Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Crystal oscillators are electronic components that generate stable and precise frequency signals for various applications. They are widely used in electronic devices and systems that require a precise frequency source, such as clocks, radios, and telecommunications equipment.Crystal oscillators consist of a quartz crystal resonator, which is cut to vibrate at a specific frequency when an AC voltage is applied across it. The resonance frequency is determined by the dimensions of the crystal and the properties of the quartz material, which have a high Q-factor and temperature stability. The crystal resonator is connected to an amplifier circuit that provides feedback and controls the frequency of the output signal.Crystal oscillators offer several advantages over other types of frequency sources, including high accuracy, stability, and low phase noise. They can operate at a wide range of frequencies, ranging from a few kilohertz to several gigahertz, and they are available in different package sizes and configurations, including through-hole and surface-mount.Crystal oscillators come in different types, such as Pierce, Colpitts, and Butler, each with different characteristics and performance levels. They are also available in different tolerances and stability levels, depending on the application and the required performance
Add filters
All
Selected
FL1660003
Diodes Incorporated
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Series Resistance: 80 ohm; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Nominal Operating Frequency: 16.6 MHz;
AT-CUT; TR
3 PPM/FIRST YEAR
PARALLEL - FUNDAMENTAL
10 uW
e4
SURFACE MOUNT
16.6 MHz
L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch)
80 ohm
GOLD OVER NICKEL
FL1690007
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Nominal Operating Frequency: 16.9 MHz; Additional Features: AT-CUT; TR; Drive Level: 10 uW;
16.9 MHz
FL1720002
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4;
17.2 MHz
FL1840001
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Series Resistance: 80 ohm; Additional Features: AT-CUT; TR;
18.4 MHz
FL1840008
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Series Resistance: 80 ohm; Terminal Finish: GOLD OVER NICKEL; Nominal Operating Frequency: 18.4 MHz;
FL1920028
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Series Resistance: 80 ohm; Terminal Finish: GOLD OVER NICKEL;
19.2 MHz
FL1920029
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Series Resistance: 80 ohm; JESD-609 Code: e4;
FL1920033
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; Drive Level: 10 uW; JESD-609 Code: e4;
FL1920045
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: 10 uW; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Additional Features: AT-CUT; TR;
FL1920047
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: 10 uW; Series Resistance: 80 ohm; Terminal Finish: GOLD OVER NICKEL;
FL1920048
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4;
FL1920051
Diodes Inc. FL1920051 is a 19.2 MHz crystal oscillator with 80 ohm series resistance and 3 PPM aging rate. Ideal for surface mount applications, it features parallel fundamental type and gold over nickel terminal finish, ensuring reliable performance in various electronic devices.
FL1920053Z
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Terminal Finish: GOLD OVER NICKEL; Series Resistance: 80 ohm;
FL1940006
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Series Resistance: 80 ohm; Nominal Operating Frequency: 19.4 MHz; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
19.4 MHz
FL1960003
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Additional Features: AT-CUT; TR; Series Resistance: 80 ohm;
19.6 MHz
FL2000006
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: 10 uW; Series Resistance: 60 ohm; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
20 MHz
60 ohm
FL2000023
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; JESD-609 Code: e4; Nominal Operating Frequency: 20 MHz;
FL2000026
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Nominal Operating Frequency: 20 MHz; Drive Level: 10 uW;
FL2000028
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: 10 uW; Nominal Operating Frequency: 20 MHz; JESD-609 Code: e4;
FL2000033
FL2000034
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Series Resistance: 60 ohm; Terminal Finish: GOLD OVER NICKEL; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL2000038Q
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4; Physical Dimension: L3.2XB2.5XH0.68 (mm)/L0.126XB0.098XH0.027 (inch);
AT-CUT; AEC-Q200; TR
L3.2XB2.5XH0.68 (mm)/L0.126XB0.098XH0.027 (inch)
FL2000041
FL2000043
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Nominal Operating Frequency: 20 MHz; Additional Features: AT-CUT; TR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL2000051
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Nominal Operating Frequency: 20 MHz; Drive Level: 10 uW; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL2000056
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Terminal Finish: GOLD OVER NICKEL; Drive Level: 10 uW;
FL2000057
Diodes Inc. FL2000057 crystal oscillator has 60 ohm series resistance, operates at 20 MHz frequency with 3 PPM aging. Ideal for surface mount applications, it features parallel fundamental type and gold over nickel terminal finish.
FL2000058
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; Drive Level: 10 uW; Series Resistance: 60 ohm;
FL2000060
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; Series Resistance: 60 ohm; Drive Level: 10 uW;
FL2000061
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; Series Resistance: 60 ohm; Additional Features: AT-CUT; TR;
FL2000067
FL2000070
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4; Drive Level: 10 uW;
FL2000072
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Drive Level: 10 uW;
FL2000079
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; Terminal Finish: GOLD OVER NICKEL; Series Resistance: 60 ohm;
FL2000082
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Additional Features: AT-CUT; TR; Drive Level: 10 uW;
FL2000083
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Terminal Finish: GOLD OVER NICKEL;
FL2000084
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: 10 uW; Additional Features: AT-CUT; TR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL2000086
FL2000087
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Series Resistance: 60 ohm; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Additional Features: AT-CUT; TR;
FL2000089
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Nominal Operating Frequency: 20 MHz; Series Resistance: 60 ohm; Additional Features: AT-CUT; TR;
FL2000092
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Series Resistance: 60 ohm;
FL2000099A
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Series Resistance: 60 ohm; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); JESD-609 Code: e4;
FL2000104
Diodes Inc. FL2000104 crystal oscillator has 60 ohm series resistance, operates at 20 MHz frequency with 3 PPM aging. It is a surface mount component with gold over nickel finish, suitable for various electronic applications.
FL2000107
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Nominal Operating Frequency: 20 MHz; JESD-609 Code: e4; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL2000108
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Drive Level: 10 uW; Terminal Finish: GOLD OVER NICKEL;
FL2000114
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Terminal Finish: GOLD OVER NICKEL; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL2000117
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: 10 uW; Terminal Finish: GOLD OVER NICKEL; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL2000120
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Nominal Operating Frequency: 20 MHz; Terminal Finish: GOLD OVER NICKEL;
© 2023 All rights reserved
