Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
ZX62-AB-5PA
Hirose Electric
ZX62-AB-5PA by Hirose Electric is a USB connector with 5 contacts, rated at 1.8A signal current and 100VAC dielectric voltage. With liquid crystal polymer insulator material, it operates b/w -30 to 85°C and has a durability of 10,000 cycles. Ideal for telecom & datacom applications due to its right-angle mounting style on boards.
ROHS COMPLIANT
.11 inch
.197 inch
.295 inch
RECEPTACLE
USB CONNECTOR
NOT SPECIFIED
FEMALE
30 mohm
USB, SER A FLAT
NO
100VAC
10000 Cycles
35.1392
LIQUID CRYSTAL POLYMER
MULTIPLE MATING PARTS AVAILABLE
DETENT
LOCKING
RIGHT ANGLE
BOARD
ONE
1
85
-30 Cel
GENERAL PURPOSE
RECTANGULAR
30u
1.8 A
UL
COMMERCIAL
TIN
STAINLESS STEEL
Telecom and Datacom Connectors
.4064
SURFACE MOUNT
5
94V-0
8.0064
ZX62D-AB-5P8
ZX62D-AB-5P8 by Hirose Electric is a Micro USB2.0 AB connector with 5 contacts, rated at 1A signal current. It features a Liquid Crystal Polymer insulator, operates b/w -30 to 85°C, and has a dielectric voltage of 100VAC. Ideal for telecom/datacom applications, this right-angle receptacle has a surface mount termination on a board with locking mounting option for secure connections.
.22 inch
.329 inch
MICRO USB2.0 AB
35
GRAY
POLARIZED HOUSING
1 A
0.65
8
1734577-4
TE Connectivity
TE Connectivity 1734577-4 is a Telecom & Datacom Connector with EMI shielding, gold flash termination, and glass-filled polyamide46 insulator. It has 8 contacts, rated for 1A signal current, and operates b/w -40 to 85°C. Ideal for telecom and datacom applications requiring durability and reliability in commercial settings.
SHIELDED
PEG
.657 inch
.65 inch
.636 inch
JACK
TELECOM AND DATACOM CONNECTOR
Gold Flash (Au) - with Nickel (Ni) barrier
50 mohm
TELCOM, MODULAR
750 Cycles
YES
200000000 ohm
BLACK
GLASS FILLED POLYAMIDE46
1A
STRAIGHT
BOARD AND PANEL
3
-40 Cel
MIXED
15u
NICKEL
BRASS
.128 inch
1.02
SOLDER
10119313-301CLF
Amphenol Communications Solutions
Amphenol's 10119313-301CLF USB connector features a body length of 0.303", insulation resistance of 100M ohm, and shell finish in nickel. Ideal for telecom & datacom applications, this male connector with 5 contacts is designed for board mounting with solder termination and staggered PCB contact pattern.
LOCATING POSTS
.154 inch
.372 inch
.303 inch
NOT APPLICABLE
MALE
USB, SER B SQ
100000000 ohm
GLASS FILLED POLYETHYLENE
2
STAGGERED
1.8034
POLARIZED KEY
COPPER ALLOY
.079 inch
1.6002
2007567-5
TE Connectivity's 2007567-5 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 12 ports, 240 contacts, and operates b/w -55 to 105°C. Ideal for board mounting in telecom and datacom applications due to its UL94V-0 flammability rating and press-fit termination.
1 PORT, 20 POSITION EACH
115/230VAC
12
105
-55 Cel
.118 inch
0.8
PRESS FIT
240
2007567-7
TE Connectivity's 2007567-7 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 12 ports, 240 contacts, and operates b/w -55 to 105°C. Ideal for board mounting in telecom and datacom applications due to its UL94V-0 flammability rating and press-fit termination.
2007567-8
TE Connectivity 2007567-8 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. It has 12 ports, 240 contacts, and operates b/w -55 to 105°C. Ideal for board mounting in telecom and datacom applications due to UL94V-0 flammability rating and press-fit termination.
1546907-1
TE Connectivity's 1546907-1 is a Telecom & Datacom Connector with EMI shielding, Nylon66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 85°C, rated for 1.5A signal current. Ideal for cable mounting applications in telecom and datacom systems.
PLUG
SOLID
NYLON66
1.5A
CABLE
1.5 A
73725-1180BLF
Amphenol's 73725-1180BLF is a telecom & datacom connector with 0.584" body width, 0.776" depth, and polyethylene insulator. Featuring TIN over nickel termination finish, it has 4 contacts for board mounting in right angle style. Ideal for commercial applications requiring UL 94V-0 flammability code compliance.
TUBE PACKAGING
.584 inch
.776 inch
TIN OVER NICKEL
POLYETHYLENE
e3
FLASH
.09 inch
2.0066
4
47151-1002
Molex
The Molex 47151-1002 is a telecom and datacom connector with a body length of 0.591", width of 0.243", and depth of 0.478". It has an insulation resistance of 10MΩ, dielectric voltage withstand of 300VAC, and a contact finish of Sn/Bi. This connector is commonly used in board mounting applications for telecommunications and data communication systems.
PANEL MOUNTABLE
SOLDER HOLDING POSTS
.243 inch
.478 inch
.591 inch
Tin/Bismuth (Sn/Bi)
300VAC
10000000 ohm
e6
MOUNTING FLANGE
-20 Cel
.5 A
.508
19
3E106-0220KV
3m Electronic Products Division
3m Electronic Products Division's 3E106-0220KV is a Telecom & Datacom Connector with 0.531" body length, 500M ohm insulation resistance, and 700VAC dielectric voltage. Ideal for board mounting with solder holding posts, this male plug connector has a total of 6 contacts and operates b/w -55 to 85°C.
LOW PROFILE, POLARIZED
.331 inch
.531 inch
GOLD (20) OVER NICKEL
700VAC
500000000 ohm
GLASS FILLED POLYESTER
20u
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
6
216005-4
TE Connectivity 216005-4 is a Telecom & Datacom Connector with 0.866" body dimensions. It features POLYBUTYLENE TEREPHTHALATE insulator, UL 94-HB flammability rating, and 1.5A signal current. Ideal for wire and discrete cable types, it offers right-angle mounting with locking option for commercial reliability.
.866 inch
WIRE, DISCRETE
POLYBUTYLENE TEREPHTHALATE
PANEL
70
49.21u
.01 inch
94-HB
22 AWG
26 AWG
5558343-1
TE Connectivity 5558343-1 is a Telecom & Datacom Connector with 0.695" body length, POLYAMIDE insulator, and 500M ohm insulation resistance. It has a PCB contact row spacing of 2.54mm and operates b/w -40 to 85°C. Ideal for telecom and datacom applications due to its UL-rated design and female contact gender.
LOW PROFILE
POLARIZATION POST
.527 inch
.695 inch
POLYAMIDE
2.54
50u
.14 inch
5-6123283-5
TE Connectivity 5-6123283-5 is a Telecom & Datacom Connector with Insulation Resistance of 1MΩ, TIN OVER NICKEL Termination Contact Finish, and 0.715" Body Depth. It features LIQUID CRYSTAL POLYMER Insulator Material and LOCATING POST Board Mounting Option. Ideal for applications requiring a 40-contact MALE PLUG connector with SOLDER termination in telecom and datacom systems.
LOCATING POST
.715 inch
1000000 ohm
39.37u
1.27
40
79610-102
Amphenol Icc
Amphenol Icc 79610-102 is a Telecom & Datacom Connector with 20 contacts, rated at 3A signal current. It features POLYCARBONATE insulator, right-angle mounting style, and solder termination type. With a mating contact pitch of 0.1 inch, it's ideal for commercial applications requiring durable connectors with a polarization key for secure connections.
PACKAGING TRAY, OFF WHITE
.57 inch
.954 inch
1.405 inch
35 mohm
SQ PIN-SKT
1000 Cycles
WHITE
POLYCARBONATE
0.1
3 A
CSA, UL
Headers and Edge Type Connectors
.13 inch
20
10099099-111LF
The Amphenol Icc 10099099-111LF is a telecom/datacom connector with 0.031" mating contact pitch, 300VDC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for board mounting applications in telecom/datacom systems, it features a male contact gender, gold mating finish over nickel, and polyethylene insulator material.
.209 inch
.433 inch
GOLD (30) OVER NICKEL (50)
Tin (Sn) - with Nickel (Ni) barrier
PHOSPHOR BRONZE
20 mohm
300VDC
100 Cycles
1000000000 ohm
0.031
8.2042
.7874
554946-1
TE Connectivity 554946-1 is a 50-contact, 2-row telecom & datacom connector with POLYPHENYLENE OXIDE insulator. It features IDC termination, 0.25" min insulation diameter, and locking mounting option. Ideal for commercial applications requiring reliable cable connections at 115/230VAC.
.25 inch
POLYPHENYLENE OXIDE
D Type Connectors
2.16
IDC
50
87520-4010ALF
87520-4010ALF by Amphenol is a USB connector with 0.571" body length, 1000000000 ohm insulation resistance, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, it features POLYAMIDE46 insulator material, SPLIT BOARD LOCK mounting option, and MATTE TIN termination finish.
SPLIT BOARD LOCK
.28 inch
.551 inch
.571 inch
MATTE TIN OVER NICKEL
USB 2.0 A
750VAC
1500 Cycles
POLYAMIDE46
TIN/NICKEL
10.2304
M702-230642
Harwin PLC
The Harwin PLC M702-230642 is a telecom and datacom connector with a body length of 0.516", body width of 0.315", and body depth of 0.567". It is used for board mounting with a surface mount termination type, and has an insulation resistance of 100000000 ohm.
SOLDER HOLDING FLANGE
.315 inch
.567 inch
.516 inch
GOLD
MATTE TIN
GLASS FILLED POLYAMIDE9T
.9906
USB-B-S-F-W-SM-TR
Samtec
Samtec's USB-B-S-F-W-SM-TR is a right angle USB connector with 4 contacts, suitable for telecom/datacom applications. Made of high temp thermoplastic, it offers durability of 1500 cycles and operates b/w -50°C to 85°C. With a flash plating thickness and nickel shell finish, this female connector has a rectangular PCB contact pattern for surface mount termination.
.429 inch
.63 inch
.472 inch
USB B
HIGH TEMPERATURE THERMOPLASTIC
-50 Cel
1-406541-7
TE Connectivity 1-406541-7 is a telecom & datacom connector with EMI shielding. It has insulation resistance of 500MΩ, rated current of 1.5A, and durability of 750 cycles. Ideal for panel mounting in applications requiring reliable signal transmission at temperatures ranging from -40 to 85°C.
.525 inch
.64 inch
10 mohm
.1 inch
1735284-4
TE Connectivity 1735284-4 is a Telecom & Datacom Connector with 0.05" mating contact pitch, 1.59" body length, and 1000000000 ohm insulation resistance. Ideal for telecom and datacom applications due to its POLYETHYLENE insulator material, Tin (Sn) - Ni termination finish, and UL Flammability Code of 94V-0.
.137 inch
.26 inch
1.59 inch
BELLOWED TYPE
500 Cycles
20.016
0.05
GUIDE PIN
POLARIZED
22
3.9754
KUSBX-AP-KIT-SC
Kycon
Kycon's KUSBX-AP-KIT-SC is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 500VAC and insulation resistance of 1Gohm. Ideal for telecom/datacom applications, this male plug has a white insulator and operates b/w -55 to 85°C.
.177 inch
1.616 inch
500VAC
POLYBUTYLENE TEREPHTHALATE/POLYETHYLENE
A-USB/2-A-TOP-R
Assmann Wsw Components
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
TOP ENTRY
SOLDERABLE RETENTION CLIPS
.614 inch
GOLD (30)
e4
.116 inch
1-1747981-6
TE Connectivity 1-1747981-6 is a PREASSEM CONN telecom/datacom connector with 19 contacts, rated at 0.5A. It operates b/w -25 to 70°C, has TIN finish, and can endure 10000 cycles. Ideal for surface mount board applications due to its right angle receptacle design.
PREASSEM CONN
.5A
-25 Cel
3.937u
.043 inch
2013595-3
TE Connectivity's 2013595-3 is a Telecom & Datacom Connector with EMI shielding, polyethylene insulator, and nickel shell finish. With UL certification and 8 contacts, it operates b/w -40 to 85°C for applications in telecom and datacom systems requiring polarized connectors with a rated current of 1.5A.
2040008-1
TE Connectivity's 2040008-1 is a Telecom & Datacom Connector with EMI shielding, polyethylene insulator, and nickel shell finish. It has 8 contacts, UL flammability rating of 94V-0, and operates b/w -40 to 85°C. Ideal for telecom/datacom applications due to its polarization key and copper alloy shell material for cable mounting.
2040008-2
TE Connectivity's 2040008-2 is an EMI shielded telecom and datacom connector with a polyethylene insulator. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This plug-style connector has 8 contacts and is suitable for cable mounting applications.
8-1747981-1
TE Connectivity 8-1747981-1 is a PREASSEM CONN telecom/datacom connector with 19 contacts, rated at 0.5A. Operating temperature ranges from -25 to 70°C, featuring a TIN shell finish. Ideal for board mounting applications requiring durable female connectors with right-angle mounting style.
1986280-1
TE Connectivity 1986280-1 is a Telecom & Datacom Connector with GLASS FILLED POLYESTER insulator. It has 8 contacts, rated at 1.5A for signal current. Suitable for panel mounting, it supports solid and stranded cable types in applications requiring a temperature range of -40 to 85°C.
SOLID, STRANDED
1987236-3
TE Connectivity 1987236-3 is a Telecom & Datacom Connector with GLASS FILLED POLYCARBONATE insulator. It has 8 contacts, rated at 0.5A for signal current. Suitable for PANEL mounting, it uses STRANDED cables and supports up to 26 AWG wire size.
STRANDED
GLASS FILLED POLYCARBONATE
AU-Y1005-R
AU-Y1005-R by Assmann Wsw Components is a Telecom & Datacom Connector with 4 contacts. It features Insulation Resistance of 1Gohm, Dielectric Withstanding Voltage of 500VAC, and Contact Material made of Phosphor Bronze. Ideal for board mounting applications in telecom and datacom systems, offering reliable performance at temperatures ranging from -55 to 50°C.
.276 inch
.557 inch
GOLD (5)
BRONZE
.122 inch
TM21P-88P(21)
The Hirose Electric TM21P-88P(21) is a Telecom & Datacom Connector with 8 contacts, gold-plated termination, and clear insulator. It has an insulation resistance of 100M ohm, withstands up to 500VAC, and operates b/w -25°C to 60°C. Ideal for telecom and datacom applications requiring durable connectors with male contact gender.
1.758 inch
.528 inch
Gold (Au) - with Nickel (Ni) barrier
230 mohm
200 Cycles
CLEAR
60
CRIMP
ZX62D-B-5P8
ZX62D-B-5P8 by Hirose Electric is a USB connector with 5 contacts, rated at 1.8A signal current. It features gold termination finish, liquid crystal polymer insulator, and stainless steel shell material. Ideal for telecom/datacom applications, it has a durability of 10k cycles and operates b/w -30 to 85°C temperatures.
.635
ZX80-B-5P
ZX80-B-5P by Hirose Electric is a USB connector with 5 contacts, right-angle mounting style, and surface mount termination. It features a stainless steel shell with black insulator made of PBT material. Ideal for telecom & datacom applications due to its compact size (0.295" x 0.118" x 0.315") and UL94V-0 flammability rating.
USB, SER A
1-1734035-3
TE Connectivity USB connector 1-1734035-3 with glass filled polyamide insulator, nickel shell finish, and 0.8mm terminal pitch is ideal for telecom applications. Rated at 1A signal current, it has a durability of 5000 cycles and operates b/w -40 to 85°C temperature range.
SOLDER HOLD DOWN
5000 Cycles
29.92u
.045 inch
2-1734035-1
TE Connectivity's 2-1734035-1 USB connector features GLASS FILLED POLYAMIDE9T insulator, NICKEL shell finish, and 29.92u plating thickness. With a rated current of 1A, it is ideal for telecom applications requiring board mounting with locating post option. Operating temperature ranges from -40 to 85 °C.
1-1734099-2
TE Connectivity 1-1734099-2 is a Telecom & Datacom Connector with 120 contacts, rated at 12V and 1A. Featuring a mating contact pitch of 0.05", it has an insulation resistance of 4MOhm and operates b/w -35°C to +85°C. Ideal for board mounting applications in commercial settings, this connector offers durability up to 500 cycles.
CHAMP
BOARD LOCK
3.391 inch
Tin (Sn)
15 mohm
CENTRONIC
.8896
4000000 ohm
-35 Cel
1.9685u
12 V
Other Rectangular Connectors
120
.139
1-292303-4
TE Connectivity 1-292303-4 is a USB connector with insulator resistance of 1000000000 ohm. It has a body length of 0.517", width of 0.226", and depth of 0.551". Ideal for telecom & datacom applications, it features solderable retention clips for board mounting and operates b/w -55 to 85°C.
.226 inch
.517 inch
UX60-MB-5S8
The Hirose Electric UX60-MB-5S8 is a telecom/datacom connector with 5 contacts, rated for 1A signal current. Featuring a 0.303" body length and 0.156" width, it has an insulation resistance of 100M ohm and operates b/w -30°C to 75°C. Ideal for board mounting applications, this female connector offers durability up to 5000 cycles with a solder termination type.
USB, HIGH SPEED
.156 inch
.354 inch
7.1168
SYNTHETIC RESIN
75
0 inch
1.39
UX60-MB-5ST
The Hirose Electric UX60-MB-5ST is a USB connector with 5 contacts, rated for 1A signal current. Featuring a 0.39" body length and 0.156" width, it has an insulation resistance of 100M ohm. Ideal for telecom/datacom applications, it offers surface mount termination and a durability of 5000 cycles.
.39 inch
UX60A-MB-5ST
The Hirose Electric UX60A-MB-5ST is a Telecom & Datacom Connector with 5 contacts, rated for 1A signal current. Featuring a 0.39" body length and 0.156" width, it has an insulation resistance of 100M ohm. Ideal for board mounting applications in telecom and datacom systems, this connector offers durability up to 5000 cycles at temperatures ranging from -30°C to 75°C.
1-750913-7
TE Connectivity 1-750913-7 is a Telecom & Datacom Connector with EMI Shielding, Polyester Insulator, and Tin/Lead Termination. It has 68 contacts, rated for 1A signal current, suitable for commercial applications in telecom and datacom systems. Operating temperature range from -55 to 105°C makes it versatile for various environments.
AMPLIMITE
ROUND
Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier
25 mohm
133.44
.029 inch
POLYESTER
e0
TIN-NICKEL
STEEL
68
28 AWG
30 AWG
13.344
RJF22G00
Amphenol
RJF22G00 by Amphenol is a Telecom & Datacom Connector with 8 contacts, CADMIUM shell finish, and -40 to 85°C operating temperature range. It features POLARIZED HOUSING for UL-rated durability in board mounting applications. Ideal for telecom and datacom systems requiring reliable female connectors with staggered PCB contact pattern.
CADMIUM
METAL
2170129-1
TE Connectivity's 2170129-1 is a Telecom & Datacom Connector with EMI shielding. It features a body size of 0.642" x 0.512" x 0.941", UL 94V-0 flammability rating, and 8 contacts for signal current up to 1A. Ideal for board mounting in telecom applications requiring right-angle jack connectors with staggered PCB contact pattern.
.512 inch
.941 inch
.642 inch
0 Cel
1.969u
1.25
1-1546405-1
TE Connectivity 1-1546405-1 is a Telecom & Datacom Connector with ABS insulator, 8 contacts, and 2 PCB rows. It operates b/w -20°C to 80°C, rated at 1.5A for signal current. Ideal for telecom applications requiring polarized housing and solder termination on panel mounting.
.125 inch
ACRYLONITRILE BUTADIENE STYRENE
#1-14 UNC-2A
SCREW
80
1-1546409-1
TE Connectivity 1-1546409-1 is a Telecom & Datacom Connector with 0.082" Body Depth, ABS Insulator, and -20 to 80°C Operating Temp. It has 8 contacts for 1.5A signal current, suitable for panel mounting in telecom applications requiring polarized housing and solder termination.
.082 inch
#1-14 UNC
1-1546411-1
TE Connectivity 1-1546411-1 is a Telecom & Datacom Connector with ABS insulator, operating temp range -20 to 80°C. It has 8 contacts, rated current of 1.5A, and female contact gender. Used in telecom applications for signal transmission with solid/stranded cables and screw or #1-14 UNC mounting options.
© 2023 All rights reserved
