Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MC74LVX4053MG
Onsemi
MC74LVX4053MG by Onsemi is a CMOS multiplexer with 3 functions, 2 channels, and 10 ohm on-state resistance match. It operates at -55 to 125 °C with a supply voltage range of 2.5V to 6V. Ideal for military-grade applications requiring fast switching times and high isolation levels.
SINGLE-ENDED MULTIPLEXER
R-PDSO-G16
e4
10.2 mm
-6 V
-3 V
2
3
16
70 dB
10 ohm
26 ohm
125 Cel
-55 Cel
PLASTIC/EPOXY
SOP
SOP16,.3
RECTANGULAR
SMALL OUTLINE
260
-3.3/GND,3.3/5
Not Qualified
2.05 mm
.02 A
Multiplexer or Switches
6 V
2.5 V
3 V
YES
28 ns
BREAK-BEFORE-MAKE
CMOS
MILITARY
NICKEL PALLADIUM GOLD
GULL WING
1.27 mm
DUAL
5.275 mm
MC74LVX4053MELG
MC74LVX4053MELG by Onsemi is a 3-channel CMOS multiplexer with 26 ohm Ron, 28 ns switch-on/off time. Ideal for military-grade applications, it operates b/w -55 to 125 °C with a supply voltage range of -6V to +6V.
MC74LVXT4052MG
MC74LVXT4052MG by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max on-state resistance of 37 ohm. With a small outline package style, it's ideal for military-grade applications requiring fast switching times.
ALSO OPERATES WITH 2.5V TO 6V SINGLE SUPPLY
DIFFERENTIAL MULTIPLEXER
0 V
4
1
15 ohm
37 ohm
3.3
MC74LVXT4052MELG
MC74LVXT4052MELG by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max on-state resistance of 37 ohm. With a package style of small outline, it is suitable for military-grade applications requiring fast switching times.
MC74LVXT8051DG
MC74LVXT8051DG by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2-6V and offers fast switching times of 15ns on and 30ns off. With a compact small outline package, it is ideal for military-grade applications requiring low power consumption and high performance.
e3
9.9 mm
8
37 dB
25 ohm
50 ohm
SOP16,.25
2/6
1.75 mm
.16 mA
2 V
30 ns
15 ns
MATTE TIN
30
3.9 mm
SN74LV4052ADBRE4
Texas Instruments
SN74LV4052ADBRE4 by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at a supply voltage range of 2-5.5V. It offers a max on-state resistance of 225 ohm and nominal bandwidth of 50 kHz, suitable for industrial applications requiring high-speed signal switching in compact designs.
50 kHz
5.5 V
6.2 mm
45 dB
1.5 ohm
225 ohm
85 Cel
-40 Cel
SEPARATE OUTPUT
SSOP
SSOP16,.3
SMALL OUTLINE, SHRINK PITCH
2 mm
.05 A
.04 mA
35 ns
INDUSTRIAL
.65 mm
5.3 mm
CD4051BM96G4
CD4051BM96G4 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 20 V. With a nominal bandwidth of 20 kHz, it is ideal for military-grade applications requiring high-speed signal switching in compact spaces.
20 kHz
20.5 V
-.5 V
-5 V
NC
40 dB
1050 ohm
5/15
.01 A
3 mA
20 V
5 V
720 ns
Nickel/Palladium/Gold (Ni/Pd/Au)
NOT SPECIFIED
CD4051BMG4
CD4051BMG4 by Texas Instruments is a CMOS multiplexer with 16 terminals, operating at -55 to 125 °C. It has a max on-state resistance of 1050 ohm and peak reflow temp of 260 C. Ideal for military-grade applications requiring a small outline package with separate outputs and break-before-make switching.
+-5
CD4051BNSRE4
CD4051BNSRE4 by Texas Instruments is a CMOS multiplexer with 8 channels, 1050 ohm max resistance, and 720 ns switch-on/off time. Ideal for military-grade applications requiring a small outline package, it operates b/w -55 to 125 °C with separate outputs and break-before-make switching.
CD4052BM96E4
CD4052BM96E4 by Texas Instruments is a CMOS differential multiplexer with 4 channels, 1050 ohm Ron, and 25 kHz bandwidth. It operates at -55 to 125 °C, has a 1.75 mm height, and is MILITARY grade suitable for signal switching applications requiring high isolation and low on-state resistance.
25 kHz
CD74HC4316ME4
CD74HC4316ME4 by Texas Instruments is a CMOS SPST multiplexer with 4 channels, 480 ohm Ron, and 200 kHz bandwidth. It operates b/w -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring low on-state resistance and high off-state isolation in compact designs.
ALSO OPERATES AT 2V TO 10V (VCC-VEE) SUPPLY
SPST
200 kHz
-1 V
-4.5 V
NO
62 dB
5 ohm
480 ohm
2/6,GND/-6
.025 A
.08 mA
1 V
4.5 V
34 ns
CD74HC4316PWRE4
CD74HC4316PWRE4 by Texas Instruments is a CMOS SPST switch with 4 functions, operating at -55 to 125°C. It has a max on-state resistance of 170 ohm and a bandwidth of 200 kHz. Ideal for military-grade applications requiring low power consumption and high isolation levels.
ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
5 mm
170 ohm
TSSOP
TSSOP16,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.2 mm
4.4 mm
SN65LVCP22DG4
SN65LVCP22DG4 by Texas Instruments is a BICMOS technology-based cross point switch with 2 channels, operating at a supply voltage range of 3V to 3.6V. It features separate outputs, dual terminal position, and fast switching times of 4ns. Ideal for industrial applications requiring high-speed signal multiplexing in compact designs.
CONFIGURABLE AS 2:1 MUX, 1:2 DEMUX, REPEATER OR 1:2 SIGNAL SPLITTER
CROSS POINT SWITCH
.087 mA
3.6 V
3.3 V
4 ns
BICMOS
SN65LVCP23PWRG4
SN65LVCP23PWRG4 by Texas Instruments is a BICMOS technology-based cross point switch with 2 channels. It operates at a nominal voltage of 3.3V and has separate outputs. This small outline, thin profile IC is ideal for industrial applications requiring fast switching times of 2.5ns.
2.5 ns
SN74HC4851DRE4
SN74HC4851DRE4 by Texas Instruments is a CMOS multiplexer with 16 terminals, operating voltage of 2-6V, and on-state resistance of 700 ohm. It is used in automotive applications for signal switching with a max current of 0.05A and temperature range from -40 to 125°C.
2 ohm
700 ohm
90 ns
AUTOMOTIVE
SN74LV4051ADRE4
SN74LV4051ADRE4 by Texas Instruments is an 8-channel single-ended multiplexer with a max supply voltage of 5.5V and on-state resistance of 180 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a small outline package style, making it suitable for various switching applications in electronic circuits.
2.1 ohm
180 ohm
.02 mA
2.3 V
SN74LV4051APWG4
SN74LV4051APWG4 by Texas Instruments is a CMOS multiplexer with 16 terminals, operating at temperatures from -40 to 85°C. It has a max on-state resistance of 225 ohms and nominal bandwidth of 35 kHz. Ideal for industrial applications requiring low power consumption and high signal isolation.
35 kHz
SN74LV4052ADRE4
SN74LV4052ADRE4 by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at a supply voltage range of 2-5.5V and has a max on-state resistance of 180 ohm. This industrial-grade switch has a small outline package suitable for applications requiring fast switching times and low power consumption.
SN74LV4052APWG4
SN74LV4052APWG4 by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at a supply voltage range of 2-5.5V. It features low on-state resistance (225 ohm), fast switch-on/off times (35 ns), and high off-state isolation (45 dB). Ideal for industrial applications requiring precise signal routing in compact designs.
SN74LV4053APWRE4
SN74LV4053APWRE4 by Texas Instruments is a CMOS multiplexer with 3 functions, operating at 2.3-5.5V. It has a max on-state resistance of 180 ohm and offers separate outputs. Ideal for industrial applications requiring high-speed switching with low power consumption.
TL52055DRE4
TL52055DRE4 by Texas Instruments is a BICMOS technology multiplexer with 3 functions, 2 channels, and operates at industrial temperature grade. It has a supply voltage range of 4.5V to 9V, making it suitable for audio/video switch applications in various industries. This small outline package features surface mount design with nickel palladium gold terminal finish.
AUDIO/VIDEO SWITCH
SOP8,.25
5/9
9 V
TL52055PWRE4
TL52055PWRE4 by Texas Instruments is a 3-function multiplexer with a supply voltage range of 4.5V to 9V, suitable for industrial applications. This BICMOS technology IC has dual terminals, operates b/w -40°C to 85°C, and features a small outline package style. Ideal for audio/video switching with 2 channels and surface-mount compatibility.
TS3A5018DE4
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SPDT
300 kHz
48 dB
.4 ohm
22 ohm
2.5/3.3
.1 A
.002 mA
9 ns
10.5 ns
TS3A5018DRE4
TS3A5018DRE4 by Texas Instruments is a 4-function SPDT switch with 16 terminals, operating at -40 to 85°C. It has a max on-state resistance of 20 ohm, switching time of 10.5 ns, and bandwidth of 300 kHz. Ideal for industrial applications requiring low power consumption and high isolation levels.
20 ohm
TS3A5018PWRE4
TS3A5018PWRE4 by Texas Instruments is a 4-channel SPDT multiplexer switch with a nominal voltage of 2.5V and max operating temperature of 85°C. It is used in industrial applications requiring a small outline, thin profile package with a shrink pitch.
TS3L100DE4
TS3L100DE4 by Texas Instruments is a 4-function SPDT switch with 15 ohm Ron, 7.5 ns switch-on time, and 0.128 A signal current. Ideal for applications requiring fast switching and low on-state resistance in commercial temperature grades.
42 dB
1 ohm
70 Cel
0 Cel
.128 A
.003 mA
3.5 ns
7.5 ns
COMMERCIAL
TS3V340DRE4
TS3V340DRE4 by Texas Instruments is a 4-function SPDT multiplexer with 16 terminals, operating at 3.3V. With a bandwidth of 500 kHz and off-state isolation of 60 dB, it is ideal for industrial applications requiring fast switching times and low on-state resistance. The small outline package makes it suitable for compact designs in temperature-sensitive environments.
500 kHz
60 dB
6 ohm
1.5 mA
7 ns
ADG409BRUZ
Analog Devices
ADG409BRUZ by Analog Devices is a CMOS differential multiplexer with 4 channels. It has a max on-state resistance of 100 ohm and nominal off-state isolation of 75 dB. This industrial-grade switch operates at temperatures ranging from -40 to 85 °C, making it suitable for various applications in electronics.
CAN ALSO OPERATE WITH 12V SUPPLY
-15 V
75 dB
100 ohm
12/+-15
.5 mA
15 V
150 ns
ADG659YRQZ
ADG659YRQZ by Analog Devices is a 16-terminal CMOS differential multiplexer with 4 channels. It operates at temperatures from -40 to 125 °C and has a max seated height of 1.7526 mm. Suitable for automotive applications, it features a small outline package style and matte tin terminal finish.
ALSO OPERATE WITH 2 V TO 12 V
4.9022 mm
-2 V
90 dB
400 ohm
SSOP16,.25
3/5/+-5
1.7526 mm
.001 mA
110 ns
490 ns
.635 mm
3.9116 mm
ADG811YRUZ
ADG811YRUZ by Analog Devices is a CMOS SPST switch with 4 functions, 0.72 ohm Ron, and 30 ns switch-on time. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and 67 dB isolation level. Package style: small outline, thin profile, shrink pitch.
67 dB
.04 ohm
.72 ohm
1.8/3.3
1.65 V
8 ns
STG3684AQTR
STMicroelectronics
STG3684AQTR by STMicroelectronics is a CMOS SPDT switch with a max on-state resistance of 0.7Ω and operates b/w 1.65V to 4.3V. It features a compact 3mm x 3mm package, ideal for space-constrained applications. With military-grade temp range (-55 °C to 125 °C), it's perfect for demanding environments.
2-CHANNEL MUX/DEMUX
S-XQCC-N16
3 mm
66 dB
.1 ohm
.7 ohm
UNSPECIFIED
HVQCCN
LCC16,.12SQ,20
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
1 mm
4.3 V
85 ns
NO LEAD
.5 mm
QUAD
TS5N118DBQR
TS5N118DBQR by Texas Instruments is a 16-terminal single-ended multiplexer with a nominal voltage of 5V. It features a max on-state resistance of 12.5 ohm, separate output, and industrial temperature grade. Ideal for applications requiring small outline switches with high isolation and fast switching times.
10 V
4.9 mm
50 dB
12.5 ohm
10 mA
5.25 V
4.75 V
200 ns
ADG508FBRUZ-REEL7
ADG508FBRUZ-REEL7 by Analog Devices is an 8-channel CMOS multiplexer with a max on-state resistance of 390 ohm and switching voltage of +-15 V. It is ideal for industrial applications requiring high off-state isolation, fast switch-on/off times, and low signal current consumption.
ACTIVE OVERVOLTAGE PROTECTION
-16.5 V
-13.5 V
93 dB
8.1 ohm
390 ohm
+-15
16.5 V
13.5 V
300 ns
ADG508FBRUZ
ADG508FBRUZ by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at temperatures from -40 to 85 °C and has a max on-state resistance of 390 ohm. With a package style of small outline, thin profile, shrink pitch, it is ideal for industrial applications requiring precise signal switching.
ADG509FBRUZ-REEL7
ADG509FBRUZ-REEL7 by Analog Devices is a CMOS differential multiplexer with 4 channels. It operates at industrial temperature grade, with on-state resistance of 390 ohm and off-state isolation of 93 dB. Ideal for applications requiring precise signal switching in compact designs.
ADG509FBRUZ
ADG509FBRUZ by Analog Devices is a CMOS differential multiplexer with 4 channels. It has a max on-state resistance of 390 ohm and nominal off-state isolation of 93 dB. Ideal for industrial applications requiring fast switching times and high signal current capabilities.
ADG611YRZ
ADG611YRZ by Analog Devices is a CMOS SPST switch with 4 functions, operating at -40 to 125 °C. With a max on-state resistance of 115 ohm and switching time of 260 ns, it's ideal for automotive applications requiring low power consumption and high isolation levels. This small outline package features separate outputs and break-before-make switching for precise signal control in compact designs.
-5.5 V
-2.7 V
65 dB
115 ohm
2.7 V
65 ns
260 ns
ADG811YCPZ-REEL
ADG811YCPZ-REEL by Analog Devices is a CMOS SPST switch with 4 functions, 0.72 ohm Ron, and 30 ns switch-on time. Ideal for automotive applications due to its 67 dB isolation, 1.65-3.6 V supply range, and -40 to 125 °C operating temperature.
NB7V72MMNHTBG
NB7V72MMNHTBG by Onsemi is a CMOS video multiplexer with 2 channels. It operates at industrial temperature grade (-40 to 85°C) and has a nominal voltage of 1.8V. This surface-mount chip carrier with very thin profile is suitable for applications requiring separate output signals in compact spaces.
VIDEO MULTIPLEXER
1.8/2.5
2.625 V
1.71 V
1.8 V
NICKEL GOLD PALLADIUM
SW06GSZ
The Analog Devices SW06GSZ is a 4-function SPST multiplexer with 16 terminals in a small outline package. It operates b/w -40 to 85°C, with a max on-state resistance of 150 ohm and off-state isolation of 58 dB. Ideal for industrial applications requiring precise signal switching within tight space constraints.
10.3 mm
58 dB
150 ohm
2.65 mm
500 ns
700 ns
BIMOS
7.5 mm
ADG633YCPZ
ADG633YCPZ by Analog Devices is a 3-function multiplexer with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 75 ohm, switching time of 95 ns, and off-state isolation of 90 dB. Ideal for industrial applications requiring precise signal routing in compact spaces.
ALSO OPERATES WITH 2V TO 12V SINGLE SUPPLY
4 mm
.8 ohm
75 ohm
LCC16,.16SQ,25
40 ns
95 ns
ADG1608BRUZ
ADG1608BRUZ by Analog Devices is a CMOS single-ended multiplexer with 8 channels, on-state resistance of 5 ohm, and max signal current of 0.29 A. It operates in automotive-grade temperature range from -40 to 125 °C and is ideal for applications requiring high-speed switching with low on-state resistance.
-8 V
-3.3 V
64 dB
.12 ohm
3.3/12/+-5
.29 A
.48 mA
8 V
202 ns
160 ns
ADG1633BRUZ-REEL7
ADG1633BRUZ-REEL7 by Analog Devices is a CMOS SPDT multiplexer with 16 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 5 ohm and switching time of 98 ns. Ideal for automotive applications due to its small size, low power consumption, and high isolation level of 64 dB.
+-3.3/+-8/3.3/16
259 ns
98 ns
NLAS3699BMN1R2G
NLAS3699BMN1R2G by Onsemi is a 16-terminal DPDT chip carrier switch with 2 functions. It operates at -40 to 85 °C, with Vsup ranging from 1.65V to 4.5V and Ron of 0.75 ohm. Ideal for industrial applications requiring fast switching times and high isolation levels up to 62 dB.
DPDT
.06 ohm
.75 ohm
1.8/4
60 ns
TIN
NLAS3799BMNR2G
NLAS3799BMNR2G by Onsemi is a 16-terminal DPDT chip carrier switch with 2 functions. It operates at temperatures from -40 to 85 °C, with a supply voltage range of 1.65-4.5V. Ideal for industrial applications requiring low on-state resistance and high off-state isolation.
R-XQCC-N16
2.6 mm
69 dB
.05 ohm
.5 ohm
VQCCN
LCC16,.07X.1,16
CHIP CARRIER, VERY THIN PROFILE
.8 mm
50 ns
.4 mm
1.8 mm
NLAS3799LMNR2G
NLAS3799LMNR2G by Onsemi is a 16-terminal DPDT chip carrier switch with 2 functions. It operates at a supply voltage range of 1.65V to 3.6V and offers a max on-state resistance of 0.5 ohm. Ideal for industrial applications requiring fast switching times and high isolation levels up to 69 dB.
NLAST9431MTR2G
NLAST9431MTR2G by Onsemi is a CMOS DPDT switch with 2 functions, 16 terminals, and 93 dB isolation. It operates b/w -55 to 125 °C, ideal for military-grade applications requiring separate outputs and fast switching times of 41 ns on-state and 18 ns off-state.
CAN BE USED AS QUAD 2-TO-1 MULTIPLEXER-DEMULTIPLEXER
105 ohm
2.5/5
18 ns
41 ns
ADG5412BRUZ
ADG5412BRUZ by Analog Devices is a CMOS SPST switch with 4 functions, 16 terminals, and 11 ohm on-state resistance. It operates at -40 to 125 °C and has a supply voltage range of +-9/+-22/9/40 V. Ideal for automotive applications due to its small outline package and separate output feature.
S-PDSO-N16
78 dB
.35 ohm
11 ohm
+-9/+-22/9/40
182 ns
262 ns
© 2023 All rights reserved
