Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
L6738ATR
STMicroelectronics
L6738ATR by STMicroelectronics is a voltage-mode switching controller with a buck switcher configuration. It operates b/w -40 °C to 125°C, making it suitable for automotive applications. With a max switching frequency of 200 kHz, this chip carrier package with very thin profile and nickel/palladium/gold terminal finish is ideal for compact designs.
SWITCHING CONTROLLER
VOLTAGE-MODE
PULSE WIDTH MODULATION
12 V
5 V
S-XQCC-N16
e4
3 mm
1
16
125 Cel
-40 Cel
UNSPECIFIED
HVQCCN
LCC16,.12SQ,20
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Not Qualified
1 mm
Switching Regulator or Controllers
YES
BUCK
200 kHz
AUTOMOTIVE
Nickel/Palladium/Gold (Ni/Pd/Au)
NO LEAD
.5 mm
QUAD
L6738A
L6738A by STMicroelectronics is a voltage-mode switching controller with a buck switcher configuration. Operating temperature ranges from -40 to 125 °C, suitable for automotive applications. It has a max switching frequency of 200 kHz and supports input voltages b/w 5-12V.
L7986
STMicroelectronics L7986 is a switching regulator with 4.7A output current, 275kHz max switching frequency, and voltage-mode control. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package design.
ADJUSTABLE OUTPUT VOLTAGE FROM 0.6 VOLT TO 38 VOLT
SWITCHING REGULATOR
38 V
4.5 V
S-PDSO-N10
10
4.7 A
PLASTIC/EPOXY
HVSON
SOLCC10,.11,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
NOT SPECIFIED
275 kHz
DUAL
NB638DL-LF-Z
Monolithic Power Systems
Monolithic Power Systems' NB638DL-LF-Z is a 20-terminal switching regulator with current-mode control, operating b/w -40 to 125°C. With a buck switcher configuration and PWM control technique, it supports input voltages from 4.5V to 28V, making it ideal for automotive applications requiring precise regulation at up to 1000kHz frequency.
CURRENT-MODE
28 V
R-XQCC-N20
e3
4 mm
20
1.2 V
RECTANGULAR
260
1000 kHz
MATTE TIN
40
TCV7103AF(TE12L,Q)
Toshiba
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HSOF; Package Shape: SQUARE; Surface Mount: YES;
ADJUSTABLE OUTPUT VOLTAGE FROM 0.8V
5.6 V
2.7 V
3.3 V
S-PDSO-F8
5 mm
8
HSOF
FL8,.2
SMALL OUTLINE, HEAT SINK/SLUG
1200 kHz
CMOS
FLAT
1.27 mm
TCV7113F(TE12L,Q)
TPS54040ADRCT
Texas Instruments
TPS54040ADRCT by Texas Instruments is a switching regulator with a max output voltage of 39V and max output current of 0.5A. It operates in buck configuration, supports pulse width modulation control technique, and has a small outline package suitable for automotive applications.
42 V
3.5 V
.5 A
39 V
.8 V
SOLCC10,.12,20
2500 kHz
NICKEL PALLADIUM GOLD
30
TPS54120RGYT
TPS54120RGYT by Texas Instruments is a switching regulator with 1A output current, 500kHz max switching frequency, and 3.3V nominal output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact chip carrier package style.
17 V
R-PQCC-N24
5.5 mm
2
24
1 A
6 V
500 kHz
3.5 mm
NCP1612BDR2G
Onsemi
POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
POWER FACTOR CONTROLLER
35 V
9.5 V
15 V
R-PDSO-G10
4.9 mm
SSOP
SOP10,.25,40
SMALL OUTLINE, SHRINK PITCH
15
2 mm
3 mA
BOOST
TIN
GULL WING
3.9 mm
NCV887101D1R2G
NCV887101D1R2G by Onsemi is a small outline switching controller with current-mode control technique. It operates in automotive temperature grade range (-40 to 125 °C) and supports boost switcher configuration. With a max input voltage of 40V, it has a high switching frequency of 1100 kHz making it suitable for various power management applications.
40 V
3.2 V
13.2 V
R-PDSO-G8
SOP
SOP8,.25
SMALL OUTLINE
1.75 mm
1100 kHz
L6564TD
L6564TD by STMicroelectronics is a switching controller with 10 terminals, operating b/w -40 to 125 °C. It features a current-mode control technique, pulse width modulation, and supports input voltages from 10.5V to 22.5V. Ideal for automotive applications due to its small outline package style and low supply current of 6mA.
22.5 V
10.5 V
12
6 mA
TCV7102F(TE12L,Q)
5.5 V
3.6 A
2 V
SOLCC8,.25
1700 kHz
L6738
STMicroelectronics L6738 is a 16-terminal switching controller with VOLTAGE-MODE control mode, suitable for automotive applications. It operates b/w -40 to 125 °C and has a max switching frequency of 200 kHz. The IC features PULSE WIDTH MODULATION and BUCK switcher config in a SQUARE package style.
3
ADP1053ACPZ-R7
Analog Devices
ADP1053ACPZ-R7 by Analog Devices is a 40-terminal switching controller with a 3.3V nominal voltage, suitable for automotive applications. It operates b/w -40 to 125 °C and features a matte tin terminal finish in a square chip carrier package style. This CMOS technology device is surface-mountable and has a moisture sensitivity level of 3.
S-PQCC-N40
QCCN
LCC40,.24SQ,20
CHIP CARRIER
3.3
Power Management Circuits
ADP2381AREZ
ADP2381AREZ by Analog Devices is a 16-terminal switching regulator with a max output current of 11.5A and max switching frequency of 1400kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, using pulse width modulation control technique for efficient power management.
OUTPUT VOLTAGE RANGE FROM 0.6 V TO 18 V
20 V
R-PDSO-G16
11.5 A
HTSSOP
TSSOP16,.25
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
1.1 mm
1400 kHz
DMOS
.65 mm
4.4 mm
UCC28070APW
UCC28070APW by Texas Instruments is a current-mode power factor controller with a boost switcher configuration. It operates at a max switching frequency of 300 kHz and has a nominal voltage of 12 V, making it suitable for automotive applications requiring efficient power regulation in compact spaces.
21 V
10.8 V
R-PDSO-G20
6.5 mm
TSSOP
TSSOP20,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.2 mm
20 mA
300 kHz
TPS43340QPHPRQ1
TPS43340QPHPRQ1 by Texas Instruments is a switching controller with 48 terminals, operating temperature range of -40 to 125°C, and output current up to 2A. Ideal for automotive applications due to its compact size (7x7mm) and pulse width modulation control technique.
4 V
13 V
S-PQFP-G48
7 mm
4
48
2 A
11 V
.9 V
HTFQFP
TQFP48,.35SQ
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
SINGLE
600 kHz
L9758
L9758 by STMicroelectronics is a switching controller with 36 terminals, operating voltage of 5.5-26.5V, and max frequency of 450kHz. Ideal for automotive applications due to its current-mode control, buck-boost configuration, and compact size (15.9mm x 11mm x 3.6mm).
R-PDSO-G36
15.9 mm
36
SSOP36,.56
5.5/26.5
3.6 mm
BUCK-BOOST
450 kHz
11 mm
ST1S31D-R
ST1S31D-R by STMicroelectronics is a switching regulator with current-mode control, operating b/w -40 to 125 °C. It features a buck switcher configuration, PWM control technique, and supports input voltages from 2.8V to 5.5V. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and high max switching frequency of 1900kHz.
OUTPUT VOLTAGE IN ADJUSTABLE MODE FROM 0.8
2.8 V
1900 kHz
TPS65300QRHFRQ1
TPS65300QRHFRQ1 by Texas Instruments is a switching regulator with 24 terminals, operating temperature range of -40 to 125°C, and output current up to 1.2A. Ideal for automotive applications due to its voltage-mode control technique and buck switcher configuration.
14 V
S-PQCC-N24
1.2 A
5.542 V
LCC24,.16X.2,20
3000 kHz
A8601KLPTR-T
Allegro MicroSystems
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
R-PDSO-G28
28
TSSOP28,.25
3.3,10
.635 mm
TPS51275CRUKT
TPS51275CRUKT by Texas Instruments is a dual switching controller with a max output current of 20A and a max operating temperature of 125°C. It operates as a buck switcher with a nominal input voltage of 12V, making it suitable for automotive applications requiring efficient power regulation in compact spaces.
ADJUSTABLE OUTPUT MODE FROM 4.5 TO 5.5V AND 2.97 TO 3.63V
DUAL SWITCHING CONTROLLER
24 V
S-PQCC-N20
20 A
.8 mm
355 kHz
.4 mm
ADP5034ACPZ-2-R7
ADP5034ACPZ-2-R7 by Analog Devices is a switching regulator with 24 terminals, operating at -40 to 125°C. It offers a max output current of 2.3A and supports input voltages from 2.3V to 5.5V, making it ideal for automotive applications requiring efficient power supplies up to 5V.
ALSO OPERATES AS LDO REGULATOR; OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5.2V
2.3 V
3.6 V
S-XQCC-N24
2.3 A
LCC24,.16SQ,20
1.8/5,2.5/5
3500 kHz
ADP5034AREZ-R7
ADP5034AREZ-R7 by Analog Devices is a switching regulator with 28 terminals, operating at -40 to 125°C. It has a max output current of 2.3A and supports input voltages from 2.3V to 5.5V, making it ideal for automotive applications requiring high efficiency power supplies up to 3500kHz switching frequency.
9.7 mm
ADP5034AREZ
ADP5034AREZ by Analog Devices is a switching regulator with 28 terminals, operating at -40 to 125°C. It offers a max output current of 2.3A and supports input voltages from 2.3V to 5.5V, making it ideal for automotive applications requiring efficient power management up to 3500kHz switching frequency.
ADP2303ARDZ
ADP2303ARDZ by Analog Devices is a switching regulator with 6.4A output current, 805kHz max switching frequency, and 1.75mm max seated height. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact rectangular package design. This current-mode control PWM buck switcher operates at a nominal input voltage of 3.3V with a 0.8V output voltage range.
PFM CONTROL ALSO POSSIBLE; ADJUSTABLE OUTPUT VOLTAGE DOWN TO 0.8V
3 V
6.4 A
HSOP
805 kHz
ADP5037ACPZ-2-R7
ADP5037ACPZ-2-R7 by Analog Devices is a switching regulator with 24 terminals, operating at -40 to 125 °C. It has a max output current of 1.9A and supports input voltages from 2.3V to 5.5V, making it ideal for automotive applications requiring efficient power supplies up to 5V.
PFM CONTROL ALSO POSSIBLE
1.9 A
.245 mA
PM6644
STMicroelectronics PM6644 is a switching regulator with 10 terminals, operating temp. range -40 to 125 °C, and max. freq. of 600 kHz. Ideal for automotive applications due to its compact size (3x3mm), current-mode control, and pulse width modulation technique for efficient power management in vehicles.
ADJUSTABLE OUTPUT RANGE FROM 0.9 VOLT TO 8 VOLT
25 V
3.47 V
TPS54340DDAR
TPS54340DDAR by Texas Instruments is a switching regulator with 3.5A output current, 41V max output voltage, and 2500kHz max switching frequency. Ideal for automotive applications due to its low profile design and wide temperature range (-40 to 125°C).
3.5 A
41 V
HLSOP
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
1.7 mm
NICKEL PALLADIUM GOLD SILVER
PI3301-00-LGIZ
Vicor
Vicor's PI3301-00-LGIZ is a switching regulator with 10A output current, 3.3V nominal output voltage, and 650kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact rectangular grid array package.
ALSO OPERATES IN ADJUSTABLE MODE FROM 2.3V TO 4.1V
36 V
8 V
R-XBGA-B123
14 mm
123
10 A
4.1 V
LGA
LGA123,10X14,40
GRID ARRAY
2.62 mm
650 kHz
BUTT
BOTTOM
10 mm
PI3301-01-LGIZ
Vicor's PI3301-01-LGIZ is a 15A BUCK switching regulator with 2.3-4.1V output range, ideal for automotive applications. Operating at -40 to 125°C, it accepts input from 8-36V and has a max switching frequency of 650kHz. With a compact rectangular grid array package, it offers high efficiency power conversion in a surface-mount design.
OUTPUT IN ADJUSTABLE MODE IS 2.3 TO 4.1V
15 A
PI3301-20-LGIZ
PI3301-20-LGIZ by Vicor is a surface mount switching regulator with a max output current of 10A and a nominal input voltage of 24V. It is commonly used in automotive applications due to its temperature grade and compact size.
R-XBGA-N123
PI3302-00-LGIZ
Vicor's PI3302-00-LGIZ is a switching regulator with 123 terminals, operating at -40 to 125°C. It offers a 3.3-6.5 V output voltage range and handles up to 10 A current at 1000 kHz frequency. Ideal for automotive applications due to its compact size (14x10 mm) and efficient buck configuration.
ALSO OPERATES IN ADJUSTABLE MODE FROM 3.3V TO 6.5V
6.5 V
245
PI3303-00-LGIZ
Vicor's PI3303-00-LGIZ is a RECTANGULAR GRID ARRAY switching regulator with 123 terminals. It operates b/w -40 to 125 °C, outputs 6.5-13 V at 8 A, and switches at up to 1400 kHz. Ideal for automotive applications due to its BUCK configuration and input range of 17.4-36 V.
ALSO OPERATES IN ADJUSTABLE MODE FROM 6.5V TO 13V
17.4 V
8 A
PI3305-00-LGIZ
Vicor's PI3305-00-LGIZ is a switching regulator with 8A output current, 1500 kHz switching frequency, and 15V nominal output voltage. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact rectangular grid array package style.
ALSO OPERATES IN ADJUSTABLE MODE FROM 10V TO 16V
20.4 V
16 V
10 V
1500 kHz
PRM48BF480T500A00
Vicor's PRM48BF480T500A00 is a 500W switching regulator with 97.8% efficiency, operating at -40 to 125°C. Ideal for automotive applications, it offers a wide input voltage range of 38-55V and output voltage of 20-55V, making it suitable for various power supply needs.
CE, TUV
97.8 %
6.73 mm
55 V
48 V
R-XQMA-J32
32.5 mm
.2 %
32
10.42 A
QMA
MICROELECTRONIC ASSEMBLY
6.98 mm
Power Supply Modules
1070 kHz
HYBRID
J BEND
500 W
.017 Seconds
22 mm
PRM48BH480T250A00
Vicor PRM48BH480T250A00 is a 250W switching regulator with 96.7% efficiency, VOLTAGE-MODE control mode, and 5.21A output current. Ideal for automotive applications due to its AUTOMOTIVE temperature grade and OVER CURRENT protection feature.
TUV, CE
96.7 %
R-XQMA-J20
5.21 A
OVER CURRENT
250 W
16.5 mm
LM25576Q0MHX/NOPB
LM25576Q0MHX/NOPB by Texas Instruments is a switching regulator with 5.1A output current, 545kHz max switching frequency, and -40 to 125°C operating temp range. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range of 6-42V.
ALSO HAS ADJUSTABLE OUTPUT VOLTAGE AS LOW AS 1.225V, SEATED HGT-NOM
5.1 A
545 kHz
LM3102QMH/NOPB
LM3102QMH/NOPB by Texas Instruments is a switching regulator with 20 terminals, VOLTAGE-MODE control mode, and 3.3V nominal output voltage. It operates b/w -40 to 125 °C and supports a max output current of 2.5A. Ideal for automotive applications due to its compact size and high efficiency at up to 1000 kHz switching frequency.
SEATED HGT-NOM, ADJUSTABLE OUTPUT VOLTAGE IS DOWN TO 0.8V
18 V
2.5 A
7 V
MOS
NCV7471DQ5R2G
NCV7471DQ5R2G by Onsemi is a switching regulator with 36 terminals, operating voltage of 6-28V, and max output current of 0.5A. Ideal for automotive applications, it features a buck-boost switcher config and temp range from -40 to 150 °C.
2.5 V
10.3 mm
150 Cel
HSSOP
SSOP36,.4,20
SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
6/28
2.65 mm
Automotive Circuits
520 kHz
7.5 mm
TPS65281RGVT
TPS65281RGVT by Texas Instruments is a switching regulator with 16 terminals, operating temperature range of -40 to 125°C, and output current up to 3A. Ideal for automotive applications, it features a control mode of current-mode PWM and a max switching frequency of 1400 kHz. With a compact square chip carrier package style, it offers efficient power management in tight spaces.
S-PQCC-N16
3 A
LCC16,.16SQ,25
ADP2118ACPZ-R2
ADP2118ACPZ-R2 by Analog Devices is a 16-terminal switching regulator with a max output current of 6.4A and a max switching frequency of 1200kHz. Ideal for automotive applications, it operates b/w -40°C to 125°C, with a control mode of current-mode PWM for efficient power management in compact spaces.
OUTPUT VOLTAGE RANGE FROM 0.6 V TO 5.5 V, ALSO OPERATES IN PFM CONTROL TECHNIQUE
LM20144QMHE/NOPB
LM20144QMHE/NOPB by Texas Instruments is a switching regulator with 16 terminals, operating b/w -40 to 125°C. It offers a max output current of 4A and a max switching frequency of 1500 kHz. Ideal for automotive applications due to its compact size, PWM control mode, and buck switcher configuration.
ALSO OPERATES IN ADJUSTABLE MODE DOWN TO 0.8V; SEATED HGT-NOM
2.95 V
4 A
LM20144QMHX/NOPB
LM20144QMHX/NOPB by Texas Instruments is a 16-terminal switching regulator with a max output current of 4A and max operating temp of 125°C. Ideal for automotive applications, it operates in buck configuration with pulse width modulation control mode, offering a wide input voltage range from 2.95V to 5.5V.
TPS54360DDA
TPS54360DDA by Texas Instruments is a switching regulator with max output current of 3.5A and max input voltage of 60V, ideal for automotive applications. It operates in current-mode control with a PWM technique at a max switching frequency of 2500kHz, ensuring efficient power conversion. With a compact package style and low profile design, it offers high performance in a small form factor.
60 V
58.8 V
TPS56921PWPR
TPS56921PWPR by Texas Instruments is a 20-terminal switching regulator with a max output current of 22A and a control mode of current-mode PWM. With a wide operating temperature range from -40 to 125°C, it is ideal for automotive applications requiring high efficiency and precise voltage regulation.
22 A
1.48 V
.72 V
1600 kHz
UCC28710D
UCC28710D by Texas Instruments is a switching controller with 7 terminals, operating from -40 to 125 °C. It supports buck-boost configuration, with a max input voltage of 35 V and freq modulation control technique. Ideal for automotive applications due to its small outline package and high temp grade.
ALSO OPERATES IN AMPLITUTDE MODULATION CONTROL TECHNIIQUE
CURRENT/VOLTAGE-MODE
FREQUENCY MODULATION
9 V
R-PDSO-G7
7
SOP7/8,.25
100 kHz
UCC28713D
UCC28713D by Texas Instruments is a switching controller with a nominal input voltage of 25V, operating b/w -40 to 125°C. It features a buck-boost switcher configuration, frequency modulation control technique, and can handle input voltages ranging from 9V to 35V. This IC is suitable for automotive applications due to its small outline package style and high max operating temperature of 125°C.
© 2023 All rights reserved
