Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP19111T-E/MQ by Microchip is a current-mode switching controller with PWM control technique. It operates in automotive grade temperature range (-40 to 125°C) and supports buck switcher configuration. With a wide input voltage range (4.5-32V), it's ideal for various applications requiring high switching frequency up to 1600 kHz.
Median Price
$5.130
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
NAC Semi
1+ parts
$4.970
100+ parts
-
1k+ parts
10k+ parts
$4.220
Nova Conductors
$5.290
Vyrian
Chip Stock
Ampacity Inc.
$5.500
AZTECH Wire
$17.990
Kepictronics
Lixinc
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
West Coast Incorporated
Provides good thermal and electrical insulation, making the product reliable and durable.
Easy to mount on PCBs, saving space and simplifying assembly process.
Ensures high quality and reliability as per automotive industry standards.
Allows for a wide range of output voltage options, catering to various applications.
Offers efficient and precise control over the output current, enhancing performance.
Switching Regulators & Controllers MCP19111T-E/MQ attributes and parameters. Explore more Switching Regulators & Controllers devices from Microchip Technology
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Voltage:
Minimum Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
MCP19111T-E/MQ Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - MCP19111 Datasheet 07/Aug/2013 Mold Compound Update 31/Oct/2014
PCN Assembly/Origin - Mult Devices 24/May/2018
PCN Packaging - Label and Packing Changes 23/Sep/2015 Packing Changes 10/Oct/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Jinan Jingheng Electronics
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
PLM76005RNPRQ1
PLM76005RNPRQ1 by Texas Instruments is a 30-terminal switching regulator with a 24V nominal input voltage. It operates in automotive-grade temperatures (-40 to 125°C) and supports a max output current of 5A at up to 500kHz switching frequency. Ideal for applications requiring high efficiency buck converter control in compact spaces.
LM2594M-3.3/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS82150SILT
TPS82150SILT by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a wide input range of 3-17V, output from 0.9-6V at 1A max current. Ideal for automotive applications due to its compact size and hybrid technology with PWM control.
LM5117PMHX/NOPB
Switching Regulator or Controllers; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Qualification: Not Qualified;
UCC28070PWR
UCC28070PWR by Texas Instruments is a current-mode power factor controller with a boost switcher configuration. It operates at a max switching frequency of 300 kHz and has a max output current of 0.75 A. Ideal for automotive applications due to its wide temperature range and small outline package style.
TPS54260DGQR
TPS54260DGQR by Texas Instruments is a switching regulator with a max output current of 2.5A and a max output voltage of 58V, suitable for automotive applications. It operates in pulse width modulation control mode, with a min operating temperature of -40°C and a max operating temperature of 125°C. The package style is small outline, heat sink/slug, thin profile, shrink pitch, making it ideal for space-constrained designs.
LM2674M-12/NOPB
LM2674M-12/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a nominal output voltage of 12V. It operates in a temperature range from -40°C to 125°C, making it suitable for automotive applications. This small outline package has dual terminals and uses DMOS technology for efficient performance.
PLM5164QDDATQ1
PLM5164QDDATQ1 by Texas Instruments is a switching regulator with 8 terminals, operating at -40 to 150°C. It supports input voltage range of 6-100V and output voltage from 1.2-90V, delivering up to 1A current at a frequency of 1000kHz. Ideal for automotive applications due to its compact size and pulse width modulation control technique.
TPS54061DRBR
TPS54061DRBR by Texas Instruments is a switching regulator with a max output voltage of 58V and a max output current of 0.2A. It operates in buck configuration, has a control mode of current-mode, and uses pulse width modulation for control technique. This IC is suitable for automotive applications due to its temperature grade and can handle input voltages ranging from 4.7V to 60V.
LMZ22005TZE/NOPB
LMZ22005TZE/NOPB by Texas Instruments is a switching regulator with 5A output current, 950 kHz max switching frequency, and 3.3V nominal output voltage. It is ideal for industrial applications requiring efficient power management in a compact package.
MC34063ADR2G
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54160DGQ
TPS54160DGQ by Texas Instruments is a switching regulator with a max output current of 1.5A and max output voltage of 58V, suitable for automotive applications. It operates b/w -40 to 150°C, with a control mode of current-mode PWM and a max switching frequency of 2500kHz. The package style is small outline, heat sink/slub, thin profile, shrink pitch.
LMZ23603TZ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Peak Reflow Temperature (C): 245; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE;
LT8609SIV#PBF
Analog Devices
LT8609SIV#PBF by Analog Devices is a 16-terminal switching regulator with a max output current of 5.7A and PWM control technique. Ideal for automotive applications, it operates b/w -40 to 125°C, supports input voltages from 2.7V to 42V, and has a compact square package style for surface mounting at just 3x3mm in size.
LMZ31704RVQT
LMZ31704RVQT by Texas Instruments is a current-mode switching regulator with 4A output current, 1.8V nominal output voltage, and 1200kHz max switching frequency. Ideal for industrial applications requiring efficient power management in a compact chip carrier package style.
EN5322QI
Intel
EN5322QI by Intel is a voltage-mode switching regulator with 24 terminals, operating b/w -40 to 85°C. It offers a max output current of 2A at a frequency of 4000 kHz, suitable for industrial applications requiring efficient power management in compact spaces.
LMZ10500SILT
LMZ10500SILT by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output current up to 0.65A. Ideal for automotive applications, it features a buck switcher configuration and pulse width modulation control mode for efficient power management in compact designs.
LMR50410XDBVR
LMR50410XDBVR by Texas Instruments is a small outline switching regulator with 6 terminals, operating at -40 to 150°C. It supports input voltage from 4-36V and output voltage from 1-28V, delivering up to 1A current. Ideal for automotive applications due to its pulse frequency modulation control technique and compact design.
TPS23753APWR
TPS23753APWR by Texas Instruments is a switching controller with a 48V nominal input voltage and 273 kHz max switching frequency. It operates in automotive-grade temperatures from -40 to 125 °C, making it suitable for various power management applications. With a small outline and thin profile package style, it offers efficient current-mode control using pulse width modulation technique.
TPS62172DSGR
TPS62172DSGR by Texas Instruments is a switching regulator with a 12V nominal input voltage and 3.3V output voltage, ideal for industrial applications. It operates in hysteric current mode with a max output current of 0.5A and a max switching frequency of 2250 kHz, ensuring efficient power conversion in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP16301T-I/CHY
Microchip Technology
MCP16301T-I/CHY by Microchip: Switching Regulator, 85°C max temp, 2-15V output range. Ideal for industrial applications requiring current-mode control with a 550 kHz switching frequency and 0.6A output current. Small outline package with low profile and shrink pitch design for space-constrained setups.
MCP16331T-E/CH
MCP16331T-E/CH by Microchip is a current-mode switching regulator with 0.8A output, PWM control technique, and 550kHz max frequency. Ideal for automotive applications, it operates b/w -40 to 125°C with input range of 4.4-50V and output voltage of 2-24V.
MCP16331T-E/CHVAO
MCP16331T-E/CHVAO by Microchip is a switching regulator with 6 terminals, operating temp. range of -40 to 125°C, and max output current of 0.8A. Ideal for automotive applications due to AEC-Q100 screening level and compact design with small outline package style. Supports buck switcher config., PWM control technique, and has a max switching frequency of 550kHz.
MCP16311-E/MS
MCP16311-E/MS by Microchip is a current-mode BUCK switching regulator with 2-24V output range, 575kHz max frequency, and AEC-Q100 screening. Ideal for automotive applications due to -40 to 125°C temp range, it's a small outline package with 8 terminals and pulse width modulation control.
MCP16301T-E/CH
MCP16301T-E/CH by Microchip: 0.6A output, 2-15V range, 550kHz frequency. Ideal for automotive applications due to -40 to 125°C temp range and compact design with small outline and low profile package style.
MCP16301HT-E/CH
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MCP16301T-E/CHVAO
MCP16301T-E/CHVAO by Microchip is a switching regulator with 0.6A output current, 3.3V nominal output voltage, and 550kHz max switching frequency. Ideal for automotive applications due to AEC-Q100 screening level and -40°C to 125°C operating temperature range.
MCP16311T-E/MS
MCP16311T-E/MS by Microchip is a current-mode switching regulator with buck configuration. It operates b/w -40 to 125°C, suitable for automotive applications. With a wide input range of 4.4-30V and output voltage of 2-24V, it offers high efficiency at a max frequency of 575kHz.
MCP16311T-E/MNY
MCP16311T-E/MNY by Microchip is a current-mode switching regulator with 8 terminals, operating from -40 to 125°C. It has a buck switcher configuration, PWM control technique, and can handle input voltages from 4.4V to 30V. Ideal for automotive applications due to AEC-Q100 screening and TS16949 compliance.
MCP16311-E/MSVAO
MCP16311-E/MSVAO by Microchip is a current-mode switching regulator with 2-24V output voltage range, ideal for automotive applications. Operating temperature ranges from -40 to 125°C, with a max switching frequency of 575 kHz. Package style is small outline, thin profile, and shrink pitch, suitable for space-constrained designs.
MCP16301HT-E/CHVAO
MCP16301HT-E/CHVAO by Microchip is a current-mode switching regulator with 0.6A output, PWM control, and 550kHz max frequency. Ideal for automotive applications with input voltage range of 4.7V to 36V and output voltage of 3.3V, it operates in temp range -40°C to +125°C meeting AEC-Q100 standards.
MCP16312-E/MS
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
MCP16311T-E/MSVAO
MCP16311T-E/MSVAO by Microchip is a current-mode BUCK switching regulator with 2-24V output voltage range, ideal for automotive applications. Operating temperature -40 to 125°C, it has a max switching frequency of 575 kHz. AEC-Q100 and TS 16949 screening level ensures high quality in this compact (3x2mm) package.
MCP1640T-I/CHY
MCP1640T-I/CHY by Microchip is a small outline, low profile switching regulator with boost configuration. It operates b/w -40 to 85°C and has a max output voltage of 5.5V. Ideal for industrial applications requiring a compact design and efficient power management up to 575 kHz frequency.
MCP16312T-E/MS
MCP16312T-E/MS by Microchip is a current-mode BUCK switching regulator with 2-24V output voltage range, ideal for automotive applications. It operates at -40 to 125°C, with a max switching frequency of 575 kHz. This small outline package has 8 terminals and is AEC-Q100 compliant.
MCP16311T-E/MNYVAO
MCP16311T-E/MNYVAO by Microchip is a current-mode switching regulator with 2-24V output voltage range, ideal for automotive applications. Operating at -40 to 125°C, it offers a max switching frequency of 575kHz and AEC-Q100 screening level. With a compact design (3x3mm), it features pulse width modulation control and buck switcher configuration.
MCP16251T-I/CH
MCP16251T-I/CH by Microchip is a boost switcher with max output current of 0.1A and max switching frequency of 575kHz. It operates in industrial temp range, ideal for battery charge control applications. Package style is small outline, low profile, shrink pitch with dual terminals.
MCP1640BT-I/CHY
MCP1640BT-I/CHY by Microchip: Boost switching regulator with 1.2V nominal input, 3.3V output, and 575kHz max frequency. Ideal for industrial applications requiring compact design and efficient power management in a small outline package. Operating temp range -40 to 85°C makes it suitable for various environments.
MCP1661T-E/OT
MCP1661T-E/OT by Microchip is a current-mode switching regulator with boost configuration. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output voltage of 32V and switching frequency of 575 kHz, it's ideal for compact designs requiring efficient power management.
MCP16301T-E/CHY
MCP16301T-E/CHY by Microchip: Switching Regulator, 2-15V output, 0.6A current, PWM control mode. Ideal for automotive applications due to -40 to 125°C temp range and compact design (2.9x1.6mm). Offers efficient power conversion with a max switching frequency of 550kHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved