Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
08211X1T32-F
Bel Fuse
Bel Fuse's 08211X1T32-F is a Telecom & Datacom Connector with dimensions of 0.748" x 0.885" x 1.155". It features Insulation Resistance of 1000000000 ohm, Dielectric Withstanding Voltage of 750VAC, and Shell Material made of Copper Alloy. This connector is ideal for board and panel mounting in telecom and datacom applications requiring high insulation resistance and dielectric strength.
HOLE 0.091
.885 inch
1.155 inch
.748 inch
TELECOM AND DATACOM CONNECTOR
NOT SPECIFIED
NOT APPLICABLE
FEMALE AND FEMALE
RECTANGULAR
25 mohm
HYBRID
750VAC
NO
YES
1000000000 ohm
PBT-POLYETHYLENE
LOCKING
MOUNTING FLANGE
RIGHT ANGLE
BOARD AND PANEL
2+1
2
1+1
85
-40 Cel
GENERAL PURPOSE
MIXED
30u
POLARIZED HOUSING
CUL; UL
NICKEL
COPPER ALLOY
.125 inch
2.03
SOLDER
8+4
94V-0
08261K1T43-F
Bel Fuse 08261K1T43-F is a Telecom & Datacom Connector with Filter Feature, Nickel Shell Finish, and Polyamide/Polyethylene Insulator. It has 8 contacts, UL Flammability Code of 94V-0, and Copper Alloy Shell Material. Ideal for board and panel mounting in telecom and datacom applications.
SHIELDED
FEMALE
POLYAMIDE/POLYETHYLENE
8
SS-39200-024
Bel Fuse SS-39200-024 is a telecom & datacom connector with dimensions of 0.57" x 0.47" x 1.75". It has a polycarbonate insulator, nickel shell finish, and 8 contacts. Ideal for commercial applications, it offers durability of 750 cycles and operates b/w -40°C to 85°C.
.47 inch
1.75 inch
.57 inch
PLUG
TELCOM, MODULAR
750 Cycles
CLEAR
POLYCARBONATE
CABLE
1
50u
UL
COMMERCIAL
Telecom and Datacom Connectors
IDC
SS-82000-002
Bel Fuse SS-82000-002 is a Telecom & Datacom Connector with dimensions of 0.619" x 0.654" x 1.073". It has 8 contacts, IDC termination, and operates b/w -40°C to 85°C. Ideal for telecom applications requiring a polarized housing and UL standard compliance.
PANEL MOUNTABLE
.654 inch
1.073 inch
.619 inch
JACK
POLYETHYLENE
STRAIGHT
CABLE AND PANEL
24 AWG
26 AWG
08261A1T23-F
Bel Fuse 08261A1T23-F is a Telecom & Datacom Connector with 8 contacts, POLYAMIDE/POLYETHYLENE insulator, and Tin termination finish. It features a NICKEL shell finish, UL 94V-0 flammability code, and right angle mounting style. Ideal for board and panel mounting in telecommunications and data communication applications.
HOLE .125-.137
.536 inch
1.29 inch
.642 inch
Tin (Sn)
e3
ONE
3
STAGGERED
2.54
CUL, UL
1.02
SS-640810-A-NF-A111
Bel Fuse SS-640810-A-NF-A111 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell material. Featuring 8 contacts in a polarized housing, it is ideal for board mounting applications requiring a right angle mount with staggered PCB contact pattern. This UL-certified connector offers reliable performance in commercial settings.
SPLIT BOARD LOCK
.505 inch
.7 inch
.605 inch
BOARD
NICKEL/TIN
SS-6488-NF-K1
Bel Fuse SS-6488-NF-K1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and 2.54mm terminal pitch. It features a right angle mounting style for board applications with 8 contacts in a polarized housing. This UL-certified connector is ideal for commercial telecommunications and data communication systems.
POLARIZED
.815 inch
TIN/NICKEL
SS-6488S-A-NF-K1
Bel Fuse's SS-6488S-A-NF-K1 is a telecom and datacom connector with a body size of 0.635" x 0.55" x 0.85". It has 8 contacts, a polarization key, and a shell made of copper alloy. This right-angle jack connector is commonly used in commercial applications.
.55 inch
.85 inch
.635 inch
15 mohm
-20 Cel
CSA, UL
SS-6488-NF-A01
Bel Fuse SS-6488-NF-A01 is a Telecom & Datacom Connector with POLYETHYLENE insulator. It has 8 contacts, 2 PCB rows, and 0.815" body depth. Ideal for board mounting with SPLIT BOARD LOCK option, it features right angle mounting style and solder termination for secure connections in telecommunications applications.
SS-6488S-A-NF-50
Bel Fuse SS-6488S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and COPPER ALLOY shell. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring reliable right-angle board connections.
SS-7388H22-NF-50
Bel Fuse SS-7388H22-NF-50 is a 32-contact telecom connector with 1A signal current rating. Featuring 500M ohm insulation resistance, it has a dielectric voltage of 1000VAC and operates b/w -20 to 85°C. Ideal for board mounting in telecom and datacom applications, this UL-certified connector offers reliable performance with female contacts and solder termination.
4 PORT, 8-POSITION EACH
PEG
.99 inch
1.074 inch
1.19 inch
1000VAC
500000000 ohm
4
1 A
32
SS-801010SB-SP50-040-250
Bel Fuse's SS-801010SB-SP50-040-250 is a telecom and datacom connector with a body length of 0.75", width of 0.83", and depth of 1.3". It has a max operating temperature of 85°C, min operating temperature of -40°C, and plating thickness of 50u. This connector is commonly used in commercial applications for cable and panel mounting with wire termination.
.83 inch
1.3 inch
.75 inch
POLYESTER
1.5 A
WIRE
10
SS-641010S-A-NF-RMK4R
Bel Fuse SS-641010S-A-NF-RMK4R is a 10-contact telecom & datacom connector with 0.635"x.55"x.85" dimensions, POLYETHYLENE insulator, and NICKEL/TIN shell finish. It features 30u plating thickness, UL 94V-0 flammability code, and 1.5A signal current rating for board mounting applications requiring reliable right-angle female connectors with staggered PCB contact pattern.
SS-6466-NF-50
Bel Fuse SS-6466-NF-50 is a 6-contact telecom/datacom connector with gold finish, UL94V-0 rating, and 50u plating thickness. Ideal for board mounting in commercial applications, featuring staggered PCB contact pattern and right-angle mounting style. Terminal pitch of 2.54mm with female contacts suitable for solder termination.
.53 inch
GOLD
e4
6
SS-6488S-A-NF-1-01
Bel Fuse SS-6488S-A-NF-1-01 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell. It has 8 contacts in 2 rows, UL 94V-0 flammability code, and SOLDER termination. Ideal for board or panel mounting in telecom applications due to its right angle mounting style and FEMALE contact gender.
SS-651010-A-NF
Bel Fuse SS-651010-A-NF is a 10-contact telecom & datacom connector with 0.615"x.644"x.65" dimensions, POLYETHYLENE insulator, and 30u plating thickness. It features UL 94V-0 flammability rating, 1.5A signal current, and solder termination for commercial applications in telecommunications and data communication systems.
.644 inch
.65 inch
.615 inch
SS-7188S-A-NF-1-50
Bel Fuse SS-7188S-A-NF-1-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for board mounting at a pitch of 2.54mm. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
SS-7188S-A-NF-1
Bel Fuse SS-7188S-A-NF-1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY contacts. Ideal for board mounting with 2.54mm pitch, it features a right-angle jack style for commercial applications requiring reliable connectivity in telecommunications and data communication systems.
GOLD (30)
SS-6488-NF-RMK
Bel Fuse SS-6488-NF-RMK is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and 8 contacts. Ideal for board mounting with SPLIT BOARD LOCK option, it features a COPPER ALLOY shell material and RIGHT ANGLE mounting style. Designed for commercial reliability in telecommunications applications.
SS-650810S-A-NF-01
Bel Fuse SS-650810S-A-NF-01 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 8 contacts, and NICKEL/TIN finish. It has a 0.67" x 0.64" x 0.67" body size for board mounting applications. Featuring SPLIT BOARD LOCK option, it's ideal for telecom and datacom systems requiring reliable female connectors with 2.54mm terminal pitch.
.64 inch
.67 inch
SS-650810S-A-NF-A125
Bel Fuse SS-650810S-A-NF-A125 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell material. It features 8 FEMALE contacts in a JACK body style for BOARD AND PANEL mounting. This UL-certified connector has a 0.67" x 0.67" x 0.75" size and is ideal for commercial applications requiring reliable telecommunications connections.
.18 inch
SS-650810S-A-NF-K1-50
Bel Fuse SS-650810S-A-NF-K1-50 is a Telecom & Datacom Connector with 8 contacts, gold plating (50u), and polyethylene insulator. It has a split board lock mounting option, staggered PCB contact pattern, and solder termination type. Ideal for commercial applications requiring reliable female connectors with polarized housing and UL flammability rating of 94V-0.
.68 inch
GOLD (50)
SS-668802S-A-NF
Bel Fuse SS-668802S-A-NF is a Telecom & Datacom Connector with 16 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC, insulation resistance of 500MΩ, and operates b/w -20 to 85°C. Ideal for board mounting in telecom applications due to its right-angle mounting style and staggered PCB contact pattern.
2 PORTS, 8-POSITION EACH
.865 inch
1.254 inch
FLANGELESS
16
SS-7188S-A-NF-50
Bel Fuse SS-7188S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring right angle mounting with solder termination.
SS-7188S-A-NF-K1
Bel Fuse SS-7188S-A-NF-K1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell material. Featuring 8 contacts in a polarized housing, it is ideal for board mounting with staggered PCB contact pattern at 2.54mm pitch for right-angle mounting applications.
937-SP-301010R-031
Bel Fuse's 937-SP-301010R-031 is a Telecom & Datacom Connector with POLYCARBONATE insulator, UL 94V-0 flammability rating, and 10 contacts. It operates b/w -40 to 85°C, has a plating thickness of 50u, and offers durability up to 750 cycles. Ideal for wire/stranded cable termination in commercial applications.
.312 inch
.46 inch
WIRE, STRANDED
MALE
BLUE
937-SP-301010R-K1
Bel Fuse's 937-SP-301010R-K1 is a Telecom & Datacom Connector with dimensions of 0.46" x 0.331" x 0.885". It has 10 contacts, UL94V-0 rated clear polycarbonate insulator, and operates b/w -40°C to 85°C. Ideal for commercial telecom applications with IDC termination on cables.
POLARIZATION AVAILABLE
.331 inch
937-SP-301010R-K2
Bel Fuse's 937-SP-301010R-K2 is a telecom & datacom connector with dimensions of 0.46" x 0.312" x 0.845". It features 10 contacts, IDC termination, and clear polycarbonate insulator. Ideal for wire/stranded cable connections in commercial applications.
.845 inch
937-SP-3088R-K1-031
Bel Fuse's 937-SP-3088R-K1-031 is a Telecom & Datacom Connector with dimensions of 0.46" x 0.286" x 0.885". It has 8 contacts, POLYCARBONATE insulator, and operates b/w -40°C to 85°C. Ideal for wire/stranded cable termination in telecom applications due to its durability of 750 cycles.
.286 inch
940-SP-3088R-A286
Bel Fuse's 940-SP-3088R-A286 is a telecom and datacom connector with dimensions of 0.46" x 0.312" x 0.845". It has a clear polycarbonate insulator, 1 row loaded, and 8 contacts. This plug-style connector is suitable for wire or stranded cable termination in commercial applications.
937-SP-3088-2PC-A192
Bel Fuse's 937-SP-3088-2PC-A192 is a Telecom & Datacom Connector with dimensions of 0.46" x 0.457" x 0.885". It has 8 contacts, polycarbonate insulator, and operates b/w -40°C to 85°C. Ideal for wire/stranded cable termination in telecom applications due to its durability and UL certification.
ROHS COMPLIANT, BULK PKG
.457 inch
937-SP-360808-A218
Bel Fuse's 937-SP-360808-A218 is a telecom and datacom connector with a polycarbonate insulator material and tin shell finish. It has 8 contacts, uses IDC termination type, and is suitable for cable mounting.
TIN
BRASS
937-SP-361010-A161
Bel Fuse's 937-SP-361010-A161 is a Telecom & Datacom Connector with dimensions of 0.54" x 0.36" x 1.046". Made of Polycarbonate, it has a Tin shell finish and Brass shell material. Featuring 10 contacts in a plug style, it is ideal for telecom and datacom applications requiring IDC termination on cables.
.36 inch
1.046 inch
.54 inch
SS-650810S-A-NF-50
Bel Fuse SS-650810S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 8 FEMALE contacts, and NICKEL/TIN finish. It has 2 PCB rows with 2.54mm pitch, ideal for board mounting applications in telecommunications and data communication systems. The connector features a POLARIZED HOUSING for easy installation and a SOLDER termination type for secure connections.
1-6605310-1
Bel Fuse 1-6605310-1 is a Telecom & Datacom Connector with 8 contacts, made of Brass shell with Nickel finish. It uses POLYETHYLENE TEREPHTALATE/POLYESTER insulator material and has UL Flammability Code 94V-0. Ideal for board and panel mounting in telecom and datacom applications.
MAG45, INBUILT TRANSFORMER
POLYETHYLENE TEREPHTALATE/POLYESTER
SS71800-007F
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mixed Contacts: NO; UL Flammability Code: 94V-0;
SS-60300-016
Bel Fuse SS-60300-016 is a Telecom & Datacom Connector with 0.62"x.57"x.564" dimensions, 8 contacts, and 2 PCB rows. It features POLARIZED HOUSING for UL94V-0 flammability compliance and SPLIT BOARD LOCK mounting option. Ideal for telecom/datacom applications requiring FEMALE connectors with STRAIGHT mounting style and STAGGERED PCB contact pattern.
.564 inch
.62 inch
0.77
SS-666602S-A-NF-50
Bel Fuse SS-666602S-A-NF-50 is a 12-contact telecom & datacom connector with POLYETHYLENE insulator. Featuring NICKEL/TIN finish, it has a terminal pitch of 2.54mm and UL 94V-0 flammability rating. Ideal for board mounting in commercial applications requiring reliable right-angle connections.
2 PORT, 6-POSITION EACH, EMI SHIELDED
.565 inch
.828 inch
1.018 inch
.127 inch
12
SS-666602S-A-NF
Bel Fuse SS-666602S-A-NF is a Telecom & Datacom Connector with 12 contacts, POLYETHYLENE insulator, and NICKEL/TIN shell finish. It has a right angle mounting style, staggered PCB contact pattern, and solder termination type. Ideal for commercial applications requiring reliable telecom and data connections.
SS-800810SB-SP50-040-250
Bel Fuse SS-800810SB-SP50-040-250 is a telecom & datacom connector with gold finish, 10 contacts, and UL 94V-0 flammability rating. It features phosphor bronze contacts, polyethylene insulator, and 50u plating thickness. Ideal for commercial applications in telecom and datacom systems for wire termination on cables and panels.
PHOSPHOR BRONZE
SS74800-031F
Bel Fuse SS74800-031F is a Telecom & Datacom Connector with POLYETHYLENE insulator, 8 FEMALE contacts, and NICKEL/TIN finish. It has a 0.708" x 0.599" x 0.85" body for RIGHT ANGLE mounting on PCBs. Ideal for applications requiring 2.54mm pitch connectors in telecommunications and data communication systems.
PANEL MOUNTABLE, 1 PORT, 8-POSITION EACH
.599 inch
.708 inch
SS-6466-NF-SJ
Bel Fuse's SS-6466-NF-SJ is a Telecom & Datacom Connector with 6 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC, insulation resistance of 500MΩ, and operates b/w -20 to 85°C. Ideal for commercial applications requiring reliable board-mounted connectors with solder termination.
SWITCHING VERSION, LOW PROFILE
.503 inch
.525 inch
L834-1G1T-S7
Bel Fuse's L834-1G1T-S7 is a telecom and datacom connector with 8 contacts. It features a filter, tin over nickel termination contact finish, and a shell made of copper alloy. This right angle connector is commonly used in board and panel mounting applications.
TIN OVER NICKEL
POLYBUTYLENE TEREPHTHALATE/POLYETHYLENE
SS-60400-010
TELECOM AND DATACOM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
SS-60400-021
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
SS-60400-002
Bel Fuse SS-60400-002 is a Telecom & Datacom Connector with POLYETHYLENE insulator. It has 8 contacts, UL 94V-0 flammability rating, and zinc alloy shell material. Ideal for board and panel mounting, it features staggered PCB contact pattern and solder termination for female connectors in telecom applications.
HOLE .055-.063
.842 inch
.412 inch
1.094 inch
#4-40
SCREW
0.76
ZINC ALLOY
.135 inch
A829-1J1T-KM
Bel Fuse A829-1J1T-KM is a Telecom & Datacom Connector with 8 contacts, matte tin finish, and nickel shell. It features polarized housing, staggered PCB contact pattern, and solder termination. Ideal for telecom applications requiring right-angle mounting on boards or panels with operating temperatures from -40 to 100°C.
.495 inch
.945 inch
.802 inch
MATTE TIN
BLACK
100
.13 inch
SS-60400-024
Bel Fuse SS-60400-024 is a telecom & datacom connector with 8 contacts, UL 94V-0 flammability rating, and POLYETHYLENE insulator. It features a right angle mounting style, staggered PCB contact pattern with 1.52mm spacing, and solder termination. Ideal for board and panel mounting applications in telecommunications and data communication systems.
.791 inch
.8 inch
1.138 inch
1.52
2.04
© 2023 All rights reserved
