,.25
500 kHz
NCP5214MNR2G
NCP5214MNR2G by Onsemi is a VOLTAGE-MODE SWITCHING CONTROLLER with 2.4A output current, 460 kHz switching frequency, and 12V nominal input voltage. It is ideal for industrial applications requiring efficient power management in a small outline package with surface mount capability.
R-PDSO-N22
2.4 A
TPS40101RGER
TPS40101RGER by Texas Instruments is a VOLTAGE-MODE SWITCHING CONTROLLER with 20A output current, 1000 kHz switching frequency, and -40 to 85 °C operating temperature range. Ideal for industrial applications requiring efficient power management in a compact CHIP CARRIER package.
18 V
.69 V
TPS40101RGET
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
TPS62001DGSRG4
TPS62001DGSRG4 by Texas Instruments is a small outline switching regulator with 1.6A output current, 1000 kHz max switching frequency, and -40 to 85°C operating temp range. Ideal for industrial applications requiring efficient power management in tight spaces.
S-PDSO-G10
TSSOP10,.19,20
UC2827N-1G4
UC2827N-1G4 by Texas Instruments is a 24-terminal switching controller with voltage-mode control, operating b/w -40 to 85°C. It offers a max output current of 1A at a frequency of up to 500 kHz. Ideal for industrial applications requiring pulse width modulation in push-pull configuration.
CAN ALSO WORK IN CURRENT MODE
9.5 V
R-PDIP-T24
31.75 mm
DIP24,.6
15.24 mm
© 2023 All rights reserved
