Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Nominal Operating Frequency: 20 MHz; Drive Level: 10 uW; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
AZTECH Wire
1+ parts
$11.320
100+ parts
1k+ parts
10k+ parts
QUARKTWIN TECHNOLOGY LTD
Northwest PG Solutions
Native Components
Crystal Oscillators FL2000051 attributes and parameters. Explore more Crystal Oscillators devices from Diodes Incorporated
Additional Features:
Aging:
Crystal or Resonator Type:
Drive Level:
JESD-609 Code:
Mounting Feature:
Nominal Operating Frequency:
Physical Dimension:
Series Resistance:
Terminal Finish:
FL2000051 Crystals & Resonators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.60.00.50
SB
8541.60.00.25
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Rochester Electronics
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
1552200168
Molex
WIRE AND CABLE;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
TSX-322524.0000MF15X-AC3
Seiko Epson
The Seiko Epson TSX-322524.0000MF15X-AC3 is a crystal oscillator with a frequency tolerance of 10 ppm and series resistance of 40 ohm. It is commonly used in applications requiring a nominal operating frequency of 24 MHz, such as surface mount devices.
ABS06-127-32.768KHZ-T
Abracon
Abracon's ABS06-127-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in parallel fundamental type circuits with -40 to 85 °C operating range.
FKFSREIHM0.032768-T3
Abracon's FKFSREIHM0.032768-T3 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices or industrial sensors. Operating range from -40 to 85 °C with matte tin finish and surface mount feature.
ABM3-8.000MHZ-B4Y-T
ABM3-8.000MHZ-B4Y-T by Abracon is a 8 MHz Crystal Oscillator with 30 ppm Frequency Tolerance and 140 ohm Series Resistance. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications equipment and industrial automation systems.
ABS25-32.768KHZ-6-1-T
Abracon's ABS25-32.768KHZ-6-1-T crystal oscillator offers 10 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.
ABM10-25.000MHZ-E20-T
ABM10-25.000MHZ-E20-T by Abracon is a crystal oscillator with 25MHz frequency, 20ppm tolerance, and 20% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and surface mount feature.
ABM7-12.000MHZ-D-4-T
ABM7-12.000MHZ-D-4-T by Abracon is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in a compact surface mount package, operating b/w -40 to 85 °C.
FC-13532.7680KA-A0
Seiko Epson's FC-13532.7680KA-A0 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85 °C with GOLD OVER NICKEL terminal finish for durability.
9HT7-32.768KBZF-T
Txc
9HT7-32.768KBZF-T by Txc is a crystal oscillator with 50 ppm frequency tolerance, 144% stability, and 65000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in a compact surface mount package.
445C25J25M00000
Cts
The Cts 445C25J25M00000 is a crystal oscillator with a frequency tolerance of 20 ppm and frequency stability of 50%. It is commonly used in applications requiring precise timing, such as telecommunications and industrial automation.
ABS05-32.768KHZ-6-T
ABS05-32.768KHZ-6-T by Abracon is a crystal oscillator with a frequency tolerance of 20 ppm and a frequency stability of 72%. It is commonly used in applications requiring precise timing, such as communication systems and microcontrollers.
TSX-322525.0000MF18X-G0
TSX-322525.0000MF18X-G0 by Seiko Epson is a 25 MHz crystal oscillator with 10 ppm frequency tolerance and 18% stability. Ideal for applications requiring precise timing, such as telecommunications equipment and industrial automation systems. Operating temperature range from -40 to 85 °C with surface mount feature for easy installation.
ABLS3-18.432MHZ-D4Y-T
ABLS3-18.432MHZ-D4Y-T by Abracon is a 18.432 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.
403C35D33M00000
403C35D33M00000 by Cts is a 33 MHz Crystal Oscillator with 30 ppm Frequency Tolerance, 50% Stability, and 40 ohm Series Resistance. Ideal for applications requiring precise timing in electronics due to its high stability and low aging rate of 3 PPM/YEAR.
ABLS-25.000MHZ-B-2-F-T
ABLS-25.000MHZ-B-2-F-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C and features a parallel resonator type with matte tin finish.
R1612-26.000-8-F-2020-EXT-TR
Raltron Electronics
Raltron Electronics' R1612-26.000-8-F-2020-EXT-TR is a crystal oscillator with a frequency tolerance of 20 ppm and stability of 20%. It operates at a nominal frequency of 26 MHz and has a load capacitance of 8 pF. This surface mount device is commonly used in applications requiring precise timing and frequency control.
ABC2-24.000MHZ-4-T
Abracon's ABC2-24.000MHZ-4-T crystal oscillator operates at 24 MHz with 30 ppm frequency tolerance and 30% stability. Ideal for surface mount applications, it features a parallel-fundamental crystal type, -10 to 60 °C operating temp range, and Ni/Au terminal finish.
ABM3-12.000MHZ-B2-T
ABM3-12.000MHZ-B2-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20 to 70 °C with surface mount feature for easy installation.
ABM8AIG-8.000MHZ-8-V1R-T
ABM8AIG-8.000MHZ-8-V1R-T by Abracon is an 8 MHz crystal oscillator with 10 ppm frequency tolerance and 150% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 150 °C, featuring a parallel-fundamental crystal type and surface mounting feature.
ECS-120-10-36Q-ES-TR
Ecs International
ECS-120-10-36Q-ES-TR by Ecs International is a crystal oscillator with 12 MHz frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in electronics due to its small size (2.5mm x 2.0mm x 0.5mm) and surface mount feature, operating b/w -40°C to 125°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FL2000104
Diodes Incorporated
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Terminal Finish: GOLD OVER NICKEL;
FL2000033
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: 10 uW; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Additional Features: AT-CUT; TR;
FL2000070
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4; Drive Level: 10 uW;
FL2000061
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; Series Resistance: 60 ohm; Additional Features: AT-CUT; TR;
FL2000041
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Series Resistance: 60 ohm; Terminal Finish: GOLD OVER NICKEL; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL2000072
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Drive Level: 10 uW;
FL2000023
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; JESD-609 Code: e4; Nominal Operating Frequency: 20 MHz;
FL2000034
FL2000056
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch); Terminal Finish: GOLD OVER NICKEL; Drive Level: 10 uW;
FL2000057
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Nominal Operating Frequency: 20 MHz; JESD-609 Code: e4; Additional Features: AT-CUT; TR;
FL2000060
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Additional Features: AT-CUT; TR; Series Resistance: 60 ohm; Drive Level: 10 uW;
FL2000038Q
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4; Physical Dimension: L3.2XB2.5XH0.68 (mm)/L0.126XB0.098XH0.027 (inch);
FL2000067
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; Drive Level: 10 uW; JESD-609 Code: e4;
FL2000028
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: 10 uW; Nominal Operating Frequency: 20 MHz; JESD-609 Code: e4;
FL2000058
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Terminal Finish: GOLD OVER NICKEL; Drive Level: 10 uW; Series Resistance: 60 ohm;
FL2000043
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Nominal Operating Frequency: 20 MHz; Additional Features: AT-CUT; TR; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL2000006
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: 10 uW; Series Resistance: 60 ohm; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
FL2000026
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; JESD-609 Code: e4; Nominal Operating Frequency: 20 MHz; Drive Level: 10 uW;
FL2000038
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 3 PPM/FIRST YEAR; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved