Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
NCP1247BD100R2G
Onsemi
NCP1247BD100R2G by Onsemi is a switching controller with current-mode control technique, operating at -40 to 125 °C. It has a max input voltage of 28V and a max switching frequency of 100 kHz, making it suitable for automotive applications. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
SWITCHING CONTROLLER
CURRENT-MODE
PULSE WIDTH MODULATION
28 V
11 V
R-PDSO-G7
e3
4.9 mm
1
7
125 Cel
-40 Cel
PLASTIC/EPOXY
SOP
SOP7/8,.25
RECTANGULAR
SMALL OUTLINE
260
Not Qualified
1.75 mm
Switching Regulator or Controllers
YES
100 kHz
AUTOMOTIVE
TIN
GULL WING
1.27 mm
DUAL
30
3.9 mm
NCP1247DD100R2G
NCP1247DD100R2G by Onsemi is a switching controller with current-mode control technique. It operates b/w -40 to 125 °C, suitable for automotive applications. With a max input voltage of 28V and a switching frequency of 100 kHz, it offers efficient power regulation in a small outline package.
MCP19110-E/MJ
Microchip Technology
MCP19110-E/MJ by Microchip is a current-mode switching controller with PWM control technique. It operates in automotive grade temperature range (-40 to 125°C) and supports buck switcher configuration. With a wide input voltage range (4.5-32V), it is ideal for various applications requiring high switching frequency up to 1600 kHz.
32 V
4.5 V
12 V
S-PQCC-N24
4 mm
24
3.6 V
.5 V
HVQCCN
LCC24,.16SQ,20
SQUARE
CHIP CARRIER
TS 16949
.9 mm
BUCK
1600 kHz
MATTE TIN
NO LEAD
.5 mm
QUAD
40
MCP19111-E/MQ
MCP19111-E/MQ by Microchip is a current-mode switching controller with PWM control technique. It operates in automotive grade temperature range (-40 to 125°C) and supports buck switcher configuration. With a wide input voltage range (4.5-32V), it is ideal for various applications requiring precise power regulation at high switching frequency of up to 1600 kHz.
S-PQCC-N28
5 mm
28
LCC28,.2SQ,20
1 mm
MCP19111T-E/MQ
MCP19111T-E/MQ by Microchip is a current-mode switching controller with PWM control technique. It operates in automotive grade temperature range (-40 to 125°C) and supports buck switcher configuration. With a wide input voltage range (4.5-32V), it's ideal for various applications requiring high switching frequency up to 1600 kHz.
NCP1937A3DR2G
NCP1937A3DR2G by Onsemi is a current-mode switching regulator with 17 terminals. It operates b/w -40 to 125 °C, suitable for automotive applications. With a control technique of resonant control, it accepts input voltages from 9V to 30V and has a small outline package style.
POWER FACTOR CONTROLLER
RESONANT CONTROL
30 V
9 V
R-PDSO-G17
9.9 mm
17
LSSOP
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
1.7 mm
Matte Tin (Sn) - annealed
NCP1937B2DR2G
NCP1937B2DR2G by Onsemi is a current-mode switching regulator with 17 terminals, operating b/w -40 to 125 °C. It features a small outline package style and matte tin terminal finish. Ideal for automotive applications, it offers resonant control technique and supports input voltage range of 9-30 V.
LM27403SQX/NOPB
Texas Instruments
LM27403SQX/NOPB by Texas Instruments is a 24-terminal switching controller with VOLTAGE-MODE control mode. It operates b/w -40 to 125 °C, supporting input voltages from 3-20 V and output currents up to 30 A. Ideal for automotive applications due to its compact SQUARE package style and BUCK switcher configuration.
ADJUSTABLE OUTPUT MODE FROM 0.6 TO 18.6V
VOLTAGE-MODE
20 V
3 V
S-XQCC-N24
30 A
19 V
.6 V
UNSPECIFIED
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
.8 mm
1200 kHz
NCP1077P100G
NCP1077P100G by Onsemi is a switching controller with current-mode control, operating b/w -40 to 125°C. It has a max switching frequency of 100 kHz and nominal input voltage of 8V. This rectangular package with 7 terminals is ideal for automotive applications due to its matte tin finish and through-hole terminal form.
8 V
R-PDIP-T7
9.59 mm
DIP
DIP7/8,.3
IN-LINE
5.33 mm
NO
THROUGH-HOLE
2.54 mm
7.62 mm
TPS43330AQDAPRQ1
TPS43330AQDAPRQ1 by Texas Instruments is an AEC-Q100 rated switching regulator with a max output current of 6A and max operating temp of 125°C. Ideal for automotive applications, it offers a wide input voltage range from 2V to 40V and supports up to three outputs.
DUAL SWITCHING CONTROLLER
40 V
2 V
R-PDSO-G38
e4
3
6 A
.9 V
TSSOP
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
AEC-Q100
600 kHz
NICKEL PALLADIUM GOLD
.65 mm
TPS43337QDAPRQ1
TPS43337QDAPRQ1 by Texas Instruments is a dual switching controller with 6A max output current, 600kHz max switching frequency, and -40 to 125°C operating temperature range. Ideal for automotive applications due to AEC-Q100 screening level and compact design with small outline package style.
ALSO OPERATES IN PFM MODE; ALSO HAS 3.4V, 7V, 8.85V AND 10V
CURRENT/VOLTAGE-MODE
13 V
12.5 mm
38
10 V
1.235 V
HTSSOP
TSSOP38,.32
1.2 mm
BUCK-BOOST
6.1 mm
TCV7104FN(TE85L,F)
Toshiba
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: VSOF; Package Shape: RECTANGULAR; Surface Mount: YES;
ADJUSTABLE OUTPUT VOLTAGE FROM 0.8V
SWITCHING REGULATOR
5.5 V
2.7 V
5 V
R-PDSO-F8
2.9 mm
8
2 A
VSOF
FL8,.1,25
SMALL OUTLINE, VERY THIN PROFILE
.85 mm
1800 kHz
CMOS
FLAT
2.4 mm
TCV7106FN(TE85L,F)
5.6 V
3.3 V
650 kHz
HPA02246QRTERQ1
Texas Instruments HPA02246QRTERQ1 is a 16-terminal switching regulator with a max output voltage of 4.5V and current of 15.3A. Ideal for automotive applications, it operates b/w -40 to 125°C, using pulse width modulation control at up to 2000 kHz frequency.
6 V
2.95 V
S-PQCC-N16
3 mm
16
15.3 A
.8 V
LCC16,.12SQ,20
2000 kHz
TPS65279RHHT
TPS65279RHHT by Texas Instruments is a dual switching controller with 5A max output current, operating at -40 to 125°C. It features pulse width modulation control mode, BUCK switcher config, and 1600 kHz max switching frequency. Ideal for automotive applications due to its nickel palladium gold finish and compact chip carrier package style.
ADJUSTABLE OUTPUT MODE 0.6 TO 9V
18 V
S-PQCC-N36
6 mm
2
36
5 A
15 V
LMR12007XMKX
LMR12007XMKX by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It offers a max output current of 2.3A and a max output voltage of 16V, suitable for automotive applications due to its BICMOS technology and pulse width modulation control mode.
ALSO OPERATES IN ADJUSTABLE MODE FROM 1.25 TO 16V
R-PDSO-G6
6
2.3 A
16 V
1.25 V
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.1 mm
BICMOS
Matte Tin (Sn)
.95 mm
NOT SPECIFIED
1.6 mm
LMR12007YMKX
LMR12007YMKX by Texas Instruments is a small outline switching regulator with 6 terminals, operating b/w -40 to 125°C. It features a current-mode control technique, BUCK switcher configuration, and can handle up to 2.3A output current. Ideal for automotive applications due to its compact size and high efficiency at a max frequency of 1600kHz.
ADP5033ACBZ-5-R7
Analog Devices
ADP5033ACBZ-5-R7 by Analog Devices is a switching regulator with 16 terminals, operating temperature range of -40 to 125°C, and max output current of 0.8A. Ideal for automotive applications due to its BICMOS technology, PWM control technique, and buck switcher configuration.
ALSO OPERATES AS LDO REGULATOR, ALSO AVAILABLE VOUT=3.3
2.3 V
S-PBGA-B16
e1
2 mm
.8 A
1.8 V
VFBGA
BGA16,4X4,20
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
.66 mm
3500 kHz
TIN SILVER COPPER
BALL
BOTTOM
LM34919CQTLX/NOPB
Texas Instruments' LM34919CQTLX/NOPB is a switching regulator with 12 terminals, operating b/w -40 to 125°C. It offers a voltage output range of 2.5-45V and current mode control, suitable for automotive applications due to its thin profile and high switching frequency of 2600 kHz.
50 V
R-PBGA-B12
2.025 mm
12
.6 A
45 V
2.5 V
BGA12,3X4,20
.675 mm
2600 kHz
1.814 mm
LM5121QMHX/NOPB
LM5121QMHX/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C and supports input voltages from 3V to 65V. With a max output voltage of 100V and a compact package style, it is ideal for automotive applications requiring high efficiency and precise voltage regulation.
SEATED HGT-NOM, OUTPUT VOLTAGE UP TO 100 V
65 V
R-PDSO-G20
6.5 mm
20
100 V
TSSOP20,.25
1000 kHz
4.4 mm
TPS40490MHRHDR
TPS40490MHRHDR by Texas Instruments is a VOLTAGE-MODE SWITCHING CONTROLLER with BUCK switcher config. It operates b/w -40 to 150 °C, suitable for AUTOMOTIVE applications. With a max switching frequency of 5400 kHz and input voltage range from 6V to 60V, it offers efficient power management in compact form factor.
60 V
48 V
150 Cel
5400 kHz
TPS40490MHRHDT
TPS40490MHRHDT by Texas Instruments is a VOLTAGE-MODE SWITCHING CONTROLLER with BUCK switcher config. It operates b/w -40 to 150 °C, suitable for AUTOMOTIVE applications. With a max switching frequency of 5400 kHz and input voltage range from 6V to 60V, it offers high performance in a compact CHIP CARRIER package.
TPS54340QDDAQ1
TPS54340QDDAQ1 by Texas Instruments is a switching regulator with a max output current of 6.8A and a control mode of current-mode PWM. Ideal for automotive applications, it has a wide input voltage range from 4.5V to 42V and operates at temperatures ranging from -40°C to 125°C.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 58.8V
42 V
R-PDSO-G8
6.8 A
58.8 V
HLSOP
SOP8,.25
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
2500 kHz
NICKEL PALLADIUM GOLD SILVER
TPS54360QDDAQ1
TPS54360QDDAQ1 by Texas Instruments is a switching regulator with a max output current of 6.8A and a control technique of pulse width modulation. It operates in automotive applications, has a wide input voltage range from 4.5V to 60V, and features a compact package style for space-constrained designs.
TPS62087RLTT
TPS62087RLTT by Texas Instruments is a switching regulator with a max output current of 3A and a max switching frequency of 2400kHz. It operates in automotive-grade temperatures (-40 to 125°C) and has a buck switcher configuration. Ideal for applications requiring precise voltage control in compact spaces.
ALSO OPERATES IN PFM CONTROL TECHNIQUE, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 6V
S-PDSO-N7
3 A
VSON
SOLCC7,.08,24/20
2400 kHz
Nickel/Palladium/Gold (Ni/Pd/Au)
TPS65301QPWPRQ1
TPS65301QPWPRQ1 by Texas Instruments is a switching regulator with 24 terminals, operating voltage of 6-27V, and output current of 1.2A. Ideal for automotive applications due to AEC-Q100 screening level and compact design with small outline package style.
14 V
R-PDSO-G24
7.8 mm
4
1.2 A
5.7 V
1.2 V
5.45 V
TSSOP24,.25
6/27
Power Management Circuits
3000 kHz
TPS65580PWP
TPS65580PWP by Texas Instruments is a switching regulator with 20 terminals, operating temperature range of -40 to 125°C, and output current up to 2.5A. Ideal for automotive applications due to its compact size, PWM control technique, and buck switcher configuration.
PEAK CURRENT LIMIT 3.4 AND 3.6 AMP OUTPUT 1 AND 3; OUTPUT VOLTAGE RANGE 0.76 V TO 7.0 V
2.5 A
7 V
.76 V
800 kHz
TPS65581PWP
TPS65581PWP by Texas Instruments is a switching regulator with 20 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 7V and current of 2.5A, suitable for automotive applications due to its pulse width modulation control mode and buck switcher configuration at a frequency of up to 700 kHz.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76 TO 7V
700 kHz
TOP414GN-TL
Power Integrations
TOP414GN-TL by Power Integrations is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output current of 4.25A and operates at a frequency of up to 132kHz. Ideal for automotive applications due to its compact size and buck-boost configuration.
72 V
36 V
4.25 A
3.73 mm
132 kHz
6.35 mm
LMR22007YYZFR
LMR22007YYZFR by Texas Instruments is a switching regulator with a max output current of 0.75A and a max switching frequency of 2090kHz. Ideal for automotive applications, it operates in temperatures ranging from -40 to 125°C, making it suitable for various power management needs. With a compact square package style and surface mount design, this regulator offers precise control using pulse width modulation technique.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 5.5V
S-XBGA-B9
1.622 mm
9
.75 A
BGA9,3X3,20
.625 mm
2090 kHz
LMR22007YYZFT
LMR22007YYZFT by Texas Instruments is a 9-terminal switching regulator with a max output current of 0.75A and max input voltage of 20V. Operating in automotive grade, it uses pulse width modulation for control and has a max switching frequency of 2090kHz. Ideal for applications requiring precise current-mode control in compact spaces.
NCP1070P065G
NCP1070P065G by Onsemi is a switching controller with current-mode control, operating at -40 to 125 °C. It has a max switching frequency of 65 kHz and nominal input voltage of 8V. This rectangular package with 7 terminals is ideal for automotive applications requiring efficient power regulation.
65 kHz
NCP1070STCT3G
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
R-PDSO-G4
SOT-223
130 kHz
2.3 mm
3.5 mm
NCP1071P065G
NCP1071P065G by Onsemi is a switching controller with current-mode control. It operates b/w -40 to 125°C, ideal for automotive applications. With a max switching frequency of 65 kHz and nominal input voltage of 8V, it comes in an in-line package style with 7 terminals.
NCP1071P130G
NCP1071P130G by Onsemi is a CURRENT-MODE switching controller with 7 terminals, operating b/w -40 to 125 °C. It has a max switching frequency of 130 kHz and nominal input voltage of 8 V. Ideal for automotive applications due to its compact size (9.59mm x 7.62mm) and through-hole terminal form.
NCP1071STCT3G
NCP1071STCT3G by Onsemi is a small outline switching controller with current-mode control, operating b/w -40 to 125 °C. It has a max switching frequency of 130 kHz and nominal input voltage of 8V, suitable for automotive applications due to its matte tin finish and gull wing terminal form.
NCV887200D1R2G
NCV887200D1R2G by Onsemi is a switching controller with current-mode control technique. It operates b/w -40 to 125 °C, suitable for automotive applications. With a boost switcher configuration and max switching frequency of 742 kHz, it accepts input voltages from 4.8V to 40V.
4.8 V
13.2 V
BOOST
742 kHz
TPS54122RHLT
TPS54122RHLT by Texas Instruments is a switching regulator with 3A output current, 1.8V nominal output voltage, and 2000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 150 °C operating temperature range and compact chip carrier package style.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 3.6V, ALSO OPERATES AS LDO REGULATOR
R-PQCC-N24
5.5 mm
LCC24/28,.14X.2,20
TPS54561DPRT
TPS54561DPRT by Texas Instruments is a switching regulator with a max output current of 5A and a max output voltage of 59V. It operates in a buck configuration with pulse width modulation control technique, suitable for automotive applications due to its temperature grade and small outline package style.
S-PDSO-N10
10
59 V
HVSON
SOLCC10,.16,32
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
905-6525100
Texas Instruments 905-6525100 is a switching regulator with 3A output current, 17V max output voltage, and 2200kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and pulse frequency modulation control mode.
PULSE FREQUENCY MODULATION
S-PQCC-N40
17 V
2200 kHz
ADP5033ACBZ-6-R7
DUAL SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: VFBGA; Package Shape: SQUARE; Surface Mount: YES;
OUTPUT VOLTAGE RANGE FROM 0.8 TO 5.2 VOLT AND 0.8V TO 3.8V FOR LDO
DMOS
NCP81143MNTXG
NCP81143MNTXG by Onsemi is a 36-terminal switching controller with current-mode control, operating b/w -40 to 125 °C. It features a max switching frequency of 1000 kHz and is designed for automotive applications due to its matte tin finish and chip carrier package style.
QCCN
LCC36,.2SQ,16
.4 mm
NCP1615ADR2G
NCP1615ADR2G by Onsemi is a voltage-mode boost switching regulator with 15V nominal input/output voltage, 50kHz max switching frequency, and 3.5mA supply current. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package design.
9.5 V
R-PDSO-G13
8.65 mm
13
SOP13/14,.25
15
3.5 mA
50 kHz
NCP1615C2DR2G
NCP1615C2DR2G by Onsemi is a voltage-mode switching regulator with a 15V nominal voltage and 50 kHz max switching frequency. Ideal for automotive applications, this boost switcher has a compact small outline package and operates b/w -40 to 125 °C temperature range.
R-PDSO-G15
SOP15/16,.25
NCP1615D2DR2G
NCP1615D2DR2G by Onsemi is a voltage-mode switching regulator with a max operating temperature of 125°C. It has a boost switcher configuration and can handle input voltages ranging from 9.5V to 28V. This IC is commonly used in automotive applications for power factor control.
NCP1615DDR2G
NCP1615DDR2G by Onsemi is a VOLTAGE-MODE switcher with 15V supply, operating from -40 to 125 °C. It has a max switching frequency of 50 kHz and is ideal for automotive applications due to its small outline package and boost configuration.
TPS65273VRHHT
TPS65273VRHHT by Texas Instruments is a dual switching controller with a max output current of 3.5A and a control technique of pulse width modulation. It operates in automotive-grade temperatures, has a min input voltage of 4.5V, and is suitable for applications requiring high efficiency power conversion.
ADJUSTABLE OUTPUT MODE FROM 0.68 V TO 1.95 V
3.5 A
LCC36,.25SQ,20
IFX90121ELV50XUMA1
Infineon Technologies
IFX90121ELV50XUMA1 by Infineon is a switching regulator with 14 terminals, operating temp. range of -40 to 125°C, and max. input voltage of 45V. Ideal for automotive applications due to its small size (4.9mm x 3.9mm) and pulse width modulation control technique at a high switching frequency of 2200 kHz.
PFM CONTRO TECHNIQUE ALSO POSSIBLE
4.75 V
R-PDSO-G14
14
HLSSOP
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH
© 2023 All rights reserved
