Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
1-1546412-1
TE Connectivity
TE Connectivity 1-1546412-1 is a Telecom & Datacom Connector with ABS insulator, operating temp -20 to 80°C. Features polarized housing, 8 contacts, rated current 1.5A. Ideal for telecom and datacom applications requiring panel mounting with solder termination.
RECEPTACLE
SOLID, STRANDED
TELECOM AND DATACOM CONNECTOR
NOT SPECIFIED
FEMALE
RECTANGULAR
TELCOM, MODULAR
NO
YES
ACRYLONITRILE BUTADIENE STYRENE
1.5A
#1-14 UNC
SCREW
PANEL
ONE
1
80
-20 Cel
GENERAL PURPOSE
POLARIZED HOUSING
1.5 A
SOLDER
8
1-1734509-4
TE Connectivity 1-1734509-4 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 rated. It has 8 contacts, insulation resistance of 200M ohm, and operates b/w -40 to 85°C. Ideal for board mounting in telecom applications due to its durability and polarization features.
LOW PROFILE
PEG
.445 inch
.638 inch
JACK
Tin (Sn) - with Nickel (Ni) barrier
50 mohm
750 Cycles
200000000 ohm
BLACK
GLASS FILLED POLYAMIDE46
e3
1A
LOCKING
RIGHT ANGLE
BOARD
3
85
-40 Cel
MIXED
50u
1 A
UL
COMMERCIAL
TIN
BRASS
Telecom and Datacom Connectors
.087 inch
1.02
94V-0
1546413-3
TE Connectivity 1546413-3 is a Telecom & Datacom Connector with EMI shielding, ABS insulator, and 30u plating. It has 8 contacts, rated for 1.5A signal current, suitable for panel mounting in applications requiring reliable data transmission at temperatures ranging from -20 to 80°C.
APPLICABLE CABLE: RJ 45
NOT APPLICABLE
#1-14
STRAIGHT
30u
1546414-4
TE Connectivity's 1546414-4 is a Telecom & Datacom Connector with ABS insulator, operating from -20 to 80°C. Featuring 8 contacts, it supports 1.5A signal current and accepts up to 26 AWG wire size. Ideal for panel mounting in applications requiring female receptacle connectors with solder termination.
26 AWG
1734509-2
TE Connectivity 1734509-2 is a Telecom & Datacom Connector with EMI shielding. It has 8 contacts, glass-filled polyamide46 insulator, and solder termination. Ideal for telecom applications requiring high insulation resistance and durability up to 750 cycles.
15u
74441-0007
Molex
Molex 74441-0007 is a Telecom & Datacom Connector with 0.031" mating contact pitch, suitable for board mounting with 0.8mm terminal pitch. Featuring 30 contacts, it has a max operating temperature of 85°C and UL flammability rating of 94V-0. Ideal for commercial applications requiring right-angle mounting and surface mount termination.
HIGH SPEED
.212 inch
.324 inch
.591 inch
PLUG
STAGGERED
BELLOWED TYPE
.973
GLASS FILLED POLYETHYLENE
0.031
MULTIPLE MATING PARTS AVAILABLE
2
8.2042
.5 A
Headers and Edge Type Connectors
.8
SURFACE MOUNT
30
1-292303-1
TE Connectivity 1-292303-1 is a USB connector with POLYETHYLENE insulator, suitable for Telecom & Datacom applications. Features SOLDERABLE RETENTION CLIPS for board mounting, TIN shell finish, and FEMALE contact gender. Operates b/w -55 to 85°C with UL 94V-0 flammability rating.
SOLDERABLE RETENTION CLIPS
USB CONNECTOR
USB2.0 A
1500 Cycles
POLYETHYLENE
-55 Cel
29.92u
COPPER ALLOY
.073 inch
4
292303-7
TE Connectivity's 292303-7 is a telecom and datacom connector with a max operating temperature of 85°C and a min operating temperature of -55°C. It has a shell material made of copper alloy, with a tin finish and solderable retention clips for board mounting. This connector is commonly used in telecommunications and data communication applications.
NATURAL
.112 inch
937-SP-361010-A161
Bel Fuse
Bel Fuse's 937-SP-361010-A161 is a Telecom & Datacom Connector with dimensions of 0.54" x 0.36" x 1.046". Made of Polycarbonate, it has a Tin shell finish and Brass shell material. Featuring 10 contacts in a plug style, it is ideal for telecom and datacom applications requiring IDC termination on cables.
.36 inch
1.046 inch
.54 inch
MALE
CLEAR
POLYCARBONATE
CABLE
IDC
10
1-5750913-9
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .293 inch;
AMPLIMITE
.293 inch
.261 inch
2.829 inch
ROUND
PREASSEM CONN
Nickel/Gold (Ni/Au)
25 mohm
500 Cycles
1000000000 ohm
GRAY
POLYESTER
e4
0.05
0.1
105
TIN-NICKEL
STEEL
Other Rectangular Connectors
1.27
100
28 AWG
30 AWG
5749111-6
TE Connectivity 5749111-6 is a telecom & datacom connector with 68 contacts, 0.05" pitch, and EMI shielding. It has a body length of 2.029", insulation resistance of 1G ohm, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring durable male connectors with IDC termination on round cables.
2.029 inch
SQ PIN-SKT
800 Cycles
68
5749111-8
TE Connectivity 5749111-8 is a Telecom & Datacom Connector with 100 contacts, Matte Tin finish, and EMI shielding. It has a body length of 2.829" and operates b/w -55°C to 105°C. Ideal for telecom applications requiring durable connectors with high insulation resistance.
Matte Tin (Sn) - with Nickel (Ni) barrier
5749210-7
TE Connectivity's 5749210-7 is a telecom & datacom connector with EMI shielding, polyethylene insulator, and 2 loaded rows. It operates b/w -55 to 105°C, has 68 contacts, and supports round cable mounting. Ideal for applications requiring high signal current capacity in telecommunications and data communication systems.
5749621-4
TE Connectivity's 5749621-4 is a telecom & datacom connector with 40 contacts, 0.05" mating contact pitch, and 1A signal current rating. It features EMI shielding, polyethylene insulation, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable connectivity in telecommunications and data communication systems.
1.329 inch
.029 inch
LATCHING
D Type Connectors
40
5749621-8
TE Connectivity 5749621-8 is a Telecom & Datacom Connector with 80 contacts, 0.05" pitch, and EMI shielding. Ideal for telecom applications, it has a temperature range of -55 to 105°C and insulation resistance of 1G ohm.
2.329 inch
5749621-9
TE Connectivity 5749621-9 is a telecom & datacom connector with 100 contacts, 0.05" pitch, and EMI shielding. Ideal for commercial applications, it has a temperature range of -55 to 105°C and insulation resistance of 1 Gohm. The connector features male contact gender, steel shell material, and IDC termination type.
5749699-7
TE Connectivity 5749699-7 is a telecom & datacom connector with 68 contacts, 0.05" pitch, and EMI shielding. Ideal for commercial applications, it has a temperature range of -55 to 105°C and offers high durability with 800 cycles.
.592 inch
5750913-5
TE Connectivity 5750913-5 is a Telecom & Datacom Connector with 50 contacts, 0.05" pitch, and EMI shielding. Ideal for telecom applications, it has a durable steel shell, polyester insulator, and operates b/w -55°C to 105°C.
1.579 inch
50
5750913-7
TE Connectivity 5750913-7 is a Telecom & Datacom Connector with 68 contacts, rated at 1A. It features EMI shielding, polyester insulation, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring durable male connectors with IDC termination on round cable mounting.
1888250-1
TE Connectivity 1888250-1 is a Telecom & Datacom Connector with EMI shielding, POLYETHYLENE insulator, and 500M ohm insulation resistance. It features a 0.641" body length, 0.456" width, and 0.165" depth. Ideal for telecom applications requiring durable connectors with high insulation resistance.
SPLIT BOARD LOCK
.456 inch
.165 inch
.641 inch
30 mohm
500000000 ohm
115/230VAC
MOUNTING FLANGE
BOARD AND PANEL
.6 A
NICKEL
.091 inch
PRESS FIT
1888250-2
TE Connectivity 1888250-2 is a Telecom & Datacom Connector with EMI Shielding, Insulation Resistance of 500MΩ, and rated for 0.6A signal current. It features POLYETHYLENE insulator, COPPER ALLOY shell material, and PRESS FIT termination. Ideal for telecom applications requiring durability up to 750 cycles.
USB-A-S-S-B-SM2
Samtec
USB-A-S-S-B-SM2 by Samtec is a USB connector with 4 contacts, gold mating finish, and matte tin termination. It is used in telecom & datacom applications for board mounting with a right-angle shell style. Operating temperature ranges from -50 to 85°C, offering durability of 1500 cycles.
.272 inch
.646 inch
GOLD (30)
MATTE TIN OVER NICKEL
USB, SER A FLAT
POLYAMIDE
-50 Cel
POLAR PIN POSITION
2.0066
USB-A-S-S-W-SM2
USB-A-S-S-W-SM2 by Samtec is a USB connector with POLYAMIDE insulator, MATTE TIN finish, and COPPER ALLOY shell. It has 4 contacts, operates b/w -50 to 85°C, and offers 1500 cycles durability. Ideal for telecom/datacom applications requiring a reliable surface mount right-angle connection.
MATTE TIN
5-216792-0
TE Connectivity 5-216792-0 is a Telecom & Datacom Connector with 50 contacts, rated at 1A. It features a mating contact pitch of 0.1", insulation resistance of 5Gohm, and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable signal connections on PCBs with board mounting options.
SOLDERED DIRECTLY TO THE BOARD
BOARD LOCK
.264 inch
2.7 inch
Tin (Sn)
15 mohm
DUAL PRONG
5000000000 ohm
-65 Cel
2.54
98u
.114 inch
1735452-1
TE Connectivity's 1735452-1 is a POLYETHYLENE telecom connector with 16 contacts, rated at 1.5A for signal current. It operates b/w -40 to 85 °C and features a UL Flammability Code of 94V-0. Ideal for board mounting in telecom and datacom applications due to its right angle plug design.
.157 inch
POLARIZED
16
1735452-4
TE Connectivity's 1735452-4 is a Telecom & Datacom Connector with POLYETHYLENE insulator, rated for -40 to 85°C. Featuring 16 contacts, it has a signal current of 1.5A and UL94V-0 flammability rating. Ideal for board mounting in telecom and datacom applications.
MQ172-3PA-(55)
Hirose Electric
The Hirose Electric MQ172-3PA-(55) is a Telecom & Datacom Connector with 3 contacts, Tin termination finish, and 30mohm contact resistance. It has a temperature range of -30 to 75°C and features a right angle mounting style with locking option. Ideal for commercial applications requiring high insulation resistance and UL flammability rating.
75
-30 Cel
STAINLESS STEEL
.7874
MQ172X-4SA-CV(50)
MQ172X-4SA-CV(50) by Hirose Electric is a telecom & datacom connector with insulation resistance of 1 Gohm, operating temperature range of -30 to 75°C, and rated current of 3A. It features a stainless steel shell, male contact gender, and UL flammability rating of 94V-0. Ideal for commercial applications requiring reliable crimp termination in black insulator color.
SHIELDED
SYNTHETIC RESIN
3 A
CRIMP
3-5229912-1
TE Connectivity 3-5229912-1 is a telecom & datacom connector with EMI shielding. It has 50 contacts, rated at 1A signal current. With a mating contact pitch of 0.085", it is suitable for applications requiring reliable commercial-grade connectors in telecommunications and data communication systems.
.605 inch
.495 inch
3.28 inch
DISCRETE, ROUND
CENTRONIC
.5 inch
POLYPHENYLENE OXIDE
0.085
#4-40 UNC 2B
SCREWLOCKS
2.16
24 AWG
HDMR-19-02-S-SM
Samtec's HDMR-19-02-S-SM is a Telecom & Datacom Connector with 19 contacts, rated for 1.2A signal current. It features Tin (Sn) termination with Nickel (Ni) barrier, Gold mating contact finish, and POLYETHYLENE insulator material. Ideal for board mounting in commercial applications requiring durability and reliability.
HDMI
.479 inch
.677 inch
100 Cycles
-25 Cel
1.2 A
.508
19
USBR-B-S-S-O-VT
The Samtec USBR-B-S-S-O-VT is a USB connector with 4 contacts, high temp thermoplastic insulator, and nickel shell finish. It has a durability of 1500 cycles and operates b/w -50°C to 85°C. Ideal for telecom & datacom applications, it features solder termination and board mounting with retention clips.
RETENTION CLIPS
.437 inch
.634 inch
.476 inch
USB B
3.2804
HIGH TEMPERATURE THERMOPLASTIC
3.1692
DX2R005HN2E700
Japan Aviation Electronics Industry
DX2R005HN2E700 by Japan Aviation Electronics Industry is a Telecom & Datacom Connector with 5 contacts, rated for 1A signal current. It features a body length of 0.389", insulation resistance of 100M ohm, and operates b/w -20 to 60°C. Ideal for commercial applications requiring durable connectors with right-angle mounting and solder termination.
EMBOSSED TAPE PACKAGING
.156 inch
.362 inch
.389 inch
GOLD (30) OVER NICKEL
TIN COPPER OVER NICKEL
USB, SER B SQ
5000 Cycles
100000000 ohm
GLASS FILLED POLYAMIDE
e2
60
5
5-1761183-2
TE Connectivity 5-1761183-2 is a Telecom & Datacom Connector with GLASS FILLED POLYESTER insulator. It has 6 contacts, rated at 1.5A for signal current. The connector is designed for board mounting applications with solder termination, operating b/w -20 to 80°C.
GLASS FILLED POLYESTER
E
6
520437-1
TE Connectivity's 520437-1 is a POLYCARBONATE TELECOM AND DATACOM CONNECTOR with UL 94V-2 flammability rating. Featuring 8 contacts, it is a male plug for round cable mounting at 115/230VAC. Ideal for telecom and datacom applications meeting CSA and UL standards.
SMOKE-GRAY
CSA, UL
94V-2
2-120527-1
TE Connectivity 2-120527-1 is a Telecom & Datacom Connector with 64 contacts, 0.039" pitch, and Liquid Crystal Polymer insulator. It has a durability of 100 cycles and operates b/w -55°C to 110°C. Ideal for commercial applications requiring polarized housing and solder termination on boards with PEG mounting option.
.238 inch
.329 inch
1.413 inch
45 mohm
LIQUID CRYSTAL POLYMER
0.039
110
3.6068
.8 A
.9906
64
5229913-1
TE Connectivity 5229913-1 is a EMI shielded connector with 50 contacts, suitable for telecom/datacom applications. Insulator made of PPO, operating temp range -40 to 75°C. Features IDC termination, rated current 1A, and supports cable mounting with wire sizes from 26-24 AWG.
.425 inch
#4-40
6116317-6
TE Connectivity 6116317-6 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 rated. Features include 4.655" body length, 500M ohm insulation resistance, and glass-filled PBT insulator. Ideal for telecom applications requiring high durability and signal integrity in a compact design.
.905 inch
4.655 inch
TIN OVER NICKEL
GLASS FILLED POLYBUTYLENE TEREPHTHALATE
70
.171 inch
5555764-3
TE Connectivity 5555764-3 is a telecom & datacom connector with 0.605" body length, 0.5" width, and insulator resistance of 500M ohm. It's used in applications requiring POLYAMIDE insulation material, SPLIT BOARD LOCK mounting option, and UL 94V-0 flammability code.
.14 inch
455600160
The Molex 455600160 is a Telecom & Datacom Connector with a mating contact pitch of 0.031", insulation resistance of 1Gohm, and dielectric voltage rating of 300VAC. It is used in applications requiring a male connector with surface mount termination for board mounting, featuring a polarized key and UL flammability rating of 94V-0.
HANDYLINK
.355 inch
.227 inch
.826 inch
300VAC
1.251
GLASS FILLED LIQUID CRYSTAL POLYMER
POLARIZED KEY
J0026D21BNL
Pulse Electronics
J0026D21BNL by Pulse Electronics is a telecom and datacom connector with a body length of 0.64 inch, body width of 0.545 inch, and body depth of 0.85 inch. It is used for board and panel mounting in applications such as telecommunications and data communication systems.
HOLE .12- .126
.545 inch
.85 inch
.64 inch
0 Cel
.13 inch
48037-2000
The Molex 48037-2000 is a USB connector with a body length of 0.472", body width of 0.177", and body depth of 0.74". It is commonly used in telecom and datacom applications, offering a rated current of 1.5A, insulation resistance of 1GΩ, and durability for up to 10,000 cycles.
.177 inch
.74 inch
.472 inch
500VAC
10000 Cycles
500254-1927
Molex 500254-1927 is a Telecom & Datacom Connector with 0.591" body length, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for board mounting with solderable retention clips, this male connector has a rated current of 0.5A and operates b/w -20 to 85°C.
ROHS COMPLIANT & 500 PCS/REEL
.243 inch
.478 inch
2.3352
500254
DETENT
.2502
500254-1931
The Molex 500254-1931 is a telecom/datacom connector with 0.591" body length, 0.632" width, and 0.478" depth. It offers 100000000 ohm insulation resistance and 500VAC dielectric voltage withstand. Ideal for board mounting with solderable retention clips, it has a rated current of 0.5A and operates b/w -20 to 85°C.
PANEL MOUNTABLE
.632 inch
M3X0.5
TIN-COPPER
PX0839/PC
Bulgin
PX0839/PC by Bulgin is a Telecom & Datacom Connector with 8 contacts, gold plating, and polybutylene terephthalate insulator. It has a body length of 1.77" and operates b/w -40°C to 70°C. Ideal for board and panel mounting in telecom and datacom applications.
EMI SHEILDED
.305 inch
1.77 inch
GOLD (50)
GOLD
10 mohm
POLYBUTYLENE TEREPHTHALATE
LATCH
2.04
2-212810-0
TE Connectivity 2-212810-0 is a Telecom & Datacom Connector with dimensions 2"x.915"x.75". Rated for 250V, it has GLASS FILLED PHENOLIC insulator and UL94V-0 flammability rating. With 34 contacts, it's ideal for telecom/datacom applications requiring board mounting and solder termination at temperatures ranging from -55 to 150°C.
.915 inch
.75 inch
2 inch
GLASS FILLED PHENOLIC
13A
0.18
6-32 UNC-2A
JACKSCREW
150
.3u
13 A
250 V
.12 inch
3.81
34
5-5175474-1
TE Connectivity 5-5175474-1 is a Telecom & Datacom Connector with 0.05" mating contact pitch, 1000000 ohm insulation resistance, and -55 to 85°C operating temperature range. Ideal for board mounting applications in telecommunications and data communication systems.
CHAMP
.295 inch
.891 inch
35 mohm
.8896
1000000 ohm
1.905
GLASS FILLED POLYAMIDE66
.122 inch
20
216444-1
TE Connectivity's 216444-1 is a Telecom & Datacom Connector with 0.539" body length, 0.748" width, and 0.472" depth. It has an insulation resistance of 500M ohm and operates b/w -40 to 70°C. Ideal for telecom applications, it features a split board lock mounting option and UL-rated durability of 750 cycles.
.748 inch
.539 inch
.11 inch
94-HB
216446-1
TE Connectivity 216446-1 is a Telecom & Datacom Connector with 0.52"x.618"x.472" dimensions, POLYAMIDE insulator, and 50u TIN OVER NICKEL plating. It has UL 94-HB rating, 6 contacts, and supports 1.5A signal current. Ideal for telecom/datacom applications requiring durable connectors with solder termination and board mounting options.
.618 inch
.52 inch
© 2023 All rights reserved
